[U-Boot] [PATCH 09/71] serial: mpc8xx: Move serial registration from serial_initialize()
Marek Vasut
marex at denx.de
Mon Sep 17 01:20:34 CEST 2012
Move the registration of serial_smc and serial_scc ports from
default serial_initialize() into CPU specific function called from
serial_initialize(). This slims down the serial_initialize() call
to a bare tracker of all possible serial port registration routines
in U-Boot.
The exports of both serial_scc_device and serial_smc_device can
not yet be removed as they are still used in default_serial_console()
calls.
Signed-off-by: Marek Vasut <marex at denx.de>
Cc: Marek Vasut <marek.vasut at gmail.com>
Cc: Tom Rini <trini at ti.com>
Cc: Anatolij Gustschin <agust at denx.de>
Cc: Stefan Roese <sr at denx.de>
Cc: Mike Frysinger <vapier at gentoo.org>
---
arch/powerpc/cpu/mpc8xx/serial.c | 11 +++++++++++
common/serial.c | 11 +++--------
2 files changed, 14 insertions(+), 8 deletions(-)
diff --git a/arch/powerpc/cpu/mpc8xx/serial.c b/arch/powerpc/cpu/mpc8xx/serial.c
index dc9b323..00888e9 100644
--- a/arch/powerpc/cpu/mpc8xx/serial.c
+++ b/arch/powerpc/cpu/mpc8xx/serial.c
@@ -681,6 +681,17 @@ __weak struct serial_device *default_serial_console(void)
#endif
}
+void mpc8xx_serial_initialize(void)
+{
+#if defined(CONFIG_8xx_CONS_SMC1) || defined(CONFIG_8xx_CONS_SMC2)
+ serial_register(&serial_smc_device);
+#endif
+#if defined(CONFIG_8xx_CONS_SCC1) || defined(CONFIG_8xx_CONS_SCC2) || \
+ defined(CONFIG_8xx_CONS_SCC3) || defined(CONFIG_8xx_CONS_SCC4)
+ serial_register(&serial_scc_device);
+#endif
+}
+
#ifdef CONFIG_MODEM_SUPPORT
void disable_putc(void)
{
diff --git a/common/serial.c b/common/serial.c
index 84dbe50..0187dac 100644
--- a/common/serial.c
+++ b/common/serial.c
@@ -40,6 +40,8 @@ static void serial_null(void)
void name(void) \
__attribute__((weak, alias("serial_null")));
+serial_initfunc(mpc8xx_serial_initialize);
+
void serial_register(struct serial_device *dev)
{
#ifdef CONFIG_NEEDS_MANUAL_RELOC
@@ -57,14 +59,7 @@ void serial_register(struct serial_device *dev)
void serial_initialize(void)
{
-#if defined(CONFIG_8xx_CONS_SMC1) || defined(CONFIG_8xx_CONS_SMC2)
- serial_register(&serial_smc_device);
-#endif
-#if defined(CONFIG_8xx_CONS_SCC1) || defined(CONFIG_8xx_CONS_SCC2) || \
- defined(CONFIG_8xx_CONS_SCC3) || defined(CONFIG_8xx_CONS_SCC4)
- serial_register(&serial_scc_device);
-#endif
-
+ mpc8xx_serial_initialize();
#if defined(CONFIG_SYS_NS16550_SERIAL)
#if defined(CONFIG_SYS_NS16550_COM1)
serial_register(&eserial1_device);
--
1.7.10.4
More information about the U-Boot
mailing list