[U-Boot] [PATCH 2/3] mx6qsabrelite: Change default environment to cope with OE changes

[Robert Nelson]

On Wed, Sep 19, 2012 at 1:00 PM, Otavio Salvador
<otavio at ossystems.com.br> wrote:
> On Wed, Sep 19, 2012 at 2:57 PM, Robert Nelson <robertcnelson at gmail.com> wrote:
>> On Wed, Sep 19, 2012 at 10:13 AM, Otavio Salvador
>> <otavio at ossystems.com.br> wrote:
>>> OpenEmbedded has change partitioning layout of generated image so it
>>> does not raise warnings during the boot regarding unkown partition
>>> being used for U-Boot.
>>>
>>> Signed-off-by: Otavio Salvador <otavio at ossystems.com.br>
>>> ---
>>>  include/configs/mx6qsabrelite.h |    8 +++-----
>>>  1 file changed, 3 insertions(+), 5 deletions(-)
>>>
>>> diff --git a/include/configs/mx6qsabrelite.h b/include/configs/mx6qsabrelite.h
>>> index 72d0154..0d5fd40 100644
>>> --- a/include/configs/mx6qsabrelite.h
>>> +++ b/include/configs/mx6qsabrelite.h
>>> @@ -141,12 +141,10 @@
>>>  #define CONFIG_EXTRA_ENV_SETTINGS \
>>>         "script=boot.scr\0" \
>>>         "uimage=uImage\0" \
>>> -       "console=ttymxc1\0" \
>>> -       "fdt_high=0xffffffff\0"   \
>>> -       "initrd_high=0xffffffff\0" \
>>
>> Your going to need fdt_high/initrd_high for when using linux device tree's...
>
> I am not against keeping it but it is not used right now.

It may not be used in openembedded, but device tree is the only option
for a pure mainline kernel for this board, so it's needed. ;)

Regards,

-- 
Robert Nelson
http://www.rcn-ee.com/