[U-Boot] Pull request: u-boot-arm/master
Tom Rini
trini at ti.com
Sat Sep 22 02:21:34 CEST 2012
On Fri, Sep 21, 2012 at 11:35:17PM +0200, Albert ARIBAUD wrote:
> Hello Wolfgang,
>
> The following changes since commit
> 6e2fbdea1b26d75314d87c380a36b0015bf824cf:
>
> Merge branch 'agust at denx.de' of git://git.denx.de/u-boot-staging
> (2012-09-02 00:44:09 +0200)
>
> are available in the git repository at:
>
>
> git://git.denx.de/u-boot-arm master
>
> for you to fetch changes up to d193c1b6eb05041c94ad9aacd8c94189d1dbc5f8:
>
> Merge remote-tracking branch 'u-boot-imx/master' (2012-09-21 00:26:19
> +0200)
>
> ----------------------------------------------------------------
>
> Albert ARIBAUD (4):
> edminiv2: orion5x: fix GPIO inits and values
> Merge remote-tracking branch 'u-boot-atmel/master' into m
> Merge remote-tracking branch 'u-boot-ti/master' into m
> Merge remote-tracking branch 'u-boot-imx/master'
>
> Arnout Vandecappelle (Essensium/Mind) (1):
> OMAP3: add definition of CTRL_WKUP_CTRL register
>
> Ashok Kumar Reddy (2):
> ima3-mx53:Rename CONFIG_PRIME => CONFIG_ETHPRME, remove
> mx6qsabrelite:Use IMX_GPIO_NR Macro
>
> Beno??t Th??baudeau (8):
> mx35: Fix decode_pll
> mx35: Add definitions for clock gate values
> mx35: Fix clock dividers
> mx25: Define default SoC input clock frequencies
> mx35: Define default SoC input clock frequencies
> mx35 timer: Switch to 32-kHz source
> Fix mx31_decode_pll
> mx31: Define default SoC input clock frequencies
>
> Fabio Estevam (3):
> mx28evk: Convert to mxs_adjust_memory_params()
> mx28evk: Add USB Ethernet support
> mx35pdk: README: Remove NAND references
>
> Holger Brunck (1):
> arm/km: remove unused code
>
> Jens Scharsig (2):
> eb_cpux9k2: fix chip select
> atmel: eb_cpux9k2: add ram target configuration
>
> Jim Lin (1):
> tegra: nand: Add Tegra NAND driver
>
> Karl O. Pinc (2):
> Cosmetic doc typo fixes to the kwbimage feature docs
> cosmetic: Better explain how to use the kirkwood kwbimage.cfg
> file.
>
> Linus Walleij (1):
> integrator: break out common config
>
> Lucas Stach (1):
> tegra20: usb: rework set_host_mode
>
> Marek Vasut (7):
> M28: Fix the use of gpmi-nand in mtdparts
> MX28: Cleanup mxsboot within make mrproper
> MX28: Fixup the ad-hoc use of DIGCTL_MICROSECONDS
> SCSPS1: Enable caches
> MX28: SPI: Fix the DMA DCache race condition
> MX28: SPI: Fix the DMA chaining
> MX28: MMC: Avoid DMA DCache race condition
>
> Markus Hubig (2):
> arm: Adds board_postclk_init to the init_sequence.
> Fixes the crippled console output on PortuxG20.
