[U-Boot] [PATCH v1 2/4] mpc83xx: add support for mpc8309
Gerlando Falauto
gerlando.falauto at keymile.com
Wed Sep 26 10:28:08 CEST 2012
This processor, though very similar to other members of the
PowerQUICC II Pro family (namely 8308, 8360 and 832x), provides
yet another feature set than any supported sibling.
So we add a bunch of new #ifdefs (or complicate the existing ones)
to arch/powerpc/cpu/mpc83xx/speed.c.
Perhaps it would be worth to refactor the whole file so to first
identify the featureset of the given CPU, and enclose each block within
#ifdef CONFIG_MPC83XX_FEAT_XXXX
for instance:
- CONFIG_MPC83XX_FEAT_USBDR
- CONFIG_MPC83XX_FEAT_QE
- CONFIG_MPC83XX_FEAT_DDRSEC
...etc...
Signed-off-by: Gerlando Falauto <gerlando.falauto at keymile.com>
---
arch/powerpc/cpu/mpc83xx/cpu.c | 1 +
arch/powerpc/cpu/mpc83xx/cpu_init.c | 3 +
arch/powerpc/cpu/mpc83xx/speed.c | 30 +++++-
arch/powerpc/include/asm/global_data.h | 2 +
arch/powerpc/include/asm/immap_83xx.h | 65 ++++++++++++-
arch/powerpc/include/asm/immap_qe.h | 2 +-
drivers/qe/qe.c | 21 +++--
include/mpc83xx.h | 156 +++++++++++++++++++++++++++++++-
8 files changed, 263 insertions(+), 17 deletions(-)
diff --git a/arch/powerpc/cpu/mpc83xx/cpu.c b/arch/powerpc/cpu/mpc83xx/cpu.c
index 6635109..e64b0c3 100644
--- a/arch/powerpc/cpu/mpc83xx/cpu.c
+++ b/arch/powerpc/cpu/mpc83xx/cpu.c
@@ -56,6 +56,7 @@ int checkcpu(void)
u32 partid;
} cpu_type_list [] = {
CPU_TYPE_ENTRY(8308),
+ CPU_TYPE_ENTRY(8309),
CPU_TYPE_ENTRY(8311),
CPU_TYPE_ENTRY(8313),
CPU_TYPE_ENTRY(8314),
diff --git a/arch/powerpc/cpu/mpc83xx/cpu_init.c b/arch/powerpc/cpu/mpc83xx/cpu_init.c
index 76afba5..20d0600 100644
--- a/arch/powerpc/cpu/mpc83xx/cpu_init.c
+++ b/arch/powerpc/cpu/mpc83xx/cpu_init.c
@@ -268,6 +268,9 @@ void cpu_init_f (volatile immap_t * im)
#ifdef CONFIG_SYS_SICRL
__raw_writel(CONFIG_SYS_SICRL, &im->sysconf.sicrl);
#endif
+#ifdef CONFIG_SYS_GPR1
+ __raw_writel(CONFIG_SYS_GPR1, &im->sysconf.gpr1);
+#endif
#ifdef CONFIG_SYS_DDRCDR /* DDR control driver register */
__raw_writel(CONFIG_SYS_DDRCDR, &im->sysconf.ddrcdr);
#endif
diff --git a/arch/powerpc/cpu/mpc83xx/speed.c b/arch/powerpc/cpu/mpc83xx/speed.c
index f78099d..06ed86f 100644
--- a/arch/powerpc/cpu/mpc83xx/speed.c
+++ b/arch/powerpc/cpu/mpc83xx/speed.c
@@ -105,6 +105,8 @@ int get_clocks(void)
u32 tsec1_clk;
u32 tsec2_clk;
u32 usbdr_clk;
+#elif defined(CONFIG_MPC8309)
+ u32 usbdr_clk;
#endif
#ifdef CONFIG_MPC834x
u32 usbmph_clk;
@@ -120,14 +122,17 @@ int get_clocks(void)
#if defined(CONFIG_FSL_ESDHC)
u32 sdhc_clk;
#endif
+#if !defined(CONFIG_MPC8309)
