[U-Boot] [PATCH] mxc: Fix SDHC multi-instance clock

Benoît Thébaudeau benoit.thebaudeau at advansee.com
Fri Sep 28 15:09:45 CEST 2012


On Thursday, September 27, 2012 10:31:02 PM, Benoît Thébaudeau wrote:
> On mxc, each SDHC instance has a dedicated clock, so gd->sdhc_clk is
> not
> suitable for the multi-instance use case (initialization made
> directly with
> fsl_esdhc_initialize()).
> 
> This patch fixes this issue by adding a configuration field for the
> SDHC input
> clock frequency.
> 
> Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau at advansee.com>
> Cc: Stefano Babic <sbabic at denx.de>
> Cc: Eric Bénard <eric at eukrea.com>
> Cc: Otavio Salvador <otavio at ossystems.com.br>
> Cc: Fabio Estevam <fabio.estevam at freescale.com>
> Cc: Jason Liu <r64343 at freescale.com>
> Cc: Matt Sealey <matt at genesi-usa.com>
> Cc: Andy Fleming <afleming at gmail.com>
> ---
> This patch should be applied after (series of series...):
> http://patchwork.ozlabs.org/patch/187467/
> http://patchwork.ozlabs.org/patch/187468/
> http://patchwork.ozlabs.org/patch/187475/
> 
>  .../board/esg/ima3-mx53/ima3-mx53.c                |    1 +
>  .../board/freescale/mx35pdk/mx35pdk.c              |    2 ++
>  .../board/freescale/mx51evk/mx51evk.c              |    4 ++++
>  .../board/freescale/mx53ard/mx53ard.c              |    4 ++++
>  .../board/freescale/mx53evk/mx53evk.c              |    4 ++++
>  .../board/freescale/mx53loco/mx53loco.c            |    3 +++
>  .../board/freescale/mx53smd/mx53smd.c              |    3 +++
>  .../board/freescale/mx6qarm2/mx6qarm2.c            |    4 ++++
>  .../board/freescale/mx6qsabrelite/mx6qsabrelite.c  |    3 +++
>  .../board/genesi/mx51_efikamx/efikamx.c            |    4 ++++
>  .../board/ttcontrol/vision2/vision2.c              |    2 ++
>  .../drivers/mmc/fsl_esdhc.c                        |    5 +++--
>  .../include/fsl_esdhc.h                            |    1 +
>  13 files changed, 38 insertions(+), 2 deletions(-)
> 
> diff --git u-boot-imx-e1eb75b.orig/board/esg/ima3-mx53/ima3-mx53.c
> u-boot-imx-e1eb75b/board/esg/ima3-mx53/ima3-mx53.c
> index e947330..41d6bb6 100644
> --- u-boot-imx-e1eb75b.orig/board/esg/ima3-mx53/ima3-mx53.c
> +++ u-boot-imx-e1eb75b/board/esg/ima3-mx53/ima3-mx53.c
> @@ -217,6 +217,7 @@ int board_mmc_init(bd_t *bis)
>  		PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH | PAD_CTL_PUE_PULL |
>  		PAD_CTL_PKE_ENABLE | PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU);
>  
> +	esdhc_cfg.sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK);
>  	return fsl_esdhc_initialize(bis, &esdhc_cfg);
>  }
>  #endif
> diff --git u-boot-imx-e1eb75b.orig/board/freescale/mx35pdk/mx35pdk.c
> u-boot-imx-e1eb75b/board/freescale/mx35pdk/mx35pdk.c
> index 7cb6b30..a12531f 100644
> --- u-boot-imx-e1eb75b.orig/board/freescale/mx35pdk/mx35pdk.c
> +++ u-boot-imx-e1eb75b/board/freescale/mx35pdk/mx35pdk.c
> @@ -27,6 +27,7 @@
>  #include <asm/errno.h>
>  #include <asm/arch/imx-regs.h>
>  #include <asm/arch/crm_regs.h>
> +#include <asm/arch/clock.h>
