[U-Boot] booting failed ( NAND read from offset 3c0000 failed -74 )

Manoj.J manu.tele at gmail.com
Fri Sep 7 12:21:02 CEST 2012


Hi All,

I have used latest U-boot and am using that on DM355, when i boot my board
i get this on putty.

[ NAND read from offset 3c0000 failed -74
 *** Warning - readenv() failed, using default environment ]

Can anyone help on this   up and how to over come it. ? Thank you


boot log of latest u-boot ( 2012.07)

==========================================================================

Booting Catalog Boot Loader
BootMode = NAND
Starting NAND Copy...
Valid magicnum, 0xA1ACED66, found in block 0x00000019.
ðåð4ðåðåðåð   DONE
Jumping to entry point at 0x81080000.


U-Boot 2012.07 (Sep 05 2012 - 15:37:40)

I2C:   ready
DRAM:  64 MiB
WARNING: Caches not enabled
NAND:  256 MiB
MMC:   davinci: 0, davinci: 1
NAND read from offset 3c0000 failed -74
*** Warning - readenv() failed, using default environment

Net:   dm9000
Hit any key to stop autoboot:  0
DM355 EVM #

==========================================================================

Previous  u-boot ( which boot properly)
Booting Catalog Boot Loader
BootMode = NAND
Starting NAND Copy...
Valid magicnum, 0xA1ACED66, found in block 0x00000019.
   DONE
   Jumping to entry point at 0x81080000.


   U-Boot 2010.06 (Aug 17 2010 - 14:56:30)

   Cores: ARM 216 MHz
   DDR:   133 MHz
   I2C:   ready
   DRAM:  128 MiB
   NAND:  128 MiB
   Bad block table found at page 65472, version 0x01
   Bad block table found at page 65408, version 0x01
   *** Warning - bad CRC or NAND, using default environment

   Net:   dm9000
   Hit any key to stop autoboot:  0




-- 
*Regards*
*Manoj.J*


More information about the U-Boot mailing list