[U-Boot] [PATCH 1/6] h2200: Add support for iPAQ h2200

[Łukasz Dałek]

On 22.09.2012 20:21, Marek Vasut wrote:
>>>>>>>> +{
>>>>>>>> +	writel(val, addr);
>>>>>>>> +	asm volatile("" : : : "memory");
>>>>>>>> +	readl(addr);
>>>>>>>> +	asm volatile("" : : : "memory");
>>>>>>>> +}
>>>>>>>> +
>>>>>>>> +static void h2200_pxa2xx_dram_init(void)
>>>>>>> Why do you duplicate it ?!
>>>>>>>
>>>>>>> [...]
>>>>>> Because code in pxa2xx.c disable and then re-enable memory.
>>>>>> And u-boot is executed from memory (1st stage bootloder
>>>>>> copied it there).
>>>>> So don't reinit the memory at all, just skip this whole part.
>>>> 1st stage loader doesn't init everything (for example MSC).
>>> So I checked ... every board calls the dram init on it's own in
>>> dram_init() ... so just don't do that.
>> Do what? Don't call modified pxa2xx_dram_init?
> What exactly do you need to do ? What registers do you need to set ? How come
> the bootloader kick dram in, but won't configure MSC ?
>
> Split out the MSC config and memory config maybe ?

Ok, I will rewrite that.

Łukasz Dałek