[U-Boot] [PATCH 39/70] serial: arm: Implement CONFIG_SERIAL_MULTI into altera_jtag serial driver

[Marek Vasut]

Implement support for CONFIG_SERIAL_MULTI into altera_jtag serial driver.
This driver was so far only usable directly, but this patch also adds
support for the multi method. This allows using more than one serial
driver alongside the altera_jtag driver. Also, add a weak implementation
of default_serial_console() returning this driver.

Signed-off-by: Marek Vasut <marex at denx.de>
Cc: Marek Vasut <marek.vasut at gmail.com>
Cc: Tom Rini <trini at ti.com>
Cc: Thomas Chou <thomas at wytron.com.tw>
---
 common/serial.c                   |    2 ++
 drivers/serial/altera_jtag_uart.c |   71 +++++++++++++++++++++++++++++++++----
 2 files changed, 67 insertions(+), 6 deletions(-)

diff --git a/common/serial.c b/common/serial.c
index 2d6ba05..24879ec 100644
--- a/common/serial.c
+++ b/common/serial.c
@@ -69,6 +69,7 @@ serial_initfunc(evb64260_serial_initialize);
 serial_initfunc(ml2_serial_initialize);
 serial_initfunc(sconsole_serial_initialize);
 serial_initfunc(p3mx_serial_initialize);
+serial_initfunc(altera_jtag_serial_initialize);
 
 void serial_register(struct serial_device *dev)
 {
@@ -116,6 +117,7 @@ void serial_initialize(void)
 	ml2_serial_initialize();
 	sconsole_serial_initialize();
 	p3mx_serial_initialize();
+	altera_jtag_serial_initialize();
 
 	serial_assign(default_serial_console()->name);
 }
diff --git a/drivers/serial/altera_jtag_uart.c b/drivers/serial/altera_jtag_uart.c
index 2980e4d..d3b6c1c 100644
--- a/drivers/serial/altera_jtag_uart.c
+++ b/drivers/serial/altera_jtag_uart.c
@@ -33,10 +33,16 @@ DECLARE_GLOBAL_DATA_PTR;
  *-----------------------------------------------------------------*/
 static nios_jtag_t *jtag = (nios_jtag_t *)CONFIG_SYS_NIOS_CONSOLE;
 
-void serial_setbrg( void ){ return; }
-int serial_init( void ) { return(0);}
+static void altera_jtag_serial_setbrg(void)
+{
+}
+
+static int altera_jtag_serial_init(void)
+{
+	return 0;
+}
 
-void serial_putc (char c)
+static void altera_jtag_serial_putc(char c)
 {
 	while (1) {
 		unsigned st = readl(&jtag->control);
@@ -51,18 +57,18 @@ void serial_putc (char c)
 	writel ((unsigned char)c, &jtag->data);
 }
 
-void serial_puts (const char *s)
+static void altera_jtag_serial_puts(const char *s)
 {
 	while (*s != 0)
 		serial_putc (*s++);
 }
 
-int serial_tstc (void)
+static int altera_jtag_serial_tstc(void)
 {
 	return ( readl (&jtag->control) & NIOS_JTAG_RRDY);
 }
 
-int serial_getc (void)
+static int altera_jtag_serial_getc(void)
 {
 	int c;
 	unsigned val;
@@ -76,3 +82,56 @@ int serial_getc (void)
 	c = val & 0x0ff;
 	return (c);
 }
+
+#ifdef CONFIG_SERIAL_MULTI
+static struct serial_device altera_jtag_serial_drv = {
+	.name	= "altera_jtag_serial",
+	.start	= altera_jtag_serial_init,
+	.stop	= NULL,
+	.setbrg	= altera_jtag_serial_setbrg,
+	.putc	= altera_jtag_serial_putc,
+	.puts	= altera_jtag_serial_puts,
+	.getc	= altera_jtag_serial_getc,
+	.tstc	= altera_jtag_serial_tstc,
+};
+
+void altera_jtag_serial_initialize(void)
+{
+	serial_register(&altera_jtag_serial_drv);
+}
+
+__weak struct serial_device *default_serial_console(void)
+{
+	return &altera_jtag_serial_drv;
+}
+#else
+int serial_init(void)
+{
+	return altera_jtag_serial_init();
+}
+
+void serial_setbrg(void)
+{
+	altera_jtag_serial_setbrg();
+}
+
+void serial_putc(const char c)
+{
+	altera_jtag_serial_putc(c);
+}
+
+void serial_puts(const char *s)
+{
+	altera_jtag_serial_puts(s);
+}
+
+int serial_getc(void)
+{
+	return altera_jtag_serial_getc();
+}
+
+int serial_tstc(void)
+{
+	return altera_jtag_serial_tstc();
+}
+#endif
-- 
1.7.10.4