>  #include <asm/arch/mx35_pins.h>
>  #include <asm/arch/iomux.h>
>  #include <i2c.h>
> @@ -292,6 +293,7 @@ int board_mmc_init(bd_t *bis)
>  	mxc_request_iomux(MX35_PIN_SD1_DATA2, MUX_CONFIG_FUNC);
>  	mxc_request_iomux(MX35_PIN_SD1_DATA3, MUX_CONFIG_FUNC);
>  
> +	esdhc_cfg.sdhc_clk = mxc_get_clock(MXC_ESDHC1_CLK);
>  	return fsl_esdhc_initialize(bis, &esdhc_cfg);
>  }
>  
> diff --git u-boot-imx-e1eb75b.orig/board/freescale/mx51evk/mx51evk.c
> u-boot-imx-e1eb75b/board/freescale/mx51evk/mx51evk.c
> index a94701c..3412952 100644
> --- u-boot-imx-e1eb75b.orig/board/freescale/mx51evk/mx51evk.c
> +++ u-boot-imx-e1eb75b/board/freescale/mx51evk/mx51evk.c
> @@ -29,6 +29,7 @@
>  #include <asm/errno.h>
>  #include <asm/arch/sys_proto.h>
>  #include <asm/arch/crm_regs.h>
> +#include <asm/arch/clock.h>
>  #include <i2c.h>
>  #include <mmc.h>
>  #include <fsl_esdhc.h>
> @@ -358,6 +359,9 @@ int board_mmc_init(bd_t *bis)
>  	u32 index;
>  	s32 status = 0;
>  
> +	esdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK);
> +	esdhc_cfg[1].sdhc_clk = mxc_get_clock(MXC_ESDHC2_CLK);
> +
>  	for (index = 0; index < CONFIG_SYS_FSL_ESDHC_NUM;
>  			index++) {
>  		switch (index) {
> diff --git u-boot-imx-e1eb75b.orig/board/freescale/mx53ard/mx53ard.c
> u-boot-imx-e1eb75b/board/freescale/mx53ard/mx53ard.c
> index 08c7795..2fc8570 100644
> --- u-boot-imx-e1eb75b.orig/board/freescale/mx53ard/mx53ard.c
> +++ u-boot-imx-e1eb75b/board/freescale/mx53ard/mx53ard.c
> @@ -26,6 +26,7 @@
>  #include <asm/arch/mx5x_pins.h>
>  #include <asm/arch/sys_proto.h>
>  #include <asm/arch/crm_regs.h>
> +#include <asm/arch/clock.h>
>  #include <asm/arch/iomux.h>
>  #include <asm/errno.h>
>  #include <netdev.h>
> @@ -106,6 +107,9 @@ int board_mmc_init(bd_t *bis)
>  	u32 index;
>  	s32 status = 0;
>  
> +	esdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK);
> +	esdhc_cfg[1].sdhc_clk = mxc_get_clock(MXC_ESDHC2_CLK);
> +
>  	for (index = 0; index < CONFIG_SYS_FSL_ESDHC_NUM; index++) {
>  		switch (index) {
>  		case 0:
> diff --git u-boot-imx-e1eb75b.orig/board/freescale/mx53evk/mx53evk.c
> u-boot-imx-e1eb75b/board/freescale/mx53evk/mx53evk.c
> index b11a94c..bb4621d 100644
> --- u-boot-imx-e1eb75b.orig/board/freescale/mx53evk/mx53evk.c
> +++ u-boot-imx-e1eb75b/board/freescale/mx53evk/mx53evk.c
> @@ -26,6 +26,7 @@
>  #include <asm/arch/mx5x_pins.h>
>  #include <asm/arch/sys_proto.h>
>  #include <asm/arch/crm_regs.h>
> +#include <asm/arch/clock.h>
>  #include <asm/arch/iomux.h>
>  #include <asm/errno.h>
>  #include <asm/imx-common/boot_mode.h>
> @@ -232,6 +233,9 @@ int board_mmc_init(bd_t *bis)
>  	u32 index;
>  	s32 status = 0;
>  
> +	esdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK);
> +	esdhc_cfg[1].sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK);
> +
>  	for (index = 0; index < CONFIG_SYS_FSL_ESDHC_NUM; index++) {
>  		switch (index) {
>  		case 0:
> diff --git
> u-boot-imx-e1eb75b.orig/board/freescale/mx53loco/mx53loco.c
> u-boot-imx-e1eb75b/board/freescale/mx53loco/mx53loco.c
> index 8f82125..8f9b8df 100644
