[U-Boot] [PATCH 6/9] Tegra30: Add Cardhu board files

[Stephen Warren]

On 09/12/2012 04:10 PM, Tom Warren wrote:

> diff --git a/board/nvidia/cardhu/cardhu.c b/board/nvidia/cardhu/cardhu.c

> +/*
> + * Routine: gpio_config_uart
> + * Description: Does nothing on Cardhu - no conflict w/SPI.
> + */
> +void gpio_config_uart(void)
> +{
> +}

For reference, personally, I'd expect to see the UART pinmux set up
there (at least after Lucas's cleanup of GPIO/UART/pinmux functions patch).

> +#ifdef CONFIG_TEGRA_MMC
> +/*
> + * Routine: pin_mux_mmc
> + * Description: setup the pin muxes/tristate values for the SDMMC(s)
> + */
> +static void pin_mux_mmc(void)
> +{
> +	funcmux_select(PERIPH_ID_SDMMC4, FUNCMUX_SDMMC4_ATB_GMA_GME_8_BIT);
> +	funcmux_select(PERIPH_ID_SDMMC3, FUNCMUX_SDMMC3_SDB_4BIT);
...
> +#ifdef CONFIG_USB_EHCI_TEGRA
> +void pin_mux_usb(void)
> +{
> +	/* For USB's GPIO PD0. For now, since we have no pinmux in fdt */
> +	pinmux_tristate_disable(PINGRP_SLXK);
> +}
> +#endif

None of that would compile if the options were enabled. I'd definitely
suggest removing since it needs to be completely re-written anyway.
Otherwise, someone else isn't going to know and it'll seem like
reference code.

> diff --git a/board/nvidia/cardhu/pinmux-config-common.h b/board/nvidia/cardhu/pinmux-config-common.h

I don't think anything in this file is actually used?