[U-Boot] [PATCH v4 1/2] Loop block device for sandbox
Marek Vasut
marex at denx.de
Fri Sep 7 11:26:48 CEST 2012
Dear Pavel Herrmann,
> On Friday 07 of September 2012 01:29:55 Marek Vasut wrote:
> > Dear Pavel Herrmann,
> >
> > > This driver uses files as block devices, can be used for testing disk
> > > operations on sandbox.
> > > A new command "sata_loop" is introduced to load files in runtime.
> >
> > WARNING: externs should be avoided in .c files
> > #141: FILE: drivers/block/sata_loopback.c:39:
> > +extern block_dev_desc_t sata_dev_desc[];
> >
> > total: 0 errors, 1 warnings, 231 lines checked
> >
> > NOTE: Ignored message types: COMPLEX_MACRO CONSIDER_KSTRTO MINMAX
> > MULTISTATEMENT_MACRO_USE_DO_WHILE
>
> Yes, i know about that, and chose to ignore it.
Sorry, this is not how it works.
> i will not create a header file for a single line that checkpatch doesnt
> like (with just a warning), especially when other drivers have such a line
> in them as well.
So, implement proper accessor for this list? Or export the structure through
some sata-related header? How does other do it?
> > > Signed-off-by: Pavel Herrmann <morpheus.ibis at gmail.com>
> > > CC: Marek Vasut <marex at denx.de>
> > > CC: Mike Frysinger <vapier at gentoo.org>
> > > ---
> > >
> > > Changes for v4:
> > > checkpatch fixes
> > > use NULLs instead of ""
> > > extend sata_loop command
> > >
> > > Changes for v3:
> > > introduce sata_loop command
> > >
> > > Changes for v2:
> > > split sandbox config off into separate patch (2/2)
> > > rename file to signify exported API
> > > style fixes
> > > show end of long filenames rather than beginning
> > > check for lseek errors to indicate non-regular file
> > >
> > > drivers/block/Makefile | 1 +
> > > drivers/block/sata_loopback.c | 212
> > >
> > > ++++++++++++++++++++++++++++++++++++++++++ include/configs/sandbox.h
> > > |
> > >
> > > 8 ++
> > >
> > > 3 files changed, 221 insertions(+)
> > > create mode 100644 drivers/block/sata_loopback.c
> > >
> > > diff --git a/drivers/block/Makefile b/drivers/block/Makefile
> > > index f1ebdcc..c95651a 100644
> > > --- a/drivers/block/Makefile
> > > +++ b/drivers/block/Makefile
> > > @@ -40,6 +40,7 @@ COBJS-$(CONFIG_SATA_SIL) += sata_sil.o
> > >
> > > COBJS-$(CONFIG_IDE_SIL680) += sil680.o
> > > COBJS-$(CONFIG_SCSI_SYM53C8XX) += sym53c8xx.o
> > > COBJS-$(CONFIG_SYSTEMACE) += systemace.o
> > >
> > > +COBJS-${CONFIG_SATA_LOOP} += sata_loopback.o
> > >
> > > COBJS := $(COBJS-y)
> > > SRCS := $(COBJS:.o=.c)
> > >
> > > diff --git a/drivers/block/sata_loopback.c
> > > b/drivers/block/sata_loopback.c new file mode 100644
> > > index 0000000..600fbdc
> > > --- /dev/null
> > > +++ b/drivers/block/sata_loopback.c
> > > @@ -0,0 +1,212 @@
> > > +/*
> > > + * (C) Copyright 2012
> > > + * Pavel Herrmann <morpheus.ibis at gmail.com>
> > > + *
> > > + * See file CREDITS for list of people who contributed to this
> > > + * project.
> > > + *
> > > + * This program is free software; you can redistribute it and/or
> > > + * modify it under the terms of the GNU General Public License as
> > > + * published by the Free Software Foundation; either version 2 of
> > > + * the License, or (at your option) any later version.
> > > + *
> > > + * This program is distributed in the hope that it will be useful,
> > > + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> > > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> > > + * GNU General Public License for more details.
