[U-Boot] [PATCH 1/6] h2200: Add support for iPAQ h2200
Marek Vasut
marex at denx.de
Thu Sep 20 01:43:53 CEST 2012
Dear Łukasz Dałek,
> On 20.09.2012 01:25, Marek Vasut wrote:
> > Dear Łukasz Dałek,
> >
> >> On 20.09.2012 01:09, Marek Vasut wrote:
> >>> Dear Łukasz Dałek,
> >>>
> >>>> On 20.09.2012 00:56, Marek Vasut wrote:
> >>>>>> That's why I use directive .word 0xea0003fe
> >>>>>
> >>>>> Check some arm instruction quick ref for what 0xea0003fe really is
> >>>>> and if it really is necessary or anything else work just fine as
> >>>>> well.
> >>>>
> >>>> 0xea0003fe is a branch instruction. 0x3fe is an offset (0x3fe<< 2 +
> >>>> 8 = 0x1000)
> >>>> And I will left it. Bootloader checks for 4 bytes which have to be
> >>>> equal 0xfe, 0x03, 0x00, 0xea and for 4 bytes at the offset 0x40 which
> >>>> have to be equal E, C, E, C
> >>>
> >>> It checks the branch instruction? What a piece of crap ... can't you
> >>> replace it as well?
> >>
> >> I can't. I would have to prepare sth like x-loader used in ti omap
> >> processors.
> >
> > What? Why?
>
> h2200 uses companion chip from Samsung.
OneNAND ?
> When device is powered on
> chip loads 16kb of flash into internal SRAM and PXA executes it.
> That program is 1st stage bootloader.
Check OneNAND SPL
> But u-boot for my device has ~180kb. So it's to big for SRAM.
>
> >> And I want to add driver for sdcard and flash and keyboard and lcd would
> >> be nice... So I will left it as it is for now.
> >
> > these drivers are already in uboot
>
> I haven't seen any MediaQ 1178 drivers (LCD).
oh it has separate LCD or it uses PXA LCDIF ?
> Also SD card and FLASH controllers are embedded in companion chip.
ASIC3 ?
> Chip is based on S3C440 (or 410?) processor but needs some tweaks and
> tests.
Uhhh ?
> Łukasz Dałek
Best regards,
Marek Vasut
More information about the U-Boot
mailing list