[U-Boot] [PATCH v4 1/2] Loop block device for sandbox
Marek Vasut
marex at denx.de
Fri Sep 7 01:29:55 CEST 2012
Dear Pavel Herrmann,
> This driver uses files as block devices, can be used for testing disk
> operations on sandbox.
> A new command "sata_loop" is introduced to load files in runtime.
WARNING: externs should be avoided in .c files
#141: FILE: drivers/block/sata_loopback.c:39:
+extern block_dev_desc_t sata_dev_desc[];
total: 0 errors, 1 warnings, 231 lines checked
NOTE: Ignored message types: COMPLEX_MACRO CONSIDER_KSTRTO MINMAX
MULTISTATEMENT_MACRO_USE_DO_WHILE
> Signed-off-by: Pavel Herrmann <morpheus.ibis at gmail.com>
> CC: Marek Vasut <marex at denx.de>
> CC: Mike Frysinger <vapier at gentoo.org>
> ---
> Changes for v4:
> checkpatch fixes
> use NULLs instead of ""
> extend sata_loop command
>
> Changes for v3:
> introduce sata_loop command
>
> Changes for v2:
> split sandbox config off into separate patch (2/2)
> rename file to signify exported API
> style fixes
> show end of long filenames rather than beginning
> check for lseek errors to indicate non-regular file
>
> drivers/block/Makefile | 1 +
> drivers/block/sata_loopback.c | 212
> ++++++++++++++++++++++++++++++++++++++++++ include/configs/sandbox.h |
> 8 ++
> 3 files changed, 221 insertions(+)
> create mode 100644 drivers/block/sata_loopback.c
>
> diff --git a/drivers/block/Makefile b/drivers/block/Makefile
> index f1ebdcc..c95651a 100644
> --- a/drivers/block/Makefile
> +++ b/drivers/block/Makefile
> @@ -40,6 +40,7 @@ COBJS-$(CONFIG_SATA_SIL) += sata_sil.o
> COBJS-$(CONFIG_IDE_SIL680) += sil680.o
> COBJS-$(CONFIG_SCSI_SYM53C8XX) += sym53c8xx.o
> COBJS-$(CONFIG_SYSTEMACE) += systemace.o
> +COBJS-${CONFIG_SATA_LOOP} += sata_loopback.o
>
> COBJS := $(COBJS-y)
> SRCS := $(COBJS:.o=.c)
> diff --git a/drivers/block/sata_loopback.c b/drivers/block/sata_loopback.c
> new file mode 100644
> index 0000000..600fbdc
> --- /dev/null
> +++ b/drivers/block/sata_loopback.c
> @@ -0,0 +1,212 @@
> +/*
> + * (C) Copyright 2012
> + * Pavel Herrmann <morpheus.ibis at gmail.com>
> + *
> + * See file CREDITS for list of people who contributed to this
> + * project.
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of
> + * the License, or (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
> + * MA 02111-1307 USA
> + */
> +
> +#include <common.h>
> +#include <part.h>
> +#include <ata.h>
> +#include <libata.h>
> +#include <errno.h>
> +#include <os.h>
> +#include <command.h>
> +#include <malloc.h>
> +
> +static const char revision[] = "0.0";
> +static const char vendor[] = "SATA loopback";
> +
> +/* this will be auto-initialized to NULLs */
> +static char *filenames[CONFIG_SYS_SATA_MAX_DEVICE];
> +
> +extern block_dev_desc_t sata_dev_desc[];
> +
> +static inline int range_check(int dev)
> +{
> + return (dev < 0) || (dev >= CONFIG_SYS_SATA_MAX_DEVICE);
> +}
> +
> +int init_sata(int dev)
> +{
> + block_dev_desc_t *pdev = &sata_dev_desc[dev];
> + int fd, old_fd;
> +
> + if (range_check(dev)) {
> + printf("File index %d is out of range.\n", dev);
> + return -EINVAL;
> + }
> +
> + if (filenames[dev])
> + fd = os_open(filenames[dev], OS_O_RDWR);
> + else
> + fd = -1;
> +
> + old_fd = (long) pdev->priv;
> + /* This is ugly, but saves allocation for 1 int. */
> + pdev->priv = (void *) (long) fd;
> +
> + if ((old_fd > 2) || (old_fd < 0))
> + os_close(old_fd);
> +
> + return 0;
> +}
> +
> +lbaint_t sata_read(int dev, lbaint_t start, lbaint_t blkcnt, void *buffer)
> +{
> + block_dev_desc_t *pdev = &sata_dev_desc[dev];
> + int fd = (long) pdev->priv;
> + lbaint_t start_byte = ATA_SECT_SIZE * start;
> + lbaint_t length_byte = ATA_SECT_SIZE * blkcnt;
> + lbaint_t retval;
> +
> + if (os_lseek(fd, start_byte, OS_SEEK_SET) != start_byte)
> + return -1;
> +
> + retval = os_read(fd, buffer, length_byte);