> > > + *
> > > + * You should have received a copy of the GNU General Public License
> > > + * along with this program; if not, write to the Free Software
> > > + * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
> > > + * MA 02111-1307 USA
> > > + */
> > > +
> > > +#include <common.h>
> > > +#include <part.h>
> > > +#include <ata.h>
> > > +#include <libata.h>
> > > +#include <errno.h>
> > > +#include <os.h>
> > > +#include <command.h>
> > > +#include <malloc.h>
> > > +
> > > +static const char revision[] = "0.0";
> > > +static const char vendor[] = "SATA loopback";
> > > +
> > > +/* this will be auto-initialized to NULLs */
> > > +static char *filenames[CONFIG_SYS_SATA_MAX_DEVICE];
> > > +
> > > +extern block_dev_desc_t sata_dev_desc[];
> > > +
> > > +static inline int range_check(int dev)
> > > +{
> > > + return (dev < 0) || (dev >= CONFIG_SYS_SATA_MAX_DEVICE);
> > > +}
> > > +
> > > +int init_sata(int dev)
> > > +{
> > > + block_dev_desc_t *pdev = &sata_dev_desc[dev];
> > > + int fd, old_fd;
> > > +
> > > + if (range_check(dev)) {
> > > + printf("File index %d is out of range.\n", dev);
> > > + return -EINVAL;
> > > + }
> > > +
> > > + if (filenames[dev])
> > > + fd = os_open(filenames[dev], OS_O_RDWR);
> > > + else
> > > + fd = -1;
> > > +
> > > + old_fd = (long) pdev->priv;
> > > + /* This is ugly, but saves allocation for 1 int. */
> > > + pdev->priv = (void *) (long) fd;
> > > +
> > > + if ((old_fd > 2) || (old_fd < 0))
> > > + os_close(old_fd);
> > > +
> > > + return 0;
> > > +}
> > > +
> > > +lbaint_t sata_read(int dev, lbaint_t start, lbaint_t blkcnt, void
> > > *buffer)
> > > +{
> > > + block_dev_desc_t *pdev = &sata_dev_desc[dev];
> > > + int fd = (long) pdev->priv;
> > > + lbaint_t start_byte = ATA_SECT_SIZE * start;
> > > + lbaint_t length_byte = ATA_SECT_SIZE * blkcnt;
> > > + lbaint_t retval;
> > > +
> > > + if (os_lseek(fd, start_byte, OS_SEEK_SET) != start_byte)
> > > + return -1;
> > > +
> > > + retval = os_read(fd, buffer, length_byte);
> > > +
> > > + return retval / ATA_SECT_SIZE;
> > > +}
> > > +
> > > +lbaint_t sata_write(int dev, lbaint_t start, lbaint_t blkcnt, void
> > > *buffer) +{
> > > + block_dev_desc_t *pdev = &sata_dev_desc[dev];
> > > + int fd = (long) pdev->priv;
> > > + lbaint_t start_byte = ATA_SECT_SIZE * start;
> > > + lbaint_t length_byte = ATA_SECT_SIZE * blkcnt;
> > > + lbaint_t retval;
> > > +
> > > + if (os_lseek(fd, start_byte, OS_SEEK_SET) != start_byte)
> > > + return -1;
> > > +
> > > + retval = os_write(fd, buffer, length_byte);
> > > +
> > > + return retval / ATA_SECT_SIZE;
> > > +}
> > > +
> > > +int scan_sata(int dev)
> > > +{
> > > + block_dev_desc_t *pdev = &sata_dev_desc[dev];
> > > + int fd = (long) pdev->priv;
> > > + int namelen;
> > > + char *filename;
> > > + lbaint_t bytes = 0;
> > > +
> > > + if (range_check(dev)) {
> > > + printf("File index %d is out of range.\n", dev);
> > > + return -EINVAL;
> > > + }
> > > +
> > > + if (filenames[dev])
> > > + filename = filenames[dev];
> > > + else
> > > + filename = "";
> > > +
> > > + memcpy(pdev->vendor, vendor, sizeof(vendor));
> > > + memcpy(pdev->revision, revision, sizeof(revision));
> > > + namelen = strlen(filename);
> > > +
