[U-Boot] [PATCH 54/71] serial: arm: Implement CONFIG_SERIAL_MULTI into lpc2292 serial driver

[Marek Vasut]

Implement support for CONFIG_SERIAL_MULTI into lpc2292 serial driver.
This driver was so far only usable directly, but this patch also adds
support for the multi method. This allows using more than one serial
driver alongside the lpc2292 driver. Also, add a weak implementation
of default_serial_console() returning this driver.

Signed-off-by: Marek Vasut <marex at denx.de>
Cc: Marek Vasut <marek.vasut at gmail.com>
Cc: Tom Rini <trini at ti.com>
---
 common/serial.c                 |    2 ++
 drivers/serial/serial_lpc2292.c |   66 ++++++++++++++++++++++++++++++++++-----
 2 files changed, 61 insertions(+), 7 deletions(-)

diff --git a/common/serial.c b/common/serial.c
index 59a8650..23c8d22 100644
--- a/common/serial.c
+++ b/common/serial.c
@@ -84,6 +84,7 @@ serial_initfunc(imx_serial_initialize);
 serial_initfunc(ixp_serial_initialize);
 serial_initfunc(ks8695_serial_initialize);
 serial_initfunc(lh7a40x_serial_initialize);
+serial_initfunc(lpc2292_serial_initialize);
 
 void serial_register(struct serial_device *dev)
 {
@@ -146,6 +147,7 @@ void serial_initialize(void)
 	ixp_serial_initialize();
 	ks8695_serial_initialize();
 	lh7a40x_serial_initialize();
+	lpc2292_serial_initialize();
 
 	serial_assign(default_serial_console()->name);
 }
diff --git a/drivers/serial/serial_lpc2292.c b/drivers/serial/serial_lpc2292.c
index e3a60b6..2601ee7 100644
--- a/drivers/serial/serial_lpc2292.c
+++ b/drivers/serial/serial_lpc2292.c
@@ -33,7 +33,7 @@
 
 DECLARE_GLOBAL_DATA_PTR;
 
-void serial_setbrg (void)
+static void lpc2292_serial_setbrg(void)
 {
 	unsigned short divisor = 0;
 
@@ -57,7 +57,7 @@ void serial_setbrg (void)
 	PUT8(U0FCR, 1);		/* Enable RX and TX FIFOs */
 }
 
-int serial_init (void)
+static int lpc2292_serial_init(void)
 {
 	unsigned long pinsel0;
 
@@ -71,7 +71,7 @@ int serial_init (void)
 	return (0);
 }
 
-void serial_putc (const char c)
+static void lpc2292_serial_putc(const char c)
 {
 	if (c == '\n')
 	{
@@ -83,14 +83,13 @@ void serial_putc (const char c)
 	PUT8(U0THR, c);
 }
 
-int serial_getc (void)
+static int lpc2292_serial_getc(void)
 {
 	while((GET8(U0LSR) & 1) == 0);
 	return GET8(U0RBR);
 }
 
-void
-serial_puts (const char *s)
+static void lpc2292_serial_puts(const char *s)
 {
 	while (*s) {
 		serial_putc (*s++);
@@ -98,7 +97,60 @@ serial_puts (const char *s)
 }
 
 /* Test if there is a byte to read */
-int serial_tstc (void)
+static int lpc2292_serial_tstc(void)
 {
 	return (GET8(U0LSR) & 1);
 }
+
+#ifdef CONFIG_SERIAL_MULTI
+static struct serial_device lpc2292_serial_drv = {
+	.name	= "lpc2292_serial",
+	.start	= lpc2292_serial_init,
+	.stop	= NULL,
+	.setbrg	= lpc2292_serial_setbrg,
+	.putc	= lpc2292_serial_putc,
+	.puts	= lpc2292_serial_puts,
+	.getc	= lpc2292_serial_getc,
+	.tstc	= lpc2292_serial_tstc,
+};
+
+void lpc2292_serial_initialize(void)
+{
+	serial_register(&lpc2292_serial_drv);
+}
+
+__weak struct serial_device *default_serial_console(void)
+{
+	return &lpc2292_serial_drv;
+}
+#else
+int serial_init(void)
+{
+	return lpc2292_serial_init();
+}
+
+void serial_setbrg(void)
+{
+	lpc2292_serial_setbrg();
+}
+
+void serial_putc(const char c)
+{
+	lpc2292_serial_putc(c);
+}
+
+void serial_puts(const char *s)
+{
+	lpc2292_serial_puts(s);
+}
+
+int serial_getc(void)
+{
+	return lpc2292_serial_getc();
+}
+
+int serial_tstc(void)
+{
+	return lpc2292_serial_tstc();
+}
+#endif
-- 
1.7.10.4