[U-Boot] [PATCH 2/2] mx6: Add basic support for mx6qsabresd board.

[Vikram Narayanan]

On 9/12/2012 12:02 AM, Fabio Estevam wrote:
> mx6qsabresd is a board based on mx6q SoC with the following features:
> - 1GB of DDR3
> - 1 USB OTG port
> - 1 HDMI output port
> - SPI NOR
> - LVDS panel
> - Gigabit Ethernet
> - Camera Connector
> - eMMC and SD card slot
> - Audio
>
> Add very basic support for it.
>
> Signed-off-by: Fabio Estevam<fabio.estevam at freescale.com>
<snip>
> +/* allow to overwrite serial and ethaddr */
> +#define CONFIG_ENV_OVERWRITE
> +#define CONFIG_CONS_INDEX              1
> +#define CONFIG_BAUDRATE                        115200
> +#define CONFIG_SYS_BAUDRATE_TABLE      {9600, 19200, 38400, 57600, 115200}

According to this commit,
"CONFIG_SYS_BAUDRATE_TABLE: Add <config_fallbacks.h>, place there"
(26750c8aee2383a026e0cf89e9310628d3a5a6a0), the above line isn't 
required anymore. Right?

Regards,
Vikram