u32 enc_clk;
+#endif
u32 lbiu_clk;
u32 lclk_clk;
u32 mem_clk;
#if defined(CONFIG_MPC8360)
u32 mem_sec_clk;
#endif
-#if defined(CONFIG_MPC8360) || defined(CONFIG_MPC832x)
+#if defined(CONFIG_MPC8309) || defined(CONFIG_MPC8360) || \
+ defined(CONFIG_MPC832x)
u32 qepmf;
u32 qepdf;
u32 qe_clk;
@@ -185,7 +190,10 @@ int get_clocks(void)
/* unkown SCCR_TSEC1CM value */
return -2;
}
+#endif
+#if defined(CONFIG_MPC8309) || defined(CONFIG_MPC831x) || \
+ defined(CONFIG_MPC834x) || defined(CONFIG_MPC837x)
switch ((sccr & SCCR_USBDRCM) >> SCCR_USBDRCM_SHIFT) {
case 0:
usbdr_clk = 0;
@@ -260,6 +268,7 @@ int get_clocks(void)
return -6;
}
#endif
+#if !defined(CONFIG_MPC8309)
switch ((sccr & SCCR_ENCCM) >> SCCR_ENCCM_SHIFT) {
case 0:
enc_clk = 0;
@@ -277,6 +286,7 @@ int get_clocks(void)
/* unkown SCCR_ENCCM value */
return -7;
}
+#endif
#if defined(CONFIG_FSL_ESDHC)
switch ((sccr & SCCR_SDHCCM) >> SCCR_SDHCCM_SHIFT) {
@@ -329,6 +339,8 @@ int get_clocks(void)
i2c1_clk = sdhc_clk;
#elif defined(CONFIG_MPC837x)
i2c1_clk = enc_clk;
+#elif defined(CONFIG_MPC8309)
+ i2c1_clk = csb_clk;
#endif
#if !defined(CONFIG_MPC832x)
i2c2_clk = csb_clk; /* i2c-2 clk is equal to csb clk */
@@ -444,7 +456,8 @@ int get_clocks(void)
return -13;
}
-#if defined(CONFIG_MPC8360) || defined(CONFIG_MPC832x)
+#if defined(CONFIG_MPC8309) || defined(CONFIG_MPC8360) \
+ || defined(CONFIG_MPC832x)
qepmf = (im->clk.spmr & SPMR_CEPMF) >> SPMR_CEPMF_SHIFT;
qepdf = (im->clk.spmr & SPMR_CEPDF) >> SPMR_CEPDF_SHIFT;
qe_clk = (pci_sync_in * qepmf) / (1 + qepdf);
@@ -457,6 +470,8 @@ int get_clocks(void)
gd->tsec1_clk = tsec1_clk;
gd->tsec2_clk = tsec2_clk;
gd->usbdr_clk = usbdr_clk;
+#elif defined(CONFIG_MPC8309)
+ gd->usbdr_clk = usbdr_clk;
#endif
#if defined(CONFIG_MPC834x)
gd->usbmph_clk = usbmph_clk;
@@ -472,14 +487,17 @@ int get_clocks(void)
#if !defined(CONFIG_MPC832x)
gd->i2c2_clk = i2c2_clk;
#endif
+#if !defined(CONFIG_MPC8309)
gd->enc_clk = enc_clk;
+#endif
gd->lbiu_clk = lbiu_clk;
gd->lclk_clk = lclk_clk;
gd->mem_clk = mem_clk;
#if defined(CONFIG_MPC8360)
gd->mem_sec_clk = mem_sec_clk;
#endif
-#if defined(CONFIG_MPC8360) || defined(CONFIG_MPC832x)
+#if defined(CONFIG_MPC8309) || defined(CONFIG_MPC8360) || \
+ defined(CONFIG_MPC832x)
gd->qe_clk = qe_clk;
gd->brg_clk = brg_clk;
#endif
@@ -523,7 +541,7 @@ int do_clocks (cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[])
printf("Clock configuration:\n");
printf(" Core: %-4s MHz\n", strmhz(buf, gd->core_clk));
printf(" Coherent System Bus: %-4s MHz\n", strmhz(buf, gd->csb_clk));
-#if defined(CONFIG_MPC8360) || defined(CONFIG_MPC832x)
