[U-Boot] [PATCH V2 16/21] mx6q_4x_mt41j128.cfg: force ZQ calibration

Troy Kisky troy.kisky at boundarydevices.com
Sat Sep 22 04:39:13 CEST 2012


Signed-off-by: Troy Kisky <troy.kisky at boundarydevices.com>
---
 board/freescale/imx/ddr/mx6q_4x_mt41j128.cfg |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/board/freescale/imx/ddr/mx6q_4x_mt41j128.cfg b/board/freescale/imx/ddr/mx6q_4x_mt41j128.cfg
index 00712c6..60eae86 100644
--- a/board/freescale/imx/ddr/mx6q_4x_mt41j128.cfg
+++ b/board/freescale/imx/ddr/mx6q_4x_mt41j128.cfg
@@ -169,8 +169,8 @@ WRITE_ENTRY1(MMDC_P0 + MMDC_MDSCR, 0x09408030)
 
 /* ZQ calibrate, CS0 */
 WRITE_ENTRY1(MMDC_P0 + MMDC_MDSCR, 0x04008040)
-WRITE_ENTRY1(MMDC_P0 + MMDC_MPZQHWCTRL, 0xA1380003)
-WRITE_ENTRY1(MMDC_P1 + MMDC_MPZQHWCTRL, 0xA1380003)
+WRITE_ENTRY1(MMDC_P0 + MMDC_MPZQHWCTRL, 0xA1390003)
+WRITE_ENTRY1(MMDC_P1 + MMDC_MPZQHWCTRL, 0xA1390003)
 
 /* MDREF,  32KHz refresh, 4 refeshes each */
 WRITE_ENTRY1(MMDC_P0 + MMDC_MDREF, 0x00005800)
-- 
1.7.9.5



More information about the U-Boot mailing list