[U-Boot] [PATCH] mx28evk: Remove fecmxc_mii_postcall()

[Marek Vasut]

Dear Fabio Estevam,

> fecmxc_mii_postcall() is specific to the KSZ9021 PHY on m28evk and
> should not be used on mx28evk, which has LAN8270 instead.
> 
> Signed-off-by: Fabio Estevam <fabio.estevam at freescale.com>

Acked-by: Marek Vasut <marex at denx.de>

This is a fix, so should go into current release.

> ---
>  board/freescale/mx28evk/mx28evk.c |   25 -------------------------
>  1 file changed, 25 deletions(-)
> 
> diff --git a/board/freescale/mx28evk/mx28evk.c
> b/board/freescale/mx28evk/mx28evk.c index d782aea..6e719ff 100644
> --- a/board/freescale/mx28evk/mx28evk.c
> +++ b/board/freescale/mx28evk/mx28evk.c
> @@ -100,19 +100,6 @@ int board_mmc_init(bd_t *bis)
> 
>  #ifdef	CONFIG_CMD_NET
> 
> -#define	MII_OPMODE_STRAP_OVERRIDE	0x16
> -#define	MII_PHY_CTRL1			0x1e
> -#define	MII_PHY_CTRL2			0x1f
> -
> -int fecmxc_mii_postcall(int phy)
> -{
> -	miiphy_write("FEC1", phy, MII_BMCR, 0x9000);
> -	miiphy_write("FEC1", phy, MII_OPMODE_STRAP_OVERRIDE, 0x0202);
> -	if (phy == 3)
> -		miiphy_write("FEC1", 3, MII_PHY_CTRL2, 0x8180);
> -	return 0;
> -}
> -
>  int board_eth_init(bd_t *bis)
>  {
>  	struct mxs_clkctrl_regs *clkctrl_regs =
> @@ -152,24 +139,12 @@ int board_eth_init(bd_t *bis)
>  		return -EINVAL;
>  	}
> 
> -	ret = fecmxc_register_mii_postcall(dev, fecmxc_mii_postcall);
> -	if (ret) {
> -		puts("FEC MXS: Unable to register FEC0 mii postcall\n");
> -		return ret;
> -	}
> -
>  	dev = eth_get_dev_by_name("FEC1");
>  	if (!dev) {
>  		puts("FEC MXS: Unable to get FEC1 device entry\n");
>  		return -EINVAL;
>  	}
> 
> -	ret = fecmxc_register_mii_postcall(dev, fecmxc_mii_postcall);
> -	if (ret) {
> -		puts("FEC MXS: Unable to register FEC1 mii postcall\n");
> -		return ret;
> -	}
> -
>  	return ret;
>  }

Best regards,
Marek Vasut