> +
> + return retval / ATA_SECT_SIZE;
> +}
> +
> +lbaint_t sata_write(int dev, lbaint_t start, lbaint_t blkcnt, void
> *buffer) +{
> + block_dev_desc_t *pdev = &sata_dev_desc[dev];
> + int fd = (long) pdev->priv;
> + lbaint_t start_byte = ATA_SECT_SIZE * start;
> + lbaint_t length_byte = ATA_SECT_SIZE * blkcnt;
> + lbaint_t retval;
> +
> + if (os_lseek(fd, start_byte, OS_SEEK_SET) != start_byte)
> + return -1;
> +
> + retval = os_write(fd, buffer, length_byte);
> +
> + return retval / ATA_SECT_SIZE;
> +}
> +
> +int scan_sata(int dev)
> +{
> + block_dev_desc_t *pdev = &sata_dev_desc[dev];
> + int fd = (long) pdev->priv;
> + int namelen;
> + char *filename;
> + lbaint_t bytes = 0;
> +
> + if (range_check(dev)) {
> + printf("File index %d is out of range.\n", dev);
> + return -EINVAL;
> + }
> +
> + if (filenames[dev])
> + filename = filenames[dev];
> + else
> + filename = "";
> +
> + memcpy(pdev->vendor, vendor, sizeof(vendor));
> + memcpy(pdev->revision, revision, sizeof(revision));
> + namelen = strlen(filename);
> +
> + if (namelen > 20) {
> + /* take the last 17 chars, prepend them with "..." */
> + memcpy(pdev->product, "...", 3);
> + memcpy(pdev->product+3, filename + (namelen - 17), 17);
> + } else
> + memcpy(pdev->product, filename, namelen);
> +
> + pdev->product[20] = 0;
> +
> + bytes = os_lseek(fd, 0, OS_SEEK_END);
> + if (bytes != -1) {
> + pdev->type = DEV_TYPE_HARDDISK;
> + pdev->blksz = ATA_SECT_SIZE;
> + pdev->lun = 0;
> + pdev->lba = bytes/ATA_SECT_SIZE;
> + printf("SATA loop %d:\nfilename: %s\nsize: %lu\nblock count:"
> + " %lu\n", dev, filename, bytes, pdev->lba);
> + } else {
> + pdev->type = DEV_TYPE_HARDDISK;
> + pdev->blksz = ATA_SECT_SIZE;
> + pdev->lun = 0;
> + pdev->lba = 0;
> + printf("SATA loop %d:\nfilename: %s\nFAILED TO OPEN\n",
> + dev, filename);
> + }
> +
> + return 0;
> +}
> +
> +
> +int do_loop(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
> +{
> + int dev = 0;
> +
> + switch (argc) {
> + case 0:
> + case 1:
> + return CMD_RET_USAGE;
> + case 2:
> + if (!strncmp(argv[1], "inf", 3)) {
> + for (dev = 0; dev < CONFIG_SYS_SATA_MAX_DEVICE; dev++)
> + scan_sata(dev);
> + return 0;
> + }
> + return CMD_RET_USAGE;
> + case 3:
> + if (!strncmp(argv[1], "inf", 3)) {
> + dev = simple_strtoul(argv[2], NULL, 10);
> + return scan_sata(dev);
> + }
> + return CMD_RET_USAGE;
> + case 4:
> + if (!strncmp(argv[1], "load", 4)) {
> + dev = simple_strtoul(argv[2], NULL, 10);
> + /*
> + * init_sata() and scan_sata() do their own range
> + * check, however we need to explicitly do it here
> + * as well.
> + */
> + if (range_check(dev)) {
> + printf("File index %d is out of range.\n", dev);
> + return -EINVAL;
> + }
> + free(filenames[dev]);
> + filenames[dev] = strdup(argv[3]);
> + init_sata(dev);
> + scan_sata(dev);
> + /*
> + * Scan the partition table if we succeeded in loading
> + * the new loop file.
> + */
> + if (sata_dev_desc[dev].lba > 0)
> + init_part(&sata_dev_desc[dev]);
> +
> + return 0;
> + }
> + return CMD_RET_USAGE;
> + }
> + return CMD_RET_USAGE;
> +}
> +
> +U_BOOT_CMD(
> + sata_loop, 4, 1, do_loop,
> + "SATA loopback",
> + "info - show info about all loop devices\n"
> + "sata_loop info devnum - show info about loop devnum\n"
> + "sata_loop load devnum file - load file from host FS into loop devnum"
> +);
> diff --git a/include/configs/sandbox.h b/include/configs/sandbox.h
> index 0220386..a713430 100644
> --- a/include/configs/sandbox.h
> +++ b/include/configs/sandbox.h
> @@ -93,4 +93,12 @@
> "stdout=serial\0" \
> "stderr=serial\0"
>
> +/* SATA loopback device */
> +#define CONFIG_CMD_SATA
> +#define CONFIG_SATA_LOOP
> +#define CONFIG_SYS_SATA_MAX_DEVICE 2
> +#define CONFIG_DOS_PARTITION
> +#define CONFIG_CMD_FAT
> +#define CONFIG_CMD_EXT2
> +
> #endif
More information about the U-Boot
mailing list