[U-Boot] Pull request: u-boot-arm/master
Albert ARIBAUD
albert.u.boot at aribaud.net
Fri Sep 21 23:35:17 CEST 2012
Hello Wolfgang,
The following changes since commit
6e2fbdea1b26d75314d87c380a36b0015bf824cf:
Merge branch 'agust at denx.de' of git://git.denx.de/u-boot-staging
(2012-09-02 00:44:09 +0200)
are available in the git repository at:
git://git.denx.de/u-boot-arm master
for you to fetch changes up to d193c1b6eb05041c94ad9aacd8c94189d1dbc5f8:
Merge remote-tracking branch 'u-boot-imx/master' (2012-09-21 00:26:19
+0200)
----------------------------------------------------------------
Albert ARIBAUD (4):
edminiv2: orion5x: fix GPIO inits and values
Merge remote-tracking branch 'u-boot-atmel/master' into m
Merge remote-tracking branch 'u-boot-ti/master' into m
Merge remote-tracking branch 'u-boot-imx/master'
Arnout Vandecappelle (Essensium/Mind) (1):
OMAP3: add definition of CTRL_WKUP_CTRL register
Ashok Kumar Reddy (2):
ima3-mx53:Rename CONFIG_PRIME => CONFIG_ETHPRME, remove
mx6qsabrelite:Use IMX_GPIO_NR Macro
Benoît Thébaudeau (8):
mx35: Fix decode_pll
mx35: Add definitions for clock gate values
mx35: Fix clock dividers
mx25: Define default SoC input clock frequencies
mx35: Define default SoC input clock frequencies
mx35 timer: Switch to 32-kHz source
Fix mx31_decode_pll
mx31: Define default SoC input clock frequencies
Fabio Estevam (3):
mx28evk: Convert to mxs_adjust_memory_params()
mx28evk: Add USB Ethernet support
mx35pdk: README: Remove NAND references
Holger Brunck (1):
arm/km: remove unused code
Jens Scharsig (2):
eb_cpux9k2: fix chip select
atmel: eb_cpux9k2: add ram target configuration
Jim Lin (1):
tegra: nand: Add Tegra NAND driver
Karl O. Pinc (2):
Cosmetic doc typo fixes to the kwbimage feature docs
cosmetic: Better explain how to use the kirkwood kwbimage.cfg
file.
Linus Walleij (1):
integrator: break out common config
Lucas Stach (1):
tegra20: usb: rework set_host_mode
Marek Vasut (7):
M28: Fix the use of gpmi-nand in mtdparts
MX28: Cleanup mxsboot within make mrproper
MX28: Fixup the ad-hoc use of DIGCTL_MICROSECONDS
SCSPS1: Enable caches
MX28: SPI: Fix the DMA DCache race condition
MX28: SPI: Fix the DMA chaining
MX28: MMC: Avoid DMA DCache race condition
Markus Hubig (2):
arm: Adds board_postclk_init to the init_sequence.
Fixes the crippled console output on PortuxG20.
Matt Sealey (1):
efikamx: refine USB support
Michael Walle (1):
lsxl: support power switch
Otavio Salvador (3):
MX28: mx28evk: Align SSP clock speed
MX28: mx28evk: Enable SPI DMA
mx28evk: extend default environment
Simon Glass (5):
nand: Try to align the default buffers
tegra: Add NAND support to funcmux
tegra: fdt: Add NAND controller binding and definitions
tegra: fdt: Add NAND definitions to fdt
tegra: Enable NAND on Seaboard
Stefano Babic (12):
OMAP3: tam3517: add function to read MAC from EEPROM
OMAP3: twister : get MAC address from EEPROM
OMAP3: mt_ventoux: Correct board pinmux
OMAP3: mt_ventoux: activate GPIO4
OMAP3: mt_ventoux: read MAC address from EEPROM
OMAP3: mt_ventoux: disable the buzzer at start-up
video: drop duplicate set of DISPC_CONFIG register
OMAP3: video: add macros to set display parameters
OMAP3: mt_ventoux: added video support
MX: set a common place to share code for Freescale i.MX
MX35: mx35pdk: add support for MMC
MX6: drop binary constants from iomux header
Stephen Warren (6):
tegra: enable NAND on Harmony
mmc: detect boot sectors using EXT_CSD_BOOT_MULT too