>
> Matt Sealey (1):
> efikamx: refine USB support
>
> Michael Walle (1):
> lsxl: support power switch
>
> Otavio Salvador (3):
> MX28: mx28evk: Align SSP clock speed
> MX28: mx28evk: Enable SPI DMA
> mx28evk: extend default environment
>
> Simon Glass (5):
> nand: Try to align the default buffers
> tegra: Add NAND support to funcmux
> tegra: fdt: Add NAND controller binding and definitions
> tegra: fdt: Add NAND definitions to fdt
> tegra: Enable NAND on Seaboard
>
> Stefano Babic (12):
> OMAP3: tam3517: add function to read MAC from EEPROM
> OMAP3: twister : get MAC address from EEPROM
> OMAP3: mt_ventoux: Correct board pinmux
> OMAP3: mt_ventoux: activate GPIO4
> OMAP3: mt_ventoux: read MAC address from EEPROM
> OMAP3: mt_ventoux: disable the buzzer at start-up
> video: drop duplicate set of DISPC_CONFIG register
> OMAP3: video: add macros to set display parameters
> OMAP3: mt_ventoux: added video support
> MX: set a common place to share code for Freescale i.MX
> MX35: mx35pdk: add support for MMC
> MX6: drop binary constants from iomux header
>
> Stephen Warren (6):
> tegra: enable NAND on Harmony
> mmc: detect boot sectors using EXT_CSD_BOOT_MULT too
> env_mmc: allow environment to be in an eMMC partition
> tegra: put eMMC environment into the boot sectors
> ARM: tegra: remove redundant mkdirs from board Makefiles
> ARM: tegra: fix Ventana standalone build
>
> Thierry Reding (2):
> cmd_nand: dump: Align data and OOB buffers
> tegra: Enable NAND on TEC
>
> Tom Rini (1):
> am33xx: Remove redundant timer config
>
> Tom Warren (2):
> Tegra: Change Tegra20 to Tegra in common code, prep for T30
> NAND: MXS: include common.h first so cache.h is included in
> correct order
>
> Valentin Longchamp (4):
> km/arm: set SPI NOR Flash default parameters
> kw_spi: fix clock prescaler computation
> km/ivm: fix string len check to support 7 char board names
> arm/km: fix frequency of the SPI NOR Flash
>
> Makefile | 8 +-
> arch/arm/cpu/arm1136/mx31/generic.c | 12 +-
> arch/arm/cpu/arm1136/mx31/timer.c | 16 +-
> arch/arm/cpu/arm1136/mx35/generic.c | 90 +-
> arch/arm/cpu/arm1136/mx35/timer.c | 46 +-
> arch/arm/cpu/arm720t/tegra20/cpu.c | 8 +-
> arch/arm/cpu/arm926ejs/mx25/generic.c | 2 +-
> arch/arm/cpu/arm926ejs/mx25/timer.c | 16 +-
> arch/arm/cpu/arm926ejs/mxs/spl_boot.c | 8 +-
> arch/arm/cpu/arm926ejs/orion5x/cpu.c | 2 +
> arch/arm/cpu/armv7/am33xx/board.c | 20 -
> arch/arm/cpu/armv7/tegra20/cmd_enterrcm.c | 2 +-
> arch/arm/cpu/armv7/tegra20/usb.c | 37 +-
> arch/arm/cpu/tegra20-common/Makefile | 2 +-
> arch/arm/cpu/tegra20-common/ap20.c | 6 +-
> arch/arm/cpu/tegra20-common/board.c | 14 +-
> arch/arm/cpu/tegra20-common/funcmux.c | 7 +
> arch/arm/cpu/tegra20-common/warmboot.c | 14 +-
> arch/arm/cpu/tegra20-common/warmboot_avp.c | 2 +-
> arch/arm/dts/tegra20.dtsi | 7 +
