[U-Boot] [PATCH] mx6qsabreauto: Use ttymxc3 as console

[Stefano Babic]

On 26/09/2012 23:37, Otavio Salvador wrote:
> The mx6qsabreauto console is different than mx6qsabresd so the console
> configuration is now set in the board file.
> 
> Signed-off-by: Otavio Salvador <otavio at ossystems.com.br>
> ---
>  include/configs/mx6qsabre_common.h |    2 +-
>  include/configs/mx6qsabreauto.h    |    4 +++-
>  include/configs/mx6qsabresd.h      |    4 +++-
>  3 files changed, 7 insertions(+), 3 deletions(-)
> 
> diff --git a/include/configs/mx6qsabre_common.h b/include/configs/mx6qsabre_common.h
> index c541691..1d52b52 100644
> --- a/include/configs/mx6qsabre_common.h
> +++ b/include/configs/mx6qsabre_common.h
> @@ -83,7 +83,7 @@
>  #define CONFIG_EXTRA_ENV_SETTINGS \
>  	"script=boot.scr\0" \
>  	"uimage=uImage\0" \
> -	"console=ttymxc0\0" \
> +	"console=" CONFIG_CONSOLE_DEV "\0" \
>  	"fdt_high=0xffffffff\0"	  \
>  	"initrd_high=0xffffffff\0" \
>  	"mmcdev=0\0" \
> diff --git a/include/configs/mx6qsabreauto.h b/include/configs/mx6qsabreauto.h
> index 825d3b8..a878dec 100644
> --- a/include/configs/mx6qsabreauto.h
> +++ b/include/configs/mx6qsabreauto.h
> @@ -11,10 +11,12 @@
>  
>  #ifndef __MX6QSABREAUTO_CONFIG_H
>  #define __MX6QSABREAUTO_CONFIG_H
> -#include "mx6qsabre_common.h"
>  
>  #define CONFIG_MACH_TYPE	3529
>  #define CONFIG_MXC_UART_BASE	UART4_BASE
> +#define CONFIG_CONSOLE_DEV		"ttymxc3"
>  #define PHYS_SDRAM_SIZE		(2u * 1024 * 1024 * 1024)
>  
> +#include "mx6qsabre_common.h"
> +
>  #endif                         /* __MX6QSABREAUTO_CONFIG_H */
> diff --git a/include/configs/mx6qsabresd.h b/include/configs/mx6qsabresd.h
> index ca91aa5..f2ce79e 100644
> --- a/include/configs/mx6qsabresd.h
> +++ b/include/configs/mx6qsabresd.h
> @@ -16,10 +16,12 @@
>  
>  #ifndef __MX6QSABRESD_CONFIG_H
>  #define __MX6QSABRESD_CONFIG_H
> -#include "mx6qsabre_common.h"
>  
>  #define CONFIG_MACH_TYPE	3980
>  #define CONFIG_MXC_UART_BASE	UART1_BASE
> +#define CONFIG_CONSOLE_DEV		"ttymxc0"
>  #define PHYS_SDRAM_SIZE		(1u * 1024 * 1024 * 1024)
>  
> +#include "mx6qsabre_common.h"
> +
>  #endif                         /* __MX6QSABRESD_CONFIG_H */
> 

Nothing to say, console must be in sync with CONFIG_MXC_UART_BASE.


Acked-by: Stefano Babic <sbabic at denx.de>

Best regards,
Stefano Babic


-- 
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================