env_mmc: allow environment to be in an eMMC partition
tegra: put eMMC environment into the boot sectors
ARM: tegra: remove redundant mkdirs from board Makefiles
ARM: tegra: fix Ventana standalone build
Thierry Reding (2):
cmd_nand: dump: Align data and OOB buffers
tegra: Enable NAND on TEC
Tom Rini (1):
am33xx: Remove redundant timer config
Tom Warren (2):
Tegra: Change Tegra20 to Tegra in common code, prep for T30
NAND: MXS: include common.h first so cache.h is included in
correct order
Valentin Longchamp (4):
km/arm: set SPI NOR Flash default parameters
kw_spi: fix clock prescaler computation
km/ivm: fix string len check to support 7 char board names
arm/km: fix frequency of the SPI NOR Flash
Makefile | 8 +-
arch/arm/cpu/arm1136/mx31/generic.c | 12 +-
arch/arm/cpu/arm1136/mx31/timer.c | 16 +-
arch/arm/cpu/arm1136/mx35/generic.c | 90 +-
arch/arm/cpu/arm1136/mx35/timer.c | 46 +-
arch/arm/cpu/arm720t/tegra20/cpu.c | 8 +-
arch/arm/cpu/arm926ejs/mx25/generic.c | 2 +-
arch/arm/cpu/arm926ejs/mx25/timer.c | 16 +-
arch/arm/cpu/arm926ejs/mxs/spl_boot.c | 8 +-
arch/arm/cpu/arm926ejs/orion5x/cpu.c | 2 +
arch/arm/cpu/armv7/am33xx/board.c | 20 -
arch/arm/cpu/armv7/tegra20/cmd_enterrcm.c | 2 +-
arch/arm/cpu/armv7/tegra20/usb.c | 37 +-
arch/arm/cpu/tegra20-common/Makefile | 2 +-
arch/arm/cpu/tegra20-common/ap20.c | 6 +-
arch/arm/cpu/tegra20-common/board.c | 14 +-
arch/arm/cpu/tegra20-common/funcmux.c | 7 +
arch/arm/cpu/tegra20-common/warmboot.c | 14 +-
arch/arm/cpu/tegra20-common/warmboot_avp.c | 2 +-
arch/arm/dts/tegra20.dtsi | 7 +
arch/arm/{cpu/armv7 => }/imx-common/Makefile | 4 +-
arch/arm/{cpu/armv7 => }/imx-common/cmd_bmode.c | 0
arch/arm/{cpu/armv7 => }/imx-common/cpu.c | 0
.../imx-common/i2c.c => imx-common/i2c-mxv7.c} | 0
arch/arm/{cpu/armv7 => }/imx-common/iomux-v3.c | 0
arch/arm/{cpu/armv7 => }/imx-common/speed.c | 0
arch/arm/{cpu/armv7 => }/imx-common/timer.c | 0
arch/arm/include/asm/arch-kirkwood/spi.h | 1 +
arch/arm/include/asm/arch-mx25/clock.h | 14 +
arch/arm/include/asm/arch-mx31/clock.h | 14 +
arch/arm/include/asm/arch-mx35/clock.h | 14 +
arch/arm/include/asm/arch-mx35/crm_regs.h | 48 +-
arch/arm/include/asm/arch-mx6/iomux.h | 124 +--
arch/arm/include/asm/arch-omap3/dss.h | 11 +-
arch/arm/include/asm/arch-omap3/mux.h | 5 +
arch/arm/include/asm/arch-tegra20/ap20.h | 3 -
arch/arm/include/asm/arch-tegra20/funcmux.h | 3 +
arch/arm/include/asm/arch-tegra20/mmc.h | 8 +-
arch/arm/include/asm/arch-tegra20/sys_proto.h | 4 +-
arch/arm/include/asm/arch-tegra20/tegra20.h | 13 +-
.../arm/include/asm/arch-tegra20}/tegra_mmc.h | 12 +-
arch/arm/include/asm/arch-tegra20/tegra_spi.h | 2 +-
arch/arm/include/asm/arch-tegra20/timer.h | 4 +-
arch/arm/lib/board.c | 3 +
board/BuS/eb_cpux9k2/cpux9k2.c | 6 +-
board/Marvell/sheevaplug/kwbimage.cfg | 4 +-
board/avionic-design/common/tamonten.c | 2 +-
board/avionic-design/dts/tegra20-tec.dts | 11 +
board/buffalo/lsxl/lsxl.c | 22 +-
board/compal/paz00/paz00.c | 4 +-
board/compulab/trimslice/trimslice.c | 4 +-
board/freescale/mx28evk/iomux.c | 2 +-
board/freescale/mx28evk/mx28evk.c | 4 +-
board/freescale/mx35pdk/README | 78 +-
board/freescale/mx35pdk/mx35pdk.c | 25 +
board/freescale/mx6qsabrelite/mx6qsabrelite.c | 24 +-
board/genesi/mx51_efikamx/Makefile | 6 +-
board/genesi/mx51_efikamx/efikamx-usb.c | 12 +
board/genesi/mx51_efikamx/efikamx.c | 3 -
board/keymile/common/ivm.c | 2 +-
board/keymile/km_arm/km_arm.c | 20 -
board/nvidia/common/board.c | 8 +-