> arch/arm/{cpu/armv7 => }/imx-common/Makefile | 4 +-
> arch/arm/{cpu/armv7 => }/imx-common/cmd_bmode.c | 0
> arch/arm/{cpu/armv7 => }/imx-common/cpu.c | 0
> .../imx-common/i2c.c => imx-common/i2c-mxv7.c} | 0
> arch/arm/{cpu/armv7 => }/imx-common/iomux-v3.c | 0
> arch/arm/{cpu/armv7 => }/imx-common/speed.c | 0
> arch/arm/{cpu/armv7 => }/imx-common/timer.c | 0
> arch/arm/include/asm/arch-kirkwood/spi.h | 1 +
> arch/arm/include/asm/arch-mx25/clock.h | 14 +
> arch/arm/include/asm/arch-mx31/clock.h | 14 +
> arch/arm/include/asm/arch-mx35/clock.h | 14 +
> arch/arm/include/asm/arch-mx35/crm_regs.h | 48 +-
> arch/arm/include/asm/arch-mx6/iomux.h | 124 +--
> arch/arm/include/asm/arch-omap3/dss.h | 11 +-
> arch/arm/include/asm/arch-omap3/mux.h | 5 +
> arch/arm/include/asm/arch-tegra20/ap20.h | 3 -
> arch/arm/include/asm/arch-tegra20/funcmux.h | 3 +
> arch/arm/include/asm/arch-tegra20/mmc.h | 8 +-
> arch/arm/include/asm/arch-tegra20/sys_proto.h | 4 +-
> arch/arm/include/asm/arch-tegra20/tegra20.h | 13 +-
> .../arm/include/asm/arch-tegra20}/tegra_mmc.h | 12 +-
> arch/arm/include/asm/arch-tegra20/tegra_spi.h | 2 +-
> arch/arm/include/asm/arch-tegra20/timer.h | 4 +-
> arch/arm/lib/board.c | 3 +
> board/BuS/eb_cpux9k2/cpux9k2.c | 6 +-
> board/Marvell/sheevaplug/kwbimage.cfg | 4 +-
> board/avionic-design/common/tamonten.c | 2 +-
> board/avionic-design/dts/tegra20-tec.dts | 11 +
> board/buffalo/lsxl/lsxl.c | 22 +-
> board/compal/paz00/paz00.c | 4 +-
> board/compulab/trimslice/trimslice.c | 4 +-
> board/freescale/mx28evk/iomux.c | 2 +-
> board/freescale/mx28evk/mx28evk.c | 4 +-
> board/freescale/mx35pdk/README | 78 +-
> board/freescale/mx35pdk/mx35pdk.c | 25 +
> board/freescale/mx6qsabrelite/mx6qsabrelite.c | 24 +-
> board/genesi/mx51_efikamx/Makefile | 6 +-
> board/genesi/mx51_efikamx/efikamx-usb.c | 12 +
> board/genesi/mx51_efikamx/efikamx.c | 3 -
> board/keymile/common/ivm.c | 2 +-
> board/keymile/km_arm/km_arm.c | 20 -
> board/nvidia/common/board.c | 8 +-
> board/nvidia/dts/tegra20-harmony.dts | 10 +
> board/nvidia/dts/tegra20-seaboard.dts | 10 +
> board/nvidia/harmony/Makefile | 4 -
> board/nvidia/harmony/harmony.c | 4 +-
> board/nvidia/seaboard/Makefile | 4 -
> board/nvidia/seaboard/seaboard.c | 4 +-
> board/nvidia/ventana/Makefile | 4 +-
> board/nvidia/whistler/Makefile | 4 -
> board/nvidia/whistler/whistler.c | 4 +-
> board/taskit/stamp9g20/stamp9g20.c | 21 +-
> board/technexion/twister/twister.c | 10 +
> board/teejet/mt_ventoux/mt_ventoux.c | 113 +++
> board/teejet/mt_ventoux/mt_ventoux.h | 80 +-
> boards.cfg | 3 +-
> common/cmd_nand.c | 4 +-
> common/env_mmc.c | 64 +-
> doc/README.kwbimage | 19 +-
> .../nand/nvidia,tegra20-nand.txt | 53 +
> drivers/gpio/tegra_gpio.c | 8 +-
> drivers/i2c/tegra_i2c.c | 12 +-
> drivers/input/Makefile | 2 +-
> drivers/mmc/mmc.c | 3 +-
> drivers/mmc/mxsmmc.c | 4 +