+#if defined(CONFIG_MPC8309) || defined(CONFIG_MPC8360) || defined(CONFIG_MPC832x)
printf(" QE: %-4s MHz\n", strmhz(buf, gd->qe_clk));
printf(" BRG: %-4s MHz\n", strmhz(buf, gd->brg_clk));
#endif
@@ -533,7 +551,9 @@ int do_clocks (cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[])
#if defined(CONFIG_MPC8360)
printf(" DDR Secondary: %-4s MHz\n", strmhz(buf, gd->mem_sec_clk));
#endif
+#if !defined(CONFIG_MPC8309)
printf(" SEC: %-4s MHz\n", strmhz(buf, gd->enc_clk));
+#endif
printf(" I2C1: %-4s MHz\n", strmhz(buf, gd->i2c1_clk));
#if !defined(CONFIG_MPC832x)
printf(" I2C2: %-4s MHz\n", strmhz(buf, gd->i2c2_clk));
@@ -549,6 +569,8 @@ int do_clocks (cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[])
printf(" TSEC1: %-4s MHz\n", strmhz(buf, gd->tsec1_clk));
printf(" TSEC2: %-4s MHz\n", strmhz(buf, gd->tsec2_clk));
printf(" USB DR: %-4s MHz\n", strmhz(buf, gd->usbdr_clk));
+#elif defined(CONFIG_MPC8309)
+ printf(" USB DR: %-4s MHz\n", strmhz(buf, gd->usbdr_clk));
#endif
#if defined(CONFIG_MPC834x)
printf(" USB MPH: %-4s MHz\n", strmhz(buf, gd->usbmph_clk));
diff --git a/arch/powerpc/include/asm/global_data.h b/arch/powerpc/include/asm/global_data.h
index 01f1d4a..5424160 100644
--- a/arch/powerpc/include/asm/global_data.h
+++ b/arch/powerpc/include/asm/global_data.h
@@ -65,6 +65,8 @@ typedef struct global_data {
u32 tsec1_clk;
u32 tsec2_clk;
u32 usbdr_clk;
+#elif defined(CONFIG_MPC8309)
+ u32 usbdr_clk;
#endif
#if defined (CONFIG_MPC834x)
u32 usbmph_clk;
diff --git a/arch/powerpc/include/asm/immap_83xx.h b/arch/powerpc/include/asm/immap_83xx.h
index 2ba502a..c03b693 100644
--- a/arch/powerpc/include/asm/immap_83xx.h
+++ b/arch/powerpc/include/asm/immap_83xx.h
@@ -73,12 +73,19 @@ typedef struct sysconf83xx {
u32 obir; /* Output Buffer Impedance Register */
u8 res8[0xC];
u32 pecr1; /* PCI Express control register 1 */
-#ifdef CONFIG_MPC8308
- u32 sdhccr; /* eSDHC Control Registers for MPC8308 */
+#if defined(CONFIG_MPC8308) || defined(CONFIG_MPC8309)
+ u32 sdhccr; /* eSDHC Control Registers for MPC830x */
#else
u32 pecr2; /* PCI Express control register 2 */
#endif
+#if defined(CONFIG_MPC8309)
+ u32 can_dbg_ctrl;
+ u32 res9a;
+ u32 gpr1;
+ u8 res9b[0xAC];
+#else
u8 res9[0xB8];
+#endif
} sysconf83xx_t;
/*
@@ -708,7 +715,11 @@ typedef struct serdes83xx {
* On Chip ROM
*/
typedef struct rom83xx {
+#if defined(CONFIG_MPC8309)
+ u8 mem[0x8000];
+#else
u8 mem[0x10000];
+#endif
} rom83xx_t;
/*
@@ -972,6 +983,56 @@ typedef struct immap {
u8 res8[0xC0000];
u8 qe[0x100000]; /* QE block */
} immap_t;