> --- u-boot-imx-e1eb75b.orig/board/freescale/mx53loco/mx53loco.c
> +++ u-boot-imx-e1eb75b/board/freescale/mx53loco/mx53loco.c
> @@ -192,6 +192,9 @@ int board_mmc_init(bd_t *bis)
>  	u32 index;
>  	s32 status = 0;
>  
> +	esdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK);
> +	esdhc_cfg[1].sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK);
> +
>  	for (index = 0; index < CONFIG_SYS_FSL_ESDHC_NUM; index++) {
>  		switch (index) {
>  		case 0:
> diff --git u-boot-imx-e1eb75b.orig/board/freescale/mx53smd/mx53smd.c
> u-boot-imx-e1eb75b/board/freescale/mx53smd/mx53smd.c
> index 7f35ddd..761f727 100644
> --- u-boot-imx-e1eb75b.orig/board/freescale/mx53smd/mx53smd.c
> +++ u-boot-imx-e1eb75b/board/freescale/mx53smd/mx53smd.c
> @@ -26,6 +26,7 @@
>  #include <asm/arch/mx5x_pins.h>
>  #include <asm/arch/sys_proto.h>
>  #include <asm/arch/crm_regs.h>
> +#include <asm/arch/clock.h>
>  #include <asm/arch/iomux.h>
>  #include <asm/errno.h>
>  #include <netdev.h>
> @@ -144,6 +145,8 @@ int board_mmc_init(bd_t *bis)
>  	u32 index;
>  	s32 status = 0;
>  
> +	esdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK);
> +
>  	for (index = 0; index < CONFIG_SYS_FSL_ESDHC_NUM; index++) {
>  		switch (index) {
>  		case 0:
> diff --git
> u-boot-imx-e1eb75b.orig/board/freescale/mx6qarm2/mx6qarm2.c
> u-boot-imx-e1eb75b/board/freescale/mx6qarm2/mx6qarm2.c
> index d43b327..dad4b95 100644
> --- u-boot-imx-e1eb75b.orig/board/freescale/mx6qarm2/mx6qarm2.c
> +++ u-boot-imx-e1eb75b/board/freescale/mx6qarm2/mx6qarm2.c
> @@ -24,6 +24,7 @@
>  #include <asm/io.h>
>  #include <asm/arch/imx-regs.h>
>  #include <asm/arch/mx6x_pins.h>
> +#include <asm/arch/clock.h>
>  #include <asm/errno.h>
>  #include <asm/gpio.h>
>  #include <asm/imx-common/iomux-v3.h>
> @@ -139,6 +140,9 @@ int board_mmc_init(bd_t *bis)
>  	s32 status = 0;
>  	u32 index = 0;
>  
> +	usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK);
> +	usdhc_cfg[1].sdhc_clk = mxc_get_clock(MXC_ESDHC4_CLK);
> +
>  	for (index = 0; index < CONFIG_SYS_FSL_USDHC_NUM; ++index) {
>  		switch (index) {
>  		case 0:
> diff --git
> u-boot-imx-e1eb75b.orig/board/freescale/mx6qsabrelite/mx6qsabrelite.c
> u-boot-imx-e1eb75b/board/freescale/mx6qsabrelite/mx6qsabrelite.c
> index 4b4e89b..3af8437 100644
> ---
> u-boot-imx-e1eb75b.orig/board/freescale/mx6qsabrelite/mx6qsabrelite.c
> +++ u-boot-imx-e1eb75b/board/freescale/mx6qsabrelite/mx6qsabrelite.c
> @@ -264,6 +264,9 @@ int board_mmc_init(bd_t *bis)
>         s32 status = 0;
>         u32 index = 0;
>  
> +	usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK);
> +	usdhc_cfg[1].sdhc_clk = mxc_get_clock(MXC_ESDHC4_CLK);
> +
>         for (index = 0; index < CONFIG_SYS_FSL_USDHC_NUM; ++index) {
>  	       switch (index) {
>  	       case 0:
> diff --git
> u-boot-imx-e1eb75b.orig/board/genesi/mx51_efikamx/efikamx.c
> u-boot-imx-e1eb75b/board/genesi/mx51_efikamx/efikamx.c
> index cfd2e93..e334c01 100644
> --- u-boot-imx-e1eb75b.orig/board/genesi/mx51_efikamx/efikamx.c
> +++ u-boot-imx-e1eb75b/board/genesi/mx51_efikamx/efikamx.c
