[U-Boot] [PATCH 7/7] mx25: Fix eSDHC support

[Benoît Thébaudeau]

The MMC driver appropriate for the i.MX25 is fsl_esdhc, which has nothing to do
with mxcmmc.

Also, each eSDHC instance has a dedicated clock, so gd->sdhc_clk must be set
accordingly. This is good for the case only a single SDHC instance is used
(initialization made with fsl_esdhc_mmc_init()). A future patch will fix the
multi-instance use case (initialization made directly with
fsl_esdhc_initialize()).

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau at advansee.com>
Cc: Stefano Babic <sbabic at denx.de>
Cc: Eric Bénard <eric at eukrea.com>
Cc: Otavio Salvador <otavio at ossystems.com.br>
---
 .../arch/arm/cpu/arm926ejs/mx25/generic.c          |   19 ++++++++++---------
 1 file changed, 10 insertions(+), 9 deletions(-)

diff --git u-boot-imx-e1eb75b.orig/arch/arm/cpu/arm926ejs/mx25/generic.c u-boot-imx-e1eb75b/arch/arm/cpu/arm926ejs/mx25/generic.c
index 6374248..af81b33 100644
--- u-boot-imx-e1eb75b.orig/arch/arm/cpu/arm926ejs/mx25/generic.c
+++ u-boot-imx-e1eb75b/arch/arm/cpu/arm926ejs/mx25/generic.c
@@ -29,11 +29,10 @@
 #include <asm/arch/imx-regs.h>
 #include <asm/arch/imx25-pinmux.h>
 #include <asm/arch/clock.h>
-#ifdef CONFIG_MXC_MMC
-#include <asm/arch/mxcmmc.h>
-#endif
 
 #ifdef CONFIG_FSL_ESDHC
+#include <fsl_esdhc.h>
+
 DECLARE_GLOBAL_DATA_PTR;
 #endif
 
@@ -226,23 +225,25 @@ int cpu_eth_init(bd_t *bis)
 int get_clocks(void)
 {
 #ifdef CONFIG_FSL_ESDHC
-	gd->sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK);
+#if CONFIG_SYS_FSL_ESDHC_ADDR == IMX_MMC_SDHC2_BASE
+	gd->sdhc_clk = mxc_get_clock(MXC_ESDHC2_CLK);
+#else
+	gd->sdhc_clk = mxc_get_clock(MXC_ESDHC1_CLK);
+#endif
 #endif
 	return 0;
 }
 
+#ifdef CONFIG_FSL_ESDHC
 /*
  * Initializes on-chip MMC controllers.
  * to override, implement board_mmc_init()
  */
 int cpu_mmc_init(bd_t *bis)
 {
-#ifdef CONFIG_MXC_MMC
-	return mxc_mmc_init(bis);
-#else
-	return 0;
-#endif
+	return fsl_esdhc_mmc_init(bis);
 }
+#endif
 
 #ifdef CONFIG_MXC_UART
 void mx25_uart1_init_pins(void)