[U-Boot] [PATCH v2] usb: do explicit unaligned accesses
Marek Vasut
marex at denx.de
Thu Sep 6 04:21:41 CEST 2012
Dear Lucas Stach,
> usb_hub_descriptor has to be packed as it's used for
> communication with the device. Member wHubCharacteristics
> violates the natural alignment rules.
Doesn't apply, can you rebase on u-boot-usb ? I'll apply it then
> Use explicit unaligned access functions for this member.
> Fixes ARMv7 traping while using USB.
>
> v2: fix typo found by Thomas Langer
>
> Signed-off-by: Lucas Stach <dev at lynxeye.de>
> ---
> common/usb_hub.c | 14 +++++++++-----
> drivers/usb/host/ehci-hcd.c | 7 +++++--
> 2 Dateien geändert, 14 Zeilen hinzugefügt(+), 7 Zeilen entfernt(-)
>
> diff --git a/common/usb_hub.c b/common/usb_hub.c
> index 53d939c..e4a1201 100644
> --- a/common/usb_hub.c
> +++ b/common/usb_hub.c
> @@ -43,6 +43,7 @@
> #include <common.h>
> #include <command.h>
> #include <asm/processor.h>
> +#include <asm/unaligned.h>
> #include <linux/ctype.h>
> #include <asm/byteorder.h>
> #include <asm/unaligned.h>
> @@ -269,6 +270,7 @@ static int usb_hub_configure(struct usb_device *dev)
> int i;
> ALLOC_CACHE_ALIGN_BUFFER(unsigned char, buffer, USB_BUFSIZ);
> unsigned char *bitmap;
> + short hubCharacteristics;
> struct usb_hub_descriptor *descriptor;
> struct usb_hub_device *hub;
> #ifdef USB_HUB_DEBUG
> @@ -304,8 +306,9 @@ static int usb_hub_configure(struct usb_device *dev)
> }
> memcpy((unsigned char *)&hub->desc, buffer, descriptor->bLength);
> /* adjust 16bit values */
> - hub->desc.wHubCharacteristics =
> - le16_to_cpu(descriptor->wHubCharacteristics);
> + put_unaligned(le16_to_cpu(get_unaligned(
> + &descriptor->wHubCharacteristics)),
> + &hub->desc.wHubCharacteristics);
> /* set the bitmap */
> bitmap = (unsigned char *)&hub->desc.DeviceRemovable[0];
> /* devices not removable by default */
> @@ -322,7 +325,8 @@ static int usb_hub_configure(struct usb_device *dev)
> dev->maxchild = descriptor->bNbrPorts;
> USB_HUB_PRINTF("%d ports detected\n", dev->maxchild);
>
> - switch (hub->desc.wHubCharacteristics & HUB_CHAR_LPSM) {
> + hubCharacteristics = get_unaligned(&hub->desc.wHubCharacteristics);
> + switch (hubCharacteristics & HUB_CHAR_LPSM) {
> case 0x00:
> USB_HUB_PRINTF("ganged power switching\n");
> break;
> @@ -335,12 +339,12 @@ static int usb_hub_configure(struct usb_device *dev)
> break;
> }
>
> - if (hub->desc.wHubCharacteristics & HUB_CHAR_COMPOUND)
> + if (hubCharacteristics & HUB_CHAR_COMPOUND)
> USB_HUB_PRINTF("part of a compound device\n");
> else
> USB_HUB_PRINTF("standalone hub\n");
>
> - switch (hub->desc.wHubCharacteristics & HUB_CHAR_OCPM) {
> + switch (hubCharacteristics & HUB_CHAR_OCPM) {
> case 0x00:
> USB_HUB_PRINTF("global over-current protection\n");
> break;
> diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
> index bfea192..d90e94d 100644
> --- a/drivers/usb/host/ehci-hcd.c
> +++ b/drivers/usb/host/ehci-hcd.c
> @@ -22,6 +22,7 @@
> */
> #include <common.h>
> #include <asm/byteorder.h>
> +#include <asm/unaligned.h>
> #include <usb.h>
> #include <asm/io.h>
> #include <malloc.h>
> @@ -876,10 +877,12 @@ int usb_lowlevel_init(int index, void **controller)
> debug("Register %x NbrPorts %d\n", reg, descriptor.hub.bNbrPorts);
> /* Port Indicators */
> if (HCS_INDICATOR(reg))
> - descriptor.hub.wHubCharacteristics |= 0x80;
> + put_unaligned(get_unaligned(&descriptor.hub.wHubCharacteristics)
> + | 0x80, &descriptor.hub.wHubCharacteristics);
> /* Port Power Control */
> if (HCS_PPC(reg))
> - descriptor.hub.wHubCharacteristics |= 0x01;
> + put_unaligned(get_unaligned(&descriptor.hub.wHubCharacteristics)
> + | 0x01, &descriptor.hub.wHubCharacteristics);
>
> /* Start the host controller. */
> cmd = ehci_readl(&ehcic[index].hcor->or_usbcmd);
More information about the U-Boot
mailing list