[U-Boot] [PATCH V4] i.MX6: mx6qsabrelite: Add splash screen support
Stefano Babic
sbabic at denx.de
Mon Sep 24 17:02:56 CEST 2012
On 22/09/2012 00:53, Eric Nelson wrote:
> Adds support for two LVDS panels and one RGB panel to the SABRE-Lite
> board:
> Hannstar-XGA - 1024 x 768 LVDS (Freescale part number MCIMX-LVDS1)
> wsvga-lvds - 1024 x 600 LVDS (Boundary p/n Nit6X_1024x600)
> wvga-rgb - 800 x 480 RGB (Boundary p/n Nit6X_800x480)
>
> Auto-detects panel by probing the I2C touch controller of each.
>
> Setting 'panel' environment variable to one of the names above will override
> auto-detection.
>
> Signed-off-by: Eric Nelson <eric.nelson at boundarydevices.com>
> ---
> board/freescale/mx6qsabrelite/mx6qsabrelite.c | 245 ++++++++++++++++++++++++-
> drivers/video/ipu_common.c | 2 +-
> include/configs/mx6qsabrelite.h | 15 ++-
> 3 files changed, 259 insertions(+), 3 deletions(-)
Between V3 and V4 you changed also ipu_common.c, and that change does
not apply.
> /* address of boot parameters */
> diff --git a/drivers/video/ipu_common.c b/drivers/video/ipu_common.c
> index cc8f881..5f0a1a8 100644
> --- a/drivers/video/ipu_common.c
> +++ b/drivers/video/ipu_common.c
> @@ -218,7 +218,7 @@ static struct clk ipu_clk = {
> #else
> .enable_reg = (u32 *)(CCM_BASE_ADDR +
> offsetof(struct mxc_ccm_reg, CCGR3)),
> - .enable_shift = MXC_CCM_CCGR3_IPU1_IPU_DI0_OFFSET,
> + .enable_shift = MXC_CCM_CCGR3_IPU1_IPU_MASK,
But in ipu_common.c:
.enable_reg = (u32 *)(CCM_BASE_ADDR +
offsetof(struct mxc_ccm_reg, CCGR5)),
.enable_shift = MXC_CCM_CCGR5_CG5_OFFSET,
I do not see another patch changing that. Am I missing something ?
Best regards,
Stefano
--
=====================================================================
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================
More information about the U-Boot
mailing list