[U-Boot] [PATCH] at91sam9x5: set default EBI I/O drive configuration.

[Andreas Bießmann]

Dear Josh Wu,

On 06.09.2012 10:14, Josh Wu wrote:
> This patch configure at91sam9x5's EBI drive I/O. Without this, When SD card boot, the nand flash read/write are not stable. Which will cause kernel MTD test fail (Since mainline kernel doesn't configure the EBI register).
> 
> Signed-off-by: Josh Wu <josh.wu at atmel.com>
> ---

applied to u-boot-atmel/master, thanks!

Best regards

Andreas Bießmann