+#elif defined(CONFIG_MPC8309)
+typedef struct immap {
+ sysconf83xx_t sysconf; /* System configuration */
+ wdt83xx_t wdt; /* Watch Dog Timer (WDT) Registers */
+ rtclk83xx_t rtc; /* Real Time Clock Module Registers */
+ rtclk83xx_t pit; /* Periodic Interval Timer */
+ gtm83xx_t gtm[2]; /* Global Timers Module */
+ ipic83xx_t ipic; /* Integrated Programmable Interrupt Controller */
+ arbiter83xx_t arbiter; /* System Arbiter Registers */
+ reset83xx_t reset; /* Reset Module */
+ clk83xx_t clk; /* System Clock Module */
+ pmc83xx_t pmc; /* Power Management Control Module */
+ gpio83xx_t gpio[2]; /* General purpose I/O module */
+ u8 res0[0x500]; /* res0 1.25 KBytes added for 8309 */
+ qepi83xx_t qepi; /* QE Ports Interrupts Registers */
+ qepio83xx_t qepio; /* QE Parallel I/O ports */
+ u8 res1[0x800];
+ ddr83xx_t ddr; /* DDR Memory Controller Memory */
+ fsl_i2c_t i2c[2]; /* I2C Controllers */
+ u8 res2[0x1300];
+ duart83xx_t duart[2]; /* DUART */
+ u8 res3[0x200];
+ duart83xx_t duart1[2]; /* DUART */
+ u8 res4[0x500];
+ fsl_lbc_t im_lbc; /* Local Bus Controller Regs */
+ u8 res5[0x1000];
+ u8 spi[0x100];
+ u8 res6[0xf00];
+ dma83xx_t dma; /* DMA */
+ pciconf83xx_t pci_conf[1]; /* PCI Configuration Registers */
+ u8 res7[0x80];
+ ios83xx_t ios; /* Sequencer (IOS) */
+ pcictrl83xx_t pci_ctrl[1]; /* PCI Control & Status Registers */
+ u8 res8[0x13A00];
+ u8 can1[0x1000]; /* Flexcan 1 */
+ u8 can2[0x1000]; /* Flexcan 2 */
+ u8 res9[0x5000];
+ usb83xx_t usb;
+ u8 res10[0x5000];
+ u8 can3[0x1000]; /* Flexcan 3 */
+ u8 can4[0x1000]; /* Flexcan 4 */
+ u8 res11[0x1000];
+ u8 dma1[0x2000]; /* DMA */
+ sdhc83xx_t sdhc; /* SDHC Controller */
+ u8 res12[0xC1000];
+ rom83xx_t rom; /* On Chip ROM */
+ u8 res13[0x8000];
+ u8 qe[0x100000]; /* QE block */
+ u8 res14[0xE00000];/* Added for 8309 */
+} immap_t;
#endif
#define CONFIG_SYS_MPC83xx_DDR_OFFSET (0x2000)
diff --git a/arch/powerpc/include/asm/immap_qe.h b/arch/powerpc/include/asm/immap_qe.h
index 9be9dca..f0b989a 100644
--- a/arch/powerpc/include/asm/immap_qe.h
+++ b/arch/powerpc/include/asm/immap_qe.h
@@ -20,7 +20,7 @@
#define QE_MURAM_SIZE 0xc000UL
#define MAX_QE_RISC 2
#define QE_NUM_OF_SNUM 28
-#elif defined(CONFIG_MPC832x)
+#elif defined(CONFIG_MPC832x) || defined(CONFIG_MPC8309)
#define QE_MURAM_SIZE 0x4000UL
#define MAX_QE_RISC 1
#define QE_NUM_OF_SNUM 28
diff --git a/drivers/qe/qe.c b/drivers/qe/qe.c
index 9f71151..345587b 100644
--- a/drivers/qe/qe.c
+++ b/drivers/qe/qe.c
@@ -113,18 +113,21 @@ static void qe_sdma_init(void)
* we just need to know what the SNUMs are for the threads.