> > > + if (namelen > 20) {
> > > + /* take the last 17 chars, prepend them with "..." */
> > > + memcpy(pdev->product, "...", 3);
> > > + memcpy(pdev->product+3, filename + (namelen - 17), 17);
> > > + } else
> > > + memcpy(pdev->product, filename, namelen);
> > > +
> > > + pdev->product[20] = 0;
> > > +
> > > + bytes = os_lseek(fd, 0, OS_SEEK_END);
> > > + if (bytes != -1) {
> > > + pdev->type = DEV_TYPE_HARDDISK;
> > > + pdev->blksz = ATA_SECT_SIZE;
> > > + pdev->lun = 0;
> > > + pdev->lba = bytes/ATA_SECT_SIZE;
> > > + printf("SATA loop %d:\nfilename: %s\nsize: %lu\nblock count:"
> > > + " %lu\n", dev, filename, bytes, pdev->lba);
> > > + } else {
> > > + pdev->type = DEV_TYPE_HARDDISK;
> > > + pdev->blksz = ATA_SECT_SIZE;
> > > + pdev->lun = 0;
> > > + pdev->lba = 0;
> > > + printf("SATA loop %d:\nfilename: %s\nFAILED TO OPEN\n",
> > > + dev, filename);
> > > + }
> > > +
> > > + return 0;
> > > +}
> > > +
> > > +
> > > +int do_loop(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
> > > +{
> > > + int dev = 0;
> > > +
> > > + switch (argc) {
> > > + case 0:
> > > + case 1:
> > > + return CMD_RET_USAGE;
> > > + case 2:
> > > + if (!strncmp(argv[1], "inf", 3)) {
> > > + for (dev = 0; dev < CONFIG_SYS_SATA_MAX_DEVICE; dev++)
> > > + scan_sata(dev);
> > > + return 0;
> > > + }
> > > + return CMD_RET_USAGE;
> > > + case 3:
> > > + if (!strncmp(argv[1], "inf", 3)) {
> > > + dev = simple_strtoul(argv[2], NULL, 10);
> > > + return scan_sata(dev);
> > > + }
> > > + return CMD_RET_USAGE;
> > > + case 4:
> > > + if (!strncmp(argv[1], "load", 4)) {
> > > + dev = simple_strtoul(argv[2], NULL, 10);
> > > + /*
> > > + * init_sata() and scan_sata() do their own range
> > > + * check, however we need to explicitly do it here
> > > + * as well.
> > > + */
> > > + if (range_check(dev)) {
> > > + printf("File index %d is out of range.\n", dev);
> > > + return -EINVAL;
> > > + }
> > > + free(filenames[dev]);
> > > + filenames[dev] = strdup(argv[3]);
> > > + init_sata(dev);
> > > + scan_sata(dev);
> > > + /*
> > > + * Scan the partition table if we succeeded in loading
> > > + * the new loop file.
> > > + */
> > > + if (sata_dev_desc[dev].lba > 0)
> > > + init_part(&sata_dev_desc[dev]);
> > > +
> > > + return 0;
> > > + }
> > > + return CMD_RET_USAGE;
> > > + }
> > > + return CMD_RET_USAGE;
> > > +}
> > > +
> > > +U_BOOT_CMD(
> > > + sata_loop, 4, 1, do_loop,
> > > + "SATA loopback",
> > > + "info - show info about all loop devices\n"
> > > + "sata_loop info devnum - show info about loop devnum\n"
> > > + "sata_loop load devnum file - load file from host FS into loop
> > > devnum" +);
> > > diff --git a/include/configs/sandbox.h b/include/configs/sandbox.h
> > > index 0220386..a713430 100644
> > > --- a/include/configs/sandbox.h
> > > +++ b/include/configs/sandbox.h
> > > @@ -93,4 +93,12 @@
> > >
> > > "stdout=serial\0" \
> > > "stderr=serial\0"
> > >
> > > +/* SATA loopback device */
> > > +#define CONFIG_CMD_SATA
> > > +#define CONFIG_SATA_LOOP
> > > +#define CONFIG_SYS_SATA_MAX_DEVICE 2
> > > +#define CONFIG_DOS_PARTITION
> > > +#define CONFIG_CMD_FAT
> > > +#define CONFIG_CMD_EXT2
> > > +
> > >
> > > #endif
More information about the U-Boot
mailing list