[U-Boot] [PATCH] km/arm: set SPI NOR Flash default parameters

[Prafulla Wadaskar]

> -----Original Message-----
> From: Prafulla Wadaskar
> Sent: 16 August 2012 09:46
> To: 'Valentin Longchamp'
> Cc: u-boot at lists.denx.de; Holger Brunck
> Subject: RE: [PATCH] km/arm: set SPI NOR Flash default parameters
> 
> 
> 
> > -----Original Message-----
> > From: Valentin Longchamp [mailto:valentin.longchamp at keymile.com]
> > Sent: 15 August 2012 20:46
> > To: Prafulla Wadaskar
> > Cc: u-boot at lists.denx.de; Holger Brunck
> > Subject: Re: [PATCH] km/arm: set SPI NOR Flash default parameters
> >
> > Hi Prafulla,
> >
> > On 08/14/2012 03:17 PM, Prafulla Wadaskar wrote:
> > >
> > >
> > >> -----Original Message-----
> > >> From: Valentin Longchamp [mailto:valentin.longchamp at keymile.com]
> > >> Sent: 14 August 2012 17:09
> > >> To: Prafulla Wadaskar
> > >> Cc: u-boot at lists.denx.de; Valentin Longchamp; Holger Brunck
> > >> Subject: [PATCH] km/arm: set SPI NOR Flash default parameters
> > >>
> > >> These parameters are used by the the sf probe command that are
> used
> > by
> > >> our update script and they therefore need to be set for all of
> our
> > >> boards.
> > >>
> > >> The timing is the same as for the ENV SPI NOR Flash (since it's
> the
> > >> same physical device) and takes the boco2 delay on the bus into
> > >
> > > What is boco2? Is it typo mistake?
> >
> > No typo mistake. It's the name of a chip developped at Keymile that
> is
> > the the
> > SPI bus as well.
> 
> Thanks for clarification.
> 
> Acked-by: Prafulla Wadaskar <Prafulla at marvell.com>
> Will pull this patch soon.

Applied to u-boot-marvell.git master branch

Regards...
Prafulla . . .