[U-Boot] Please pull u-boot-atmel/master

[Albert ARIBAUD]

Hi Andreas,

On Sat,  1 Sep 2012 16:50:25 +0200, Andreas Bießmann
<andreas.devel at googlemail.com> wrote:

> Dear Albert Aribaud,
> 
> The following changes since commit
> d602b7a6b94628004fdefb7932a24185346b030b:
> 
>   fsl_esdhc: Remove cache snooping for i.MX (2012-09-01 13:50:35
> +0200)
> 
> are available in the git repository at:
> 
>   git://git.denx.de/u-boot-atmel.git master
> 
> for you to fetch changes up to
> cc443d073801c8fd57d74954d61120214b960d61:
> 
>   at91: 9x5: Enable PMECC for 5series ek board. (2012-09-01 16:43:53
> +0200)
> 
> ----------------------------------------------------------------
> Andreas Bießmann (3):
>       at91sam9263ek: fix 'update' script
>       at91sam9263ek: remove unnecessary console_init_f
>       arm:at91-boards: remove console_init_f where unnecessary
> 
> Bo Shen (7):
>       ARM : at91sam9x5 : Remove CONFIG_ARCH_CPU_INIT
>       arm : at91sam9x5 : fix a small bug for NAND
>       Take over the maintainer for sam9g10 and sam9m10g45
>       atmel: at91sam9x5: fix name error for spi
>       spi: atmel: add WDRBT bit to avoid receive overrun
>       arm: sam9g10/sam9m10g45: remove CONFIG_ARCH_CPU_INIT
>       atmel: at91sam9x5: add spi flash boot support
> 
> Wu, Josh (5):
>       at91: atmel_nand: extract HWECC initialization code into one
> function: atmel_hw_nand_init_param(). at91: atmel_nand: remove unused
> variables. at91: atmel_nand: Update driver to support Programmable
> Multibit ECC controller at91: 9x5: change SMC config timing that both
> works for PMECC & non-PMECC. at91: 9x5: Enable PMECC for 5series ek
> board.
> 
> Xu, Hong (1):
>       AT91: Small fix on AT91 USART initialization code
> 
>  MAINTAINERS                                      |    2 +-
>  arch/arm/cpu/arm926ejs/at91/at91sam9x5_devices.c |    4 +-
>  board/BuS/eb_cpux9k2/cpux9k2.c                   |    2 -
>  board/BuS/vl_ma2sc/vl_ma2sc.c                    |    3 -
>  board/atmel/at91sam9261ek/at91sam9261ek.c        |    3 -
>  board/atmel/at91sam9263ek/at91sam9263ek.c        |    3 -
>  board/atmel/at91sam9m10g45ek/at91sam9m10g45ek.c  |    3 -
>  board/atmel/at91sam9rlek/at91sam9rlek.c          |    3 -
>  board/atmel/at91sam9x5ek/at91sam9x5ek.c          |   14 +-
>  board/calao/sbc35_a9g20/sbc35_a9g20.c            |    3 -
>  board/calao/tny_a9260/tny_a9260.c                |    3 -
>  board/eukrea/cpuat91/cpuat91.c                   |    2 -
>  boards.cfg                                       |    1 +
>  doc/README.atmel_pmecc                           |   44 ++
>  drivers/mtd/nand/atmel_nand.c                    |  827
> ++++++++++++++++++++--
> drivers/mtd/nand/atmel_nand_ecc.h                |  113 +++
> drivers/serial/atmel_usart.c                     |   11 +-
> drivers/spi/atmel_spi.c                          |    3 +
> drivers/spi/atmel_spi.h                          |    1 +
> include/configs/at91sam9261ek.h                  |    2 -
> include/configs/at91sam9263ek.h                  |    2 +-
> include/configs/at91sam9m10g45ek.h               |    1 -
> include/configs/at91sam9x5ek.h                   |   29 +-
> include/nand.h                                   |    2 +- 24 files
> changed, 974 insertions(+), 107 deletions(-) create mode 100644
> doc/README.atmel_pmecc
> 

Applied to u-boot-arm/master, thanks!

Amicalement,
-- 
Albert.