[U-Boot] [PATCH V4] i.MX6: mx6qsabrelite: Add splash screen support
Eric Nelson
eric.nelson at boundarydevices.com
Mon Sep 24 17:11:59 CEST 2012
Sorry Stefano,
On 09/24/2012 08:02 AM, Stefano Babic wrote:
> On 22/09/2012 00:53, Eric Nelson wrote:
>> Adds support for two LVDS panels and one RGB panel to the SABRE-Lite
>> board:
>> Hannstar-XGA - 1024 x 768 LVDS (Freescale part number MCIMX-LVDS1)
>> wsvga-lvds - 1024 x 600 LVDS (Boundary p/n Nit6X_1024x600)
>> wvga-rgb - 800 x 480 RGB (Boundary p/n Nit6X_800x480)
>>
>> Auto-detects panel by probing the I2C touch controller of each.
>>
>> Setting 'panel' environment variable to one of the names above will override
>> auto-detection.
>>
>> Signed-off-by: Eric Nelson<eric.nelson at boundarydevices.com>
>> ---
>
>
>> board/freescale/mx6qsabrelite/mx6qsabrelite.c | 245 ++++++++++++++++++++++++-
>> drivers/video/ipu_common.c | 2 +-
>> include/configs/mx6qsabrelite.h | 15 ++-
>> 3 files changed, 259 insertions(+), 3 deletions(-)
>
> Between V3 and V4 you changed also ipu_common.c, and that change does
> not apply.
>
>> /* address of boot parameters */
>> diff --git a/drivers/video/ipu_common.c b/drivers/video/ipu_common.c
>> index cc8f881..5f0a1a8 100644
>> --- a/drivers/video/ipu_common.c
>> +++ b/drivers/video/ipu_common.c
>> @@ -218,7 +218,7 @@ static struct clk ipu_clk = {
>> #else
>> .enable_reg = (u32 *)(CCM_BASE_ADDR +
>> offsetof(struct mxc_ccm_reg, CCGR3)),
>> - .enable_shift = MXC_CCM_CCGR3_IPU1_IPU_DI0_OFFSET,
>> + .enable_shift = MXC_CCM_CCGR3_IPU1_IPU_MASK,
>
> But in ipu_common.c:
>
> .enable_reg = (u32 *)(CCM_BASE_ADDR +
> offsetof(struct mxc_ccm_reg, CCGR5)),
> .enable_shift = MXC_CCM_CCGR5_CG5_OFFSET,
>
CCGR5/CG5 is the IPU clock on i.MX5x, not i.MX6x.
> I do not see another patch changing that. Am I missing something ?
>
This patch requires the previous change to name the CCGRx bitfields:
http://patchwork.ozlabs.org/patch/185856/
Regards,
Eric
More information about the U-Boot
mailing list