*/
static u8 thread_snum[] = {
+/* Evthreads 16-29 are not supported in MPC8309 */
+#if !defined(CONFIG_MPC8309)
0x04, 0x05, 0x0c, 0x0d,
0x14, 0x15, 0x1c, 0x1d,
0x24, 0x25, 0x2c, 0x2d,
- 0x34, 0x35, 0x88, 0x89,
- 0x98, 0x99, 0xa8, 0xa9,
- 0xb8, 0xb9, 0xc8, 0xc9,
- 0xd8, 0xd9, 0xe8, 0xe9,
- 0x08, 0x09, 0x18, 0x19,
- 0x28, 0x29, 0x38, 0x39,
- 0x48, 0x49, 0x58, 0x59,
- 0x68, 0x69, 0x78, 0x79,
- 0x80, 0x81
+ 0x34, 0x35,
+#endif
+ 0x88, 0x89, 0x98, 0x99,
+ 0xa8, 0xa9, 0xb8, 0xb9,
+ 0xc8, 0xc9, 0xd8, 0xd9,
+ 0xe8, 0xe9, 0x08, 0x09,
+ 0x18, 0x19, 0x28, 0x29,
+ 0x38, 0x39, 0x48, 0x49,
+ 0x58, 0x59, 0x68, 0x69,
+ 0x78, 0x79, 0x80, 0x81
};
static void qe_snums_init(void)
diff --git a/include/mpc83xx.h b/include/mpc83xx.h
index a78f1a2..260bf79 100644
--- a/include/mpc83xx.h
+++ b/include/mpc83xx.h
@@ -74,6 +74,7 @@
#define SPR_FAMILY(spridr) ((spridr & 0xFFF00000) >> 20)
#define SPR_8308 0x8100
+#define SPR_8309 0x8110
#define SPR_831X_FAMILY 0x80B
#define SPR_8311 0x80B2
#define SPR_8313 0x80B0
@@ -389,6 +390,86 @@
#define SICRH_TSOBI1_V2P5 (1 << 1)
#define SICRH_TSOBI2_V3P3 (0 << 0)
#define SICRH_TSOBI2_V2P5 (1 << 0)
+
+#elif defined(CONFIG_MPC8309)
+/* SICR_1 */
+#define SICR_1_UART1_UART1S (0 << (30-2))
+#define SICR_1_UART1_UART1RTS (1 << (30-2))
+#define SICR_1_I2C_I2C (0 << (30-4))
+#define SICR_1_I2C_CKSTOP (1 << (30-4))
+#define SICR_1_IRQ_A_IRQ (0 << (30-6))
+#define SICR_1_IRQ_A_MCP (1 << (30-6))
+#define SICR_1_IRQ_B_IRQ (0 << (30-8))
+#define SICR_1_IRQ_B_CKSTOP (1 << (30-8))
+#define SICR_1_GPIO_A_GPIO (0 << (30-10))
+#define SICR_1_GPIO_A_SD (2 << (30-10))
+#define SICR_1_GPIO_A_DDR (3 << (30-10))
+#define SICR_1_GPIO_B_GPIO (0 << (30-12))
+#define SICR_1_GPIO_B_SD (2 << (30-12))
+#define SICR_1_GPIO_B_QE (3 << (30-12))
+#define SICR_1_GPIO_C_GPIO (0 << (30-14))
+#define SICR_1_GPIO_C_CAN (1 << (30-14))
+#define SICR_1_GPIO_C_DDR (2 << (30-14))
+#define SICR_1_GPIO_C_LCS (3 << (30-14))
+#define SICR_1_GPIO_D_GPIO (0 << (30-16))
+#define SICR_1_GPIO_D_CAN (1 << (30-16))
+#define SICR_1_GPIO_D_DDR (2 << (30-16))
+#define SICR_1_GPIO_D_LCS (3 << (30-16))
+#define SICR_1_GPIO_E_GPIO (0 << (30-18))
+#define SICR_1_GPIO_E_CAN (1 << (30-18))
+#define SICR_1_GPIO_E_DDR (2 << (30-18))
+#define SICR_1_GPIO_E_LCS (3 << (30-18))
+#define SICR_1_GPIO_F_GPIO (0 << (30-20))
+#define SICR_1_GPIO_F_CAN (1 << (30-20))
+#define SICR_1_GPIO_F_CK (2 << (30-20))
+#define SICR_1_USB_A_USBDR (0 << (30-22))
+#define SICR_1_USB_A_UART2S (1 << (30-22))
+#define SICR_1_USB_B_USBDR (0 << (30-24))
