[U-Boot] Help Required [imx35pdk]

[Fabio Estevam]

Hi Stefano,

On Wed, Sep 12, 2012 at 6:44 PM, stefano babic <sbabic at denx.de> wrote:

> U-Boot for mx35pdk runs from NOR and not from NAND. There is no support
> to run from NAND. Even if I can "convince" the board to boot from NAND,
> this was not pushed to mainline. I explain why.

Reading board/freescale/mx35pdk/README it gives the impression that
booting from NAND is supported.

Should this be updated?

Regards,

Fabio Estevam