[U-Boot] [PATCH v4 10/11] Add u-boot-pad.bin target to the Makefile

[José Miguel Gonçalves]

On 19-09-2012 18:08, Scott Wood wrote:
> On 09/19/2012 11:58:06 AM, José Miguel Gonçalves wrote:
>> On 19-09-2012 17:10, Scott Wood wrote:
>>> On 09/19/2012 06:25:26 AM, José Miguel Gonçalves wrote:
>>>> Samsung's S3C24XX SoCs need this in order to generate a binary image
>>>> with a padded SPL concatenated with U-Boot.
>>>
>>> I still think "pad" is a lousy name for this.  It refers to a minor 
>>> implementation detail of how the image was put together.
>>>
>>> If you don't like the suggestions in 
>>> http://lists.denx.de/pipermail/u-boot/2012-September/134191.html, how about
>>> "u-boot-with-spl.bin"?
>>
>> I used a suggestion made by Christian Riesch and accepted by Tom Rini.
>>
>> I'm totally cool with any name that the U-Boot core maintainers would like to 
>> use, though I would prefer a shorter name than "u-boot-with-spl.bin" because 
>> I'm lazy and don't like to type too many keys when I upgrade by tftp :-) 
>> Because of that I think I would prefer "u-boot-all.bin". So, everybody agrees 
>> with that name?
>
> setenv uboot pathname/u-boot-with-as-much-verbosity-as-you-want.bin
> setenv tftpnand 'tftp $loadaddr $uboot && nand erase 0 $filesize && nand write 
> $loadaddr 0 $filesize'
> saveenv
> run tftpnand

I already had a script but only for the nand programming part.
I suppose the '&&' on the command line is for conditional execution, right?
In my u-boot that does not work, but looking at the README, I see that I need 
CONFIG_SYS_HUSH_PARSER for it.
I'll give it a try. Thanks!