+#define SICR_1_USB_B_UART2S (1 << (30-24))
+#define SICR_1_USB_B_UART2RTS (2 << (30-24))
+#define SICR_1_USB_C_USBDR (0 << (30-26))
+#define SICR_1_USB_C_QE_EXT (3 << (30-26))
+#define SICR_1_FEC1_FEC1 (0 << (30-28))
+#define SICR_1_FEC1_GTM (1 << (30-28))
+#define SICR_1_FEC1_GPIO (2 << (30-28))
+#define SICR_1_FEC2_FEC2 (0 << (30-30))
+#define SICR_1_FEC2_GTM (1 << (30-30))
+#define SICR_1_FEC2_GPIO (2 << (30-30))
+/* SICR_2 */
+#define SICR_2_FEC3_FEC3 (0 << (30-0))
+#define SICR_2_FEC3_TMR (1 << (30-0))
+#define SICR_2_FEC3_GPIO (2 << (30-0))
+#define SICR_2_HDLC1_A_HDLC1 (0 << (30-2))
+#define SICR_2_HDLC1_A_GPIO (1 << (30-2))
+#define SICR_2_HDLC1_A_TDM1 (2 << (30-2))
+#define SICR_2_ELBC_A_LA (0 << (30-4))
+#define SICR_2_ELBC_B_LCLK (0 << (30-6))
+#define SICR_2_HDLC2_A_HDLC2 (0 << (30-8))
+#define SICR_2_HDLC2_A_GPIO (0 << (30-8))
+#define SICR_2_HDLC2_A_TDM2 (0 << (30-8))
+/* bits 10-11 unused */
+#define SICR_2_USB_D_USBDR (0 << (30-12))
+#define SICR_2_USB_D_GPIO (2 << (30-12))
+#define SICR_2_USB_D_QE_BRG (3 << (30-12))
+#define SICR_2_PCI_PCI (0 << (30-14))
+#define SICR_2_PCI_CPCI_HS (2 << (30-14))
+#define SICR_2_HDLC1_B_HDLC1 (0 << (30-16))
+#define SICR_2_HDLC1_B_GPIO (1 << (30-16))
+#define SICR_2_HDLC1_B_QE_BRG (2 << (30-16))
+#define SICR_2_HDLC1_B_TDM1 (3 << (30-16))
+#define SICR_2_HDLC1_C_HDLC1 (0 << (30-18))
+#define SICR_2_HDLC1_C_GPIO (1 << (30-18))
+#define SICR_2_HDLC1_C_TDM1 (2 << (30-18))
+#define SICR_2_HDLC2_B_HDLC2 (0 << (30-20))
+#define SICR_2_HDLC2_B_GPIO (1 << (30-20))
+#define SICR_2_HDLC2_B_QE_BRG (2 << (30-20))
+#define SICR_2_HDLC2_B_TDM2 (3 << (30-20))
+#define SICR_2_HDLC2_C_HDLC2 (0 << (30-22))
+#define SICR_2_HDLC2_C_GPIO (1 << (30-22))
+#define SICR_2_HDLC2_C_TDM2 (2 << (30-22))
+#define SICR_2_HDLC2_C_QE_BRG (3 << (30-22))
+#define SICR_2_QUIESCE_B (0 << (30-24))
+
#endif
/*
@@ -580,6 +661,63 @@
#define HRCWL_SVCOD_DIV_8 0x10000000
#define HRCWL_SVCOD_DIV_2 0x20000000
#define HRCWL_SVCOD_DIV_1 0x30000000
+#elif defined(CONFIG_MPC8309)
+
+#define HRCWL_CEVCOD 0x000000C0
+#define HRCWL_CEVCOD_SHIFT 6
+/*
+ * According to Errata MPC8309RMAD, Rev. 0.2, 9/2012
+ * these are different than with 8360, 832x
+ */
+#define HRCWL_CE_PLL_VCO_DIV_2 0x00000000
+#define HRCWL_CE_PLL_VCO_DIV_4 0x00000040
+#define HRCWL_CE_PLL_VCO_DIV_8 0x00000080
+
+#define HRCWL_CEPDF 0x00000020
+#define HRCWL_CEPDF_SHIFT 5
+#define HRCWL_CE_PLL_DIV_1X1 0x00000000
+#define HRCWL_CE_PLL_DIV_2X1 0x00000020
+
+#define HRCWL_CEPMF 0x0000001F
+#define HRCWL_CEPMF_SHIFT 0