> @@ -29,6 +29,7 @@
>  #include <asm/errno.h>
>  #include <asm/arch/sys_proto.h>
>  #include <asm/arch/crm_regs.h>
> +#include <asm/arch/clock.h>
>  #include <i2c.h>
>  #include <mmc.h>
>  #include <fsl_esdhc.h>
> @@ -349,6 +350,9 @@ int board_mmc_init(bd_t *bis)
>  		gpio_direction_input(EFIKASB_SDHC1_CD);
>  	}
>  
> +	esdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK);
> +	esdhc_cfg[1].sdhc_clk = mxc_get_clock(MXC_ESDHC2_CLK);
> +
>  	ret = fsl_esdhc_initialize(bis, &esdhc_cfg[0]);
>  
>  	if (machine_is_efikasb()) {
> diff --git u-boot-imx-e1eb75b.orig/board/ttcontrol/vision2/vision2.c
> u-boot-imx-e1eb75b/board/ttcontrol/vision2/vision2.c
> index f28eab0..ba3307b 100644
> --- u-boot-imx-e1eb75b.orig/board/ttcontrol/vision2/vision2.c
> +++ u-boot-imx-e1eb75b/board/ttcontrol/vision2/vision2.c
> @@ -28,6 +28,7 @@
>  #include <asm/arch/imx-regs.h>
>  #include <asm/arch/mx5x_pins.h>
>  #include <asm/arch/crm_regs.h>
> +#include <asm/arch/clock.h>
>  #include <asm/arch/iomux.h>
>  #include <asm/gpio.h>
>  #include <asm/arch/sys_proto.h>
> @@ -590,6 +591,7 @@ int board_mmc_init(bd_t *bis)
>  	mxc_iomux_set_pad(MX51_PIN_GPIO1_1,
>  		PAD_CTL_HYS_ENABLE);
>  
> +	esdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK);
>  	return fsl_esdhc_initialize(bis, &esdhc_cfg[0]);
>  }
>  #endif
> diff --git u-boot-imx-e1eb75b.orig/drivers/mmc/fsl_esdhc.c
> u-boot-imx-e1eb75b/drivers/mmc/fsl_esdhc.c
> index 3f8d30d..aa6a9f1 100644
> --- u-boot-imx-e1eb75b.orig/drivers/mmc/fsl_esdhc.c
> +++ u-boot-imx-e1eb75b/drivers/mmc/fsl_esdhc.c
> @@ -410,12 +410,12 @@ esdhc_send_cmd(struct mmc *mmc, struct mmc_cmd
> *cmd, struct mmc_data *data)
>  	return 0;
>  }
>  
> -void set_sysctl(struct mmc *mmc, uint clock)
> +static void set_sysctl(struct mmc *mmc, uint clock)
>  {
> -	int sdhc_clk = gd->sdhc_clk;
>  	int div, pre_div;
>  	struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv;
>  	volatile struct fsl_esdhc *regs = (struct fsl_esdhc
>  	*)cfg->esdhc_base;
> +	int sdhc_clk = cfg->sdhc_clk;
>  	uint clk;
>  
>  	if (clock < mmc->f_min)
> @@ -598,6 +598,7 @@ int fsl_esdhc_mmc_init(bd_t *bis)
>  	cfg = malloc(sizeof(struct fsl_esdhc_cfg));
>  	memset(cfg, 0, sizeof(struct fsl_esdhc_cfg));
>  	cfg->esdhc_base = CONFIG_SYS_FSL_ESDHC_ADDR;
> +	cfg->sdhc_clk = gd->sdhc_clk;
>  	return fsl_esdhc_initialize(bis, cfg);
>  }
>  
> diff --git u-boot-imx-e1eb75b.orig/include/fsl_esdhc.h
> u-boot-imx-e1eb75b/include/fsl_esdhc.h
> index 4e321e7..47d2fe4 100644
> --- u-boot-imx-e1eb75b.orig/include/fsl_esdhc.h
> +++ u-boot-imx-e1eb75b/include/fsl_esdhc.h
> @@ -167,6 +167,7 @@
>  
>  struct fsl_esdhc_cfg {
>  	u32	esdhc_base;
> +	u32	sdhc_clk;
>  };
>  
>  /* Select the correct accessors depending on endianess */
> 

Note that, just like for http://patchwork.ozlabs.org/patch/187454/, this will
have to be extended to new boards like mx6qsabresd if this is applied to
u-boot-imx/next rather than to u-boot-imx/master.

Best regards,
Benoît


More information about the U-Boot mailing list