[U-Boot] =?true?q?=5BPULL=7D=20please=20pull=20u-boot-atmel/master=20into=20u-boot-arm/master?=

Mon Sep 17 19:07:36 CEST 2012

Dear Albert Aribaud,

as mentioned before there are some fixes left for this upcoming release, here
they are.

The following changes since commit 057df193b40d31799d41d43bc832a972f658bfe4:

  Merge remote-tracking branch 'u-boot-ti/master' into m (2012-09-05 20:20:04 +0200)

are available in the git repository at:

  git://git.denx.de/u-boot-atmel.git master

for you to fetch changes up to dc3e30bab7c5ef87bd24ebcbb7cdfc3fb2b44555:

  Atmel: sam9g10/9m10/9x5: Add support to boot DT kernel (2012-09-17 19:02:44 +0200)

----------------------------------------------------------------
Bo Shen (3):
      spi: add atmel at25df321 serial flash support
      spiflash: at25: using common spi flash operation
      Atmel: sam9g10/9m10/9x5: Add support to boot DT kernel

Wu, Josh (2):
      at91sam9x5: set default EBI I/O drive configuration.
      atmel_nand: fix the U-Boot output information about nand flash with PMECC enable.

 board/atmel/at91sam9x5ek/at91sam9x5ek.c |    4 ++++
 drivers/mtd/nand/atmel_nand.c           |    5 +++--
 drivers/mtd/spi/atmel.c                 |   17 ++++++++++++++++-
 include/configs/at91sam9261ek.h         |    2 ++
 include/configs/at91sam9m10g45ek.h      |    2 ++
 include/configs/at91sam9x5ek.h          |    2 ++
 6 files changed, 29 insertions(+), 3 deletions(-)

Best regards

Andreas BieÃŸmann