board/nvidia/dts/tegra20-harmony.dts | 10 +
board/nvidia/dts/tegra20-seaboard.dts | 10 +
board/nvidia/harmony/Makefile | 4 -
board/nvidia/harmony/harmony.c | 4 +-
board/nvidia/seaboard/Makefile | 4 -
board/nvidia/seaboard/seaboard.c | 4 +-
board/nvidia/ventana/Makefile | 4 +-
board/nvidia/whistler/Makefile | 4 -
board/nvidia/whistler/whistler.c | 4 +-
board/taskit/stamp9g20/stamp9g20.c | 21 +-
board/technexion/twister/twister.c | 10 +
board/teejet/mt_ventoux/mt_ventoux.c | 113 +++
board/teejet/mt_ventoux/mt_ventoux.h | 80 +-
boards.cfg | 3 +-
common/cmd_nand.c | 4 +-
common/env_mmc.c | 64 +-
doc/README.kwbimage | 19 +-
.../nand/nvidia,tegra20-nand.txt | 53 +
drivers/gpio/tegra_gpio.c | 8 +-
drivers/i2c/tegra_i2c.c | 12 +-
drivers/input/Makefile | 2 +-
drivers/mmc/mmc.c | 3 +-
drivers/mmc/mxsmmc.c | 4 +
drivers/mmc/tegra_mmc.c | 34 +-
drivers/mtd/nand/Makefile | 1 +
drivers/mtd/nand/mxs_nand.c | 2 +-
drivers/mtd/nand/nand_base.c | 3 +-
drivers/mtd/nand/tegra_nand.c | 1026
++++++++++++++++++++
drivers/mtd/nand/tegra_nand.h | 257 +++++
drivers/spi/kirkwood_spi.c | 5 +-
drivers/spi/mxs_spi.c | 58 +-
drivers/spi/tegra_spi.c | 6 +-
drivers/video/omap3_dss.c | 3 +-
include/configs/eb_cpux9k2.h | 7 +-
include/configs/edminiv2.h | 13 +-
include/configs/flea3.h | 1 -
include/configs/harmony.h | 19 +-
include/configs/ima3-mx53.h | 3 +-
include/configs/imx31_litekit.h | 1 -
include/configs/imx31_phycore.h | 1 -
include/configs/integrator-common.h | 103 ++
include/configs/integratorap.h | 49 +-
include/configs/integratorcp.h | 115 +--
include/configs/km/keymile-common.h | 1 -
include/configs/km/km_arm.h | 6 +-
include/configs/m28evk.h | 4 +-
include/configs/medcom.h | 6 +-
include/configs/mt_ventoux.h | 17 +
include/configs/mx25pdk.h | 1 -
include/configs/mx28evk.h | 86 +-
include/configs/mx31ads.h | 2 -
include/configs/mx31pdk.h | 2 -
include/configs/mx35pdk.h | 18 +-
include/configs/paz00.h | 9 +-
include/configs/plutux.h | 6 +-
include/configs/qong.h | 2 -
include/configs/sc_sps_1.h | 2 -
include/configs/seaboard.h | 30 +-
include/configs/stamp9g20.h | 1 +
include/configs/tam3517-common.h | 66 ++
include/configs/tec.h | 18
+- .../{tegra20-common-post.h => tegra-common-post.h} | 12 +-
include/configs/tegra20-common.h | 14 +-
include/configs/trimslice.h | 8 +-
include/configs/tt01.h | 2 -
include/configs/ventana.h | 9 +-
include/configs/whistler.h | 11 +-
include/configs/zmx25.h | 1 -
include/fdtdec.h | 1 +
include/linux/mtd/nand.h | 7 +-
include/mmc.h | 1 +
lib/fdtdec.c | 1 + 134 files
changed, 2522 insertions(+), 816 deletions(-) rename
arch/arm/{cpu/armv7 => }/imx-common/Makefile (94%) rename
arch/arm/{cpu/armv7 => }/imx-common/cmd_bmode.c (100%) rename
arch/arm/{cpu/armv7 => }/imx-common/cpu.c (100%) rename
arch/arm/{cpu/armv7/imx-common/i2c.c => imx-common/i2c-mxv7.c} (100%)
rename arch/arm/{cpu/armv7 => }/imx-common/iomux-v3.c (100%) rename
arch/arm/{cpu/armv7 => }/imx-common/speed.c (100%) rename
arch/arm/{cpu/armv7 => }/imx-common/timer.c (100%) rename {drivers/mmc
=> arch/arm/include/asm/arch-tegra20}/tegra_mmc.h (96%) create mode
100644 doc/device-tree-bindings/nand/nvidia,tegra20-nand.txt create
mode 100644 drivers/mtd/nand/tegra_nand.c create mode 100644
drivers/mtd/nand/tegra_nand.h create mode 100644
include/configs/integrator-common.h rename
include/configs/{tegra20-common-post.h => tegra-common-post.h} (96%)
Amicalement,
--
Albert.
More information about the U-Boot
mailing list