[U-Boot] [PATCH 02/16] pmic:i2c: Add I2C byte order to PMIC framework
Lukasz Majewski
l.majewski at samsung.com
Fri Sep 14 17:40:01 CEST 2012
Since the pmic_reg_read is the u32 value, the order in which bytes
are placed to form u32 value is important.
This commit adds the reverse (which is default) and normal byte order.
Signed-off-by: Lukasz Majewski <l.majewski at samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park at samsung.com>
---
drivers/misc/pmic_i2c.c | 31 ++++++++++++++++++++++++-------
include/pmic.h | 3 +++
2 files changed, 27 insertions(+), 7 deletions(-)
diff --git a/drivers/misc/pmic_i2c.c b/drivers/misc/pmic_i2c.c
index e74c372..1aa5b7b 100644
--- a/drivers/misc/pmic_i2c.c
+++ b/drivers/misc/pmic_i2c.c
@@ -40,13 +40,24 @@ int pmic_reg_write(struct pmic *p, u32 reg, u32 val)
switch (pmic_i2c_tx_num) {
case 3:
- buf[0] = (val >> 16) & 0xff;
- buf[1] = (val >> 8) & 0xff;
- buf[2] = val & 0xff;
+ if (pmic_i2c_byte_order == PMIC_BYTE_ORDER_NORMAL) {
+ buf[2] = (val >> 16) & 0xff;
+ buf[1] = (val >> 8) & 0xff;
+ buf[0] = val & 0xff;
+ } else {
+ buf[0] = (val >> 16) & 0xff;
+ buf[1] = (val >> 8) & 0xff;
+ buf[2] = val & 0xff;
+ }
break;
case 2:
- buf[0] = (val >> 8) & 0xff;
- buf[1] = val & 0xff;
+ if (pmic_i2c_byte_order == PMIC_BYTE_ORDER_NORMAL) {
+ buf[1] = (val >> 8) & 0xff;
+ buf[0] = val & 0xff;
+ } else {
+ buf[0] = (val >> 8) & 0xff;
+ buf[1] = val & 0xff;
+ }
break;
case 1:
buf[0] = val & 0xff;
@@ -75,10 +86,16 @@ int pmic_reg_read(struct pmic *p, u32 reg, u32 *val)
switch (pmic_i2c_tx_num) {
case 3:
- ret_val = buf[0] << 16 | buf[1] << 8 | buf[2];
+ if (pmic_i2c_byte_order == PMIC_BYTE_ORDER_NORMAL)
+ ret_val = buf[2] << 16 | buf[1] << 8 | buf[0];
+ else
+ ret_val = buf[0] << 16 | buf[1] << 8 | buf[2];
break;
case 2:
- ret_val = buf[0] << 8 | buf[1];
+ if (pmic_i2c_byte_order == PMIC_BYTE_ORDER_NORMAL)
+ ret_val = buf[1] << 8 | buf[0];
+ else
+ ret_val = buf[0] << 8 | buf[1];
break;
case 1:
ret_val = buf[0];
diff --git a/include/pmic.h b/include/pmic.h
index 6a05b40..2166f73 100644
--- a/include/pmic.h
+++ b/include/pmic.h
@@ -27,11 +27,13 @@
enum { PMIC_I2C, PMIC_SPI, };
enum { I2C_PMIC, I2C_NUM, };
enum { PMIC_READ, PMIC_WRITE, };
+enum { PMIC_BYTE_ORDER_REVERSED, PMIC_BYTE_ORDER_NORMAL, };
struct p_i2c {
unsigned char addr;
unsigned char *buf;
unsigned char tx_num;
+ unsigned char byte_order;
};
struct p_spi {
@@ -65,6 +67,7 @@ int pmic_set_output(struct pmic *p, u32 reg, int ldo, int on);
#define pmic_i2c_addr (p->hw.i2c.addr)
#define pmic_i2c_tx_num (p->hw.i2c.tx_num)
+#define pmic_i2c_byte_order (p->hw.i2c.byte_order)
#define pmic_spi_bitlen (p->hw.spi.bitlen)
#define pmic_spi_flags (p->hw.spi.flags)
--
1.7.2.3
More information about the U-Boot
mailing list