+#define HRCWL_CE_TO_PLL_1X16_ 0x00000000
+#define HRCWL_CE_TO_PLL_1X2 0x00000002
+#define HRCWL_CE_TO_PLL_1X3 0x00000003
+#define HRCWL_CE_TO_PLL_1X4 0x00000004
+#define HRCWL_CE_TO_PLL_1X5 0x00000005
+#define HRCWL_CE_TO_PLL_1X6 0x00000006
+#define HRCWL_CE_TO_PLL_1X7 0x00000007
+#define HRCWL_CE_TO_PLL_1X8 0x00000008
+#define HRCWL_CE_TO_PLL_1X9 0x00000009
+#define HRCWL_CE_TO_PLL_1X10 0x0000000A
+#define HRCWL_CE_TO_PLL_1X11 0x0000000B
+#define HRCWL_CE_TO_PLL_1X12 0x0000000C
+#define HRCWL_CE_TO_PLL_1X13 0x0000000D
+#define HRCWL_CE_TO_PLL_1X14 0x0000000E
+#define HRCWL_CE_TO_PLL_1X15 0x0000000F
+#define HRCWL_CE_TO_PLL_1X16 0x00000010
+#define HRCWL_CE_TO_PLL_1X17 0x00000011
+#define HRCWL_CE_TO_PLL_1X18 0x00000012
+#define HRCWL_CE_TO_PLL_1X19 0x00000013
+#define HRCWL_CE_TO_PLL_1X20 0x00000014
+#define HRCWL_CE_TO_PLL_1X21 0x00000015
+#define HRCWL_CE_TO_PLL_1X22 0x00000016
+#define HRCWL_CE_TO_PLL_1X23 0x00000017
+#define HRCWL_CE_TO_PLL_1X24 0x00000018
+#define HRCWL_CE_TO_PLL_1X25 0x00000019
+#define HRCWL_CE_TO_PLL_1X26 0x0000001A
+#define HRCWL_CE_TO_PLL_1X27 0x0000001B
+#define HRCWL_CE_TO_PLL_1X28 0x0000001C
+#define HRCWL_CE_TO_PLL_1X29 0x0000001D
+#define HRCWL_CE_TO_PLL_1X30 0x0000001E
+#define HRCWL_CE_TO_PLL_1X31 0x0000001F
+
+#define HRCWL_SVCOD 0x30000000
+#define HRCWL_SVCOD_SHIFT 28
+#define HRCWL_SVCOD_DIV_2 0x00000000
+#define HRCWL_SVCOD_DIV_4 0x10000000
+#define HRCWL_SVCOD_DIV_8 0x20000000
+#define HRCWL_SVCOD_DIV_1 0x30000000
#endif
/*
@@ -940,6 +1078,21 @@
#define SCCR_SATACM_1 0x00000055
#define SCCR_SATACM_2 0x000000aa
#define SCCR_SATACM_3 0x000000ff
+#elif defined(CONFIG_MPC8309)
+/* SCCR bits - MPC8309 specific */
+#define SCCR_SDHCCM 0x0c000000
+#define SCCR_SDHCCM_SHIFT 26
+#define SCCR_SDHCCM_0 0x00000000
+#define SCCR_SDHCCM_1 0x04000000
+#define SCCR_SDHCCM_2 0x08000000
+#define SCCR_SDHCCM_3 0x0c000000
+
+#define SCCR_USBDRCM 0x00c00000
+#define SCCR_USBDRCM_SHIFT 22
+#define SCCR_USBDRCM_0 0x00000000
+#define SCCR_USBDRCM_1 0x00400000
+#define SCCR_USBDRCM_2 0x00800000
+#define SCCR_USBDRCM_3 0x00c00000
#endif
#define SCCR_PCIEXP1CM 0x00300000
@@ -969,7 +1122,8 @@
*/
#define CSCONFIG_EN 0x80000000
#define CSCONFIG_AP 0x00800000
-#if defined(CONFIG_MPC8308) || defined(CONFIG_MPC831x)
+#if defined(CONFIG_MPC8308) || defined(CONFIG_MPC8309) || \
+ defined(CONFIG_MPC831x)
#define CSCONFIG_ODT_RD_NEVER 0x00000000
#define CSCONFIG_ODT_RD_ONLY_CURRENT 0x00100000
#define CSCONFIG_ODT_RD_ONLY_OTHER_CS 0x00200000
--
1.7.10.1
More information about the U-Boot
mailing list