[U-Boot] [PATCH v2 2/6] pxa25x: Add support for USB ethernet gadget

[Łukasz Dałek]

On 23.09.2012 21:32, Marek Vasut wrote:
> Dear Łukasz Dałek,
>
>> On 23.09.2012 20:24, Marek Vasut wrote:
>>> Dear Łukasz Dałek,
>>>
>>>> On 23.09.2012 17:44, Marek Vasut wrote:
>>>>> Dear Lukasz Dalek,
>>>>>
>>>>>> Add to pxa25x based devices support for USB ethernet gadget. This is a
>>>>>> port of pxa25x UDC driver from Linux kernel.
>>>>>>
>>>>>> Signed-off-by: Lukasz Dalek<luk0104 at gmail.com>
>>>>>> ---
>>>>>>
>>>>>>     drivers/usb/gadget/Makefile     |    1 +
>>>>>>     drivers/usb/gadget/pxa25x_udc.c | 2059
>>>>>>
>>>>>> +++++++++++++++++++++++++++++++++++++++
>>>>>> drivers/usb/gadget/pxa25x_udc.h
>>>>>>
>>>>>> | 162 +++
>>>>>> |
>>>>>>     3 files changed, 2222 insertions(+), 0 deletions(-)
>>>>>>     create mode 100644 drivers/usb/gadget/pxa25x_udc.c
>>>>>>     create mode 100644 drivers/usb/gadget/pxa25x_udc.h
>>>>> [...]
>>>>>
>>>>> So what's the change here? Or is it a repost?
>>>>>
>>>>> Best regards,
>>>>> Marek Vasut
>>>> Everything was fine except DEBUG_NOISY defintions. I fixed them and
>>>> I have resend patch.
>>> http://www.denx.de/wiki/U-Boot/Patches did you read this? Worth reading
>>> so I don't have to repeat myself ;-)
>> Yes.
>>
>>>> Can I ask what about patches 3,4,5,6?
>>> I think they're fine ... did you do any changes to them ?
>> If they are ok then my job is done :-)
> You did not answer my question ... and no, your job isn't done ... once your
> code is mainline, you're the maintainer, every change to common code will also
> be your responsibility to at least review/test on your hardware etc ... you know
> the drill.
>
> Even though PXA is semi-dead, so I don't expect much happening there.

No, since last email I didn't change anything.

But for now you have said that they're fine, so all I have to wait. Am I 
wrong?

Łukasz Dałek