[U-Boot] [PATCH v4 11/11] S3C24XX: Add support to MINI2416 board

[José Miguel Gonçalves]

On 09/19/2012 08:18 PM, Tom Rini wrote:
> On Wed, Sep 19, 2012 at 12:25:27PM +0100, Jos?? Miguel Gon??alves wrote:
>> The MINI2416 board is based on a Samsung's S3C2416 SoC and has 64MB DDR2 SDRAM,
>> 256MB NAND Flash, a LAN9220 Ethernet Controller and a WM8731 Audio CODEC.
>> This U-Boot port was implemented and tested on a unit bought to Boardcon
>> (http://www.armdesigner.com/) but there are some other chinese providers
>> that can supply it with a selectable NAND chip from 128MB to 1GB.
>>
>> Signed-off-by: Jos?? Miguel Gon??alves <jose.goncalves at inov.pt>
>> ---
>> Changes for v2:
>>     - Coding style cleanup
> There's still at least one #define[tab]NAME in the code, please
> checkpatch.pl the whole series.

I've done that!
I only get the warnings/errors that are justified on the cover letter 
(in the v3 changes), i.e., one were I followed a pre-existent coding style:

$ tools/checkpatch.pl 
../0002-S3C24XX-Add-core-support-for-Samsung-s-S3C24XX-SoCs.patch
WARNING: please, no spaces at the start of a line
#1719: FILE: include/common.h:631:
+    defined(CONFIG_S3C24XX) || \$

total: 0 errors, 1 warnings, 1587 lines checked

and another that is a false positive in the Ethernet address 
definitionin the config file;

$ tools/checkpatch.pl ../0011-S3C24XX-Add-support-to-MINI2416-board.patch
ERROR: spaces required around that ':' (ctx:VxV)
#694: FILE: include/configs/mini2416.h:165:
+#define CONFIG_ETHADDR            FE:11:22:33:44:55
                                         ^

ERROR: spaces required around that ':' (ctx:VxV)
#694: FILE: include/configs/mini2416.h:165:
+#define CONFIG_ETHADDR            FE:11:22:33:44:55
                                            ^

ERROR: spaces required around that ':' (ctx:VxV)
#694: FILE: include/configs/mini2416.h:165:
+#define CONFIG_ETHADDR            FE:11:22:33:44:55
                                               ^

ERROR: spaces required around that ':' (ctx:VxV)
#694: FILE: include/configs/mini2416.h:165:
+#define CONFIG_ETHADDR            FE:11:22:33:44:55
                                                  ^

total: 4 errors, 0 warnings, 639 lines checked


>
>> +#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
> This is in the defaults now, please remove.
>

OK.

Best regards,
José Gonçalves