[U-Boot] [PATCH] arm/km: remove unused code

Prafulla Wadaskar prafulla at marvell.com
Mon Sep 3 10:52:15 CEST 2012



> -----Original Message-----
> From: Prafulla Wadaskar
> Sent: 13 August 2012 10:20
> To: 'Holger Brunck'; u-boot at lists.denx.de
> Cc: Valentin Longchamp; Gerlando Falauto
> Subject: RE: [PATCH] arm/km: remove unused code
> 
> 
> 
> > -----Original Message-----
> > From: Holger Brunck [mailto:holger.brunck at keymile.com]
> > Sent: 09 August 2012 17:08
> > To: u-boot at lists.denx.de
> > Cc: Holger Brunck; Prafulla Wadaskar; Valentin Longchamp; Gerlando
> > Falauto
> > Subject: [PATCH] arm/km: remove unused code
> >
> > For some reasons we had an own implementaion of dram_init and
> > dram_init_banksize. This is not needed anymore, use the standard
> > kirkwood functions instead.
> >
> > Signed-off-by: Holger Brunck <holger.brunck at keymile.com>
> > cc: Prafulla Wadaskar <prafulla at marvell.com>
> > cc: Valentin Longchamp <valentin.longchamp at keymile.com>
> > cc: Gerlando Falauto <gerlando.falauto at keymile.com>
> > ---
> >  board/keymile/km_arm/km_arm.c       |   20 --------------------
> >  include/configs/km/keymile-common.h |    1 -
> >  2 files changed, 0 insertions(+), 21 deletions(-)
> >
> > diff --git a/board/keymile/km_arm/km_arm.c
> > b/board/keymile/km_arm/km_arm.c
> > index ac14a2f..2068b00 100644
> > --- a/board/keymile/km_arm/km_arm.c
> > +++ b/board/keymile/km_arm/km_arm.c
> > @@ -332,26 +332,6 @@ void board_spi_release_bus(struct spi_slave
> > *slave)
> >  	kw_gpio_set_value(KM_FLASH_GPIO_PIN, 1);
> >  }
> >
> > -int dram_init(void)
> > -{
> > -	/* dram_init must store complete ramsize in gd->ram_size */
> > -	/* Fix this */
> > -	gd->ram_size = get_ram_size((void *)kw_sdram_bar(0),
> > -				kw_sdram_bs(0));
> > -	return 0;
> > -}
> > -
> > -void dram_init_banksize(void)
> > -{
> > -	int i;
> > -
> > -	for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) {
> > -		gd->bd->bi_dram[i].start = kw_sdram_bar(i);
> > -		gd->bd->bi_dram[i].size = get_ram_size((long
> > *)kw_sdram_bar(i),
> > -						       kw_sdram_bs(i));
> > -	}
> > -}
> > -
> >  #if (defined(CONFIG_KM_PIGGY4_88E6061))
> >
> >  #define	PHY_LED_SEL_REG		0x18
> > diff --git a/include/configs/km/keymile-common.h
> > b/include/configs/km/keymile-common.h
> > index 7ed9958..9983104 100644
> > --- a/include/configs/km/keymile-common.h
> > +++ b/include/configs/km/keymile-common.h
> > @@ -81,7 +81,6 @@
> >
> >  #define CONFIG_LOADS_ECHO
> >  #define CONFIG_SYS_LOADS_BAUD_CHANGE
> > -#define CONFIG_SYS_BOARD_DRAM_INIT	/* Used board specific dram_init
> > */
> >
> >  #define CONFIG_I2C_MULTI_BUS
> >  #define CONFIG_SYS_MAX_I2C_BUS		1
> > --
> 
> Acked-By: Prafulla Wadaskar <prafulla at marvell.com>
> 
> Will pull this patch soon.

Applied to u-boot-marvell.git master branch

Regards...
Prafulla . . .


More information about the U-Boot mailing list