[U-Boot] [PATCH v2 09/14] mx5 clocks: Fix get_ipg_per_clk()

[Stefano Babic]

On 28/09/2012 14:55, Benoît Thébaudeau wrote:

>>
>> Ah, thanks - it is clear now.
> 
> For the full story, I²C was completely broken on my custom i.MX51 platform
> because of this issue. The command "i2c probe" only detected address 0x00, and
> if run again, it hung.

Ok - this explains to myself why I have never noted - I used SPI on MX51
for PMIC, and I2C on MX53.

Regards,
Stefano

-- 
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================