[U-Boot] [PATCH 1/6] am33xx: Enable UART{1,2,4,5} clocks

[Marek Vasut]

Dear Andrew Bradford,

> If configured to use UART{1,2,4,5}, such as on the Beaglebone RS232
> cape, enable the required clocks for the UART in use.
> 
> Signed-off-by: Andrew Bradford <andrew at bradfordembedded.com>
> ---
>  arch/arm/cpu/armv7/am33xx/clock.c |   28 ++++++++++++++++++++++++++++
>  1 file changed, 28 insertions(+)
> 
> diff --git a/arch/arm/cpu/armv7/am33xx/clock.c
> b/arch/arm/cpu/armv7/am33xx/clock.c index 2b19506..4eb9226 100644
> --- a/arch/arm/cpu/armv7/am33xx/clock.c
> +++ b/arch/arm/cpu/armv7/am33xx/clock.c
> @@ -114,6 +114,34 @@ static void enable_per_clocks(void)
>  	while (readl(&cmwkup->wkup_uart0ctrl) != PRCM_MOD_EN)
>  		;
> 
> +	/* UART1 */
> +#ifdef CONFIG_SERIAL2
> +	writel(PRCM_MOD_EN, &cmper->uart1clkctrl);
> +	while (readl(&cmper->uart1clkctrl) != PRCM_MOD_EN)
> +		;

Call WATCHDOG_RESET() here, fix glboally

> +#endif /* CONFIG_SERIAL2 */
> +
> +	/* UART2 */
> +#ifdef CONFIG_SERIAL3
> +	writel(PRCM_MOD_EN, &cmper->uart2clkctrl);
> +	while (readl(&cmper->uart2clkctrl) != PRCM_MOD_EN)
> +		;
> +#endif /* CONFIG_SERIAL3 */
> +
> +	/* UART4 */
> +#ifdef CONFIG_SERIAL5
> +	writel(PRCM_MOD_EN, &cmper->uart4clkctrl);
> +	while (readl(&cmper->uart4clkctrl) != PRCM_MOD_EN)
> +		;
> +#endif /* CONFIG_SERIAL5 */
> +
> +	/* UART5 */
> +#ifdef CONFIG_SERIAL6
> +	writel(PRCM_MOD_EN, &cmper->uart5clkctrl);
> +	while (readl(&cmper->uart5clkctrl) != PRCM_MOD_EN)
> +		;
> +#endif /* CONFIG_SERIAL6 */
> +
>  	/* MMC0*/
>  	writel(PRCM_MOD_EN, &cmper->mmc0clkctrl);
>  	while (readl(&cmper->mmc0clkctrl) != PRCM_MOD_EN)

Best regards,
Marek Vasut