[U-Boot] [PATCH 2/6] am33xx: Enable UART{1,2,4,5} pin-mux

Matt Porter mporter at ti.com
Thu Sep 27 14:49:06 CEST 2012


On Wed, Sep 26, 2012 at 04:04:15PM -0400, Andrew Bradford wrote:
> If configured to use UART{1,2,4,5}, such as on the Beaglebone RS232
> cape, enable the proper pin-muxing as per the RS232 cape configuration.
> 
> Signed-off-by: Andrew Bradford <andrew at bradfordembedded.com>
> ---
>  arch/arm/cpu/armv7/am33xx/board.c            |   14 +++++++++
>  arch/arm/include/asm/arch-am33xx/sys_proto.h |    6 +++-
>  board/ti/am335x/mux.c                        |   43 ++++++++++++++++++++++++++
>  3 files changed, 62 insertions(+), 1 deletion(-)
> 
> diff --git a/arch/arm/cpu/armv7/am33xx/board.c b/arch/arm/cpu/armv7/am33xx/board.c
> index ecc2671..32d1da4 100644
> --- a/arch/arm/cpu/armv7/am33xx/board.c
> +++ b/arch/arm/cpu/armv7/am33xx/board.c
> @@ -152,7 +152,21 @@ void s_init(void)
>  	/* UART softreset */
>  	u32 regVal;
>  
> +#ifdef CONFIG_SERIAL1
>  	enable_uart0_pin_mux();
> +#endif /* CONFIG_SERIAL1 */
> +#ifdef CONFIG_SERIAL2
> +	enable_uart1_pin_mux();
> +#endif /* CONFIG_SERIAL2 */
> +#ifdef CONFIG_SERIAL3
> +	enable_uart2_pin_mux();
> +#endif /* CONFIG_SERIAL3 */

Same thing here about UART3

> +#ifdef CONFIG_SERIAL5
> +	enable_uart4_pin_mux();
> +#endif /* CONFIG_SERIAL5 */
> +#ifdef CONFIG_SERIAL6
> +	enable_uart5_pin_mux();
> +#endif /* CONFIG_SERIAL6 */
>  
>  	regVal = readl(&uart_base->uartsyscfg);
>  	regVal |= UART_RESET;
> diff --git a/arch/arm/include/asm/arch-am33xx/sys_proto.h b/arch/arm/include/asm/arch-am33xx/sys_proto.h
> index 819ea65..4852127 100644
> --- a/arch/arm/include/asm/arch-am33xx/sys_proto.h
> +++ b/arch/arm/include/asm/arch-am33xx/sys_proto.h
> @@ -53,11 +53,15 @@ void ddr_pll_config(unsigned int ddrpll_M);
>  
>  /*
>   * We have three pin mux functions that must exist.  We must be able to enable
> - * uart0, for initial output and i2c0 to read the main EEPROM.  We then have a
> + * a uart for initial output and i2c0 to read the main EEPROM.  We then have a
>   * main pinmux function that can be overridden to enable all other pinmux that
>   * is required on the board.
>   */
>  void enable_uart0_pin_mux(void);
> +void enable_uart1_pin_mux(void);
> +void enable_uart2_pin_mux(void);
> +void enable_uart4_pin_mux(void);
> +void enable_uart5_pin_mux(void);
>  void enable_i2c0_pin_mux(void);
>  void enable_board_pin_mux(struct am335x_baseboard_id *header);
>  #endif
> diff --git a/board/ti/am335x/mux.c b/board/ti/am335x/mux.c
> index 80becd5..db47d0e 100644
> --- a/board/ti/am335x/mux.c
> +++ b/board/ti/am335x/mux.c
> @@ -259,6 +259,30 @@ static struct module_pin_mux uart0_pin_mux[] = {
>  	{-1},
>  };
>  
> +static struct module_pin_mux uart1_pin_mux[] = {
> +	{OFFSET(uart1_rxd), (MODE(0) | PULLUP_EN | RXACTIVE)},	/* UART1_RXD */
> +	{OFFSET(uart1_txd), (MODE(0) | PULLUDEN)},		/* UART1_TXD */
> +	{-1},
> +};
> +
> +static struct module_pin_mux uart2_pin_mux[] = {
> +	{OFFSET(spi0_sclk), (MODE(1) | PULLUP_EN | RXACTIVE)},	/* UART2_RXD */
> +	{OFFSET(spi0_d0), (MODE(1) | PULLUDEN)},		/* UART2_TXD */
> +	{-1},
> +};
> +
> +static struct module_pin_mux uart4_pin_mux[] = {
> +	{OFFSET(gpmc_wait0), (MODE(6) | PULLUP_EN | RXACTIVE)},	/* UART4_RXD */
> +	{OFFSET(gpmc_wpn), (MODE(6) | PULLUDEN)},		/* UART4_TXD */
> +	{-1},
> +};
> +
> +static struct module_pin_mux uart5_pin_mux[] = {
> +	{OFFSET(lcd_data9), (MODE(4) | PULLUP_EN | RXACTIVE)},	/* UART5_RXD */
> +	{OFFSET(lcd_data8), (MODE(4) | PULLUDEN)},		/* UART5_TXD */
> +	{-1},
> +};
> +
>  static struct module_pin_mux mmc0_pin_mux[] = {
>  	{OFFSET(mmc0_dat3), (MODE(0) | RXACTIVE | PULLUP_EN)},	/* MMC0_DAT3 */
>  	{OFFSET(mmc0_dat2), (MODE(0) | RXACTIVE | PULLUP_EN)},	/* MMC0_DAT2 */
> @@ -381,6 +405,25 @@ void enable_uart0_pin_mux(void)
>  	configure_module_pin_mux(uart0_pin_mux);
>  }
>  
> +void enable_uart1_pin_mux(void)
> +{
> +	configure_module_pin_mux(uart1_pin_mux);
> +}
> +
> +void enable_uart2_pin_mux(void)
> +{
> +	configure_module_pin_mux(uart2_pin_mux);
> +}
> +
> +void enable_uart4_pin_mux(void)
> +{
> +	configure_module_pin_mux(uart4_pin_mux);
> +}
> +
> +void enable_uart5_pin_mux(void)
> +{
> +	configure_module_pin_mux(uart5_pin_mux);
> +}
>  
>  void enable_i2c0_pin_mux(void)
>  {
> -- 
> 1.7.10
> 
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> http://lists.denx.de/mailman/listinfo/u-boot


More information about the U-Boot mailing list