[U-Boot] [PATCH v2 10/11] Add u-boot-ubl.bin target to the Makefile

Tom Rini trini at ti.com
Mon Sep 17 16:45:56 CEST 2012


On Mon, Sep 17, 2012 at 10:24:34AM +0100, Jos?? Miguel Gon??alves wrote:
> On 09/17/2012 10:10 AM, Christian Riesch wrote:
> >On Mon, Sep 17, 2012 at 10:30 AM, Jos?? Miguel Gon??alves
> ><jose.goncalves at inov.pt> wrote:
> >>On 09/17/2012 07:47 AM, Christian Riesch wrote:
> >>>Hi,
> >>>
> >>>On Sun, Sep 16, 2012 at 11:27 AM, Jos?? Miguel Gon??alves
> >>><jose.goncalves at inov.pt> wrote:
> >>>>On 09/14/2012 08:08 PM, Tom Rini wrote:
> >>>>>On Fri, Sep 14, 2012 at 06:29:01PM +0100, Jos?? Miguel Gon??alves wrote:
> >>>>>
> >>>>>>Samsung's S3C24XX SoCs need this in order to generate a binary image
> >>>>>>with the SPL and U-Boot concatenated.
> >>>>>>
> >>>>>>Signed-off-by: Jos?? Miguel Gon??alves <jose.goncalves at inov.pt>
> >>>>>>---
> >>>>>>Changes for v2:
> >>>>>>      - None
> >>>>>>---
> >>>>>>    Makefile |    7 ++++---
> >>>>>>    1 file changed, 4 insertions(+), 3 deletions(-)
> >>>>>>
> >>>>>>diff --git a/Makefile b/Makefile
> >>>>>>index 058fb53..595b5f6 100644
> >>>>>>--- a/Makefile
> >>>>>>+++ b/Makefile
> >>>>>>@@ -442,13 +442,14 @@ $(obj)u-boot.sha1:        $(obj)u-boot.bin
> >>>>>>    $(obj)u-boot.dis:     $(obj)u-boot
> >>>>>>                  $(OBJDUMP) -d $< > $@
> >>>>>>    -$(obj)u-boot.ubl:       $(obj)spl/u-boot-spl.bin $(obj)u-boot.bin
> >>>>>>+$(obj)u-boot-ubl.bin:       $(obj)spl/u-boot-spl.bin $(obj)u-boot.bin
> >>>>>>                  $(OBJCOPY) ${OBJCFLAGS} --pad-to=$(PAD_TO) -O binary
> >>>>>>$(obj)spl/u-boot-spl $(obj)spl/u-boot-spl-pad.bin
> >>>>>>                  cat $(obj)spl/u-boot-spl-pad.bin $(obj)u-boot.bin >
> >>>>>>$(obj)u-boot-ubl.bin
> >>>>>>+               rm $(obj)spl/u-boot-spl-pad.bin
> >>>>>>+
> >>>>>>+$(obj)u-boot.ubl:       $(obj)u-boot-ubl.bin
> >>>>>>                  $(obj)tools/mkimage -n $(UBL_CONFIG) -T ublimage \
> >>>>>>                  -e $(CONFIG_SYS_TEXT_BASE) -d $(obj)u-boot-ubl.bin
> >>>>>>$(obj)u-boot.ubl
> >>>>>>-               rm $(obj)u-boot-ubl.bin
> >>>>>>-               rm $(obj)spl/u-boot-spl-pad.bin
> >>>>>>      $(obj)u-boot.ais:       $(obj)spl/u-boot-spl.bin $(obj)u-boot.bin
> >>>>>>                  $(obj)tools/mkimage -s -n $(if
> >>>>>>$(CONFIG_AIS_CONFIG_FILE),$(CONFIG_AIS_CONFIG_FILE),"/dev/null") \
> >>>>>This diff is hard to read, but what exactly are you changing?  The
> >>>>>u-boot-ubl target is also used on TI platforms.  It looks like you're
> >>>>>making it such that u-boot-ubl.bin produces the old binary and
> >>>>>u-boot-ubl adds a new target which is the mkimage header on top of the
> >>>>>same bits as before, but without possibly padding the output image.  I
> >>>>>suspect in your case you could just set PAD_TO to 8192 in
> >>>>>board/../config.mk and use the existing target.
> >>>>>
> >>>>In the S3C2416 I don't need the mkimage stuff. I only need the raw SPL
> >>>>image
> >>>>padded at 8KB concatenated with the standard U-Boot. What I've done was
> >>>>to
> >>>>split the existing u-boot-ubl target in two; u-boot-ubl.bin, that I use
> >>>>to
> >>>>program the Flash, and u-boot-ubl that remains with the same
> >>>>functionality
> >>>>as before, just now it depends on u-boot-ubl.bin.
> >>>I think you should drop the UBL names from your padding target
> >>>(u-boot-ubl.bin) since this is TI specific, use something more
> >>>generic.
> >>
> >>I only reused a temporary filename used for the u-boot-ubl target and make
> >>it a new target.
> >>If you think this is not an adequate name, can you suggest a new one?
> >u-boot.pad? u-boot-pad.bin?
> >
> 
> If no one else has anything against, I will change the name of the
> new target to u-boot-pad.bin

I think I'm OK with that.

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20120917/3ef6c3cc/attachment.pgp>


More information about the U-Boot mailing list