> drivers/mmc/tegra_mmc.c | 34 +-
> drivers/mtd/nand/Makefile | 1 +
> drivers/mtd/nand/mxs_nand.c | 2 +-
> drivers/mtd/nand/nand_base.c | 3 +-
> drivers/mtd/nand/tegra_nand.c | 1026
> ++++++++++++++++++++
> drivers/mtd/nand/tegra_nand.h | 257 +++++
> drivers/spi/kirkwood_spi.c | 5 +-
> drivers/spi/mxs_spi.c | 58 +-
> drivers/spi/tegra_spi.c | 6 +-
> drivers/video/omap3_dss.c | 3 +-
> include/configs/eb_cpux9k2.h | 7 +-
> include/configs/edminiv2.h | 13 +-
> include/configs/flea3.h | 1 -
> include/configs/harmony.h | 19 +-
> include/configs/ima3-mx53.h | 3 +-
> include/configs/imx31_litekit.h | 1 -
> include/configs/imx31_phycore.h | 1 -
> include/configs/integrator-common.h | 103 ++
> include/configs/integratorap.h | 49 +-
> include/configs/integratorcp.h | 115 +--
> include/configs/km/keymile-common.h | 1 -
> include/configs/km/km_arm.h | 6 +-
> include/configs/m28evk.h | 4 +-
> include/configs/medcom.h | 6 +-
> include/configs/mt_ventoux.h | 17 +
> include/configs/mx25pdk.h | 1 -
> include/configs/mx28evk.h | 86 +-
> include/configs/mx31ads.h | 2 -
> include/configs/mx31pdk.h | 2 -
> include/configs/mx35pdk.h | 18 +-
> include/configs/paz00.h | 9 +-
> include/configs/plutux.h | 6 +-
> include/configs/qong.h | 2 -
> include/configs/sc_sps_1.h | 2 -
> include/configs/seaboard.h | 30 +-
> include/configs/stamp9g20.h | 1 +
> include/configs/tam3517-common.h | 66 ++
> include/configs/tec.h | 18
> +- .../{tegra20-common-post.h => tegra-common-post.h} | 12 +-
> include/configs/tegra20-common.h | 14 +-
> include/configs/trimslice.h | 8 +-
> include/configs/tt01.h | 2 -
> include/configs/ventana.h | 9 +-
> include/configs/whistler.h | 11 +-
> include/configs/zmx25.h | 1 -
> include/fdtdec.h | 1 +
> include/linux/mtd/nand.h | 7 +-
> include/mmc.h | 1 +
> lib/fdtdec.c | 1 + 134 files
> changed, 2522 insertions(+), 816 deletions(-) rename
> arch/arm/{cpu/armv7 => }/imx-common/Makefile (94%) rename
> arch/arm/{cpu/armv7 => }/imx-common/cmd_bmode.c (100%) rename
> arch/arm/{cpu/armv7 => }/imx-common/cpu.c (100%) rename
> arch/arm/{cpu/armv7/imx-common/i2c.c => imx-common/i2c-mxv7.c} (100%)
> rename arch/arm/{cpu/armv7 => }/imx-common/iomux-v3.c (100%) rename
> arch/arm/{cpu/armv7 => }/imx-common/speed.c (100%) rename
> arch/arm/{cpu/armv7 => }/imx-common/timer.c (100%) rename {drivers/mmc
> => arch/arm/include/asm/arch-tegra20}/tegra_mmc.h (96%) create mode
> 100644 doc/device-tree-bindings/nand/nvidia,tegra20-nand.txt create
> mode 100644 drivers/mtd/nand/tegra_nand.c create mode 100644
> drivers/mtd/nand/tegra_nand.h create mode 100644
> include/configs/integrator-common.h rename
> include/configs/{tegra20-common-post.h => tegra-common-post.h} (96%)
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20120921/7aa3a350/attachment.pgp>
More information about the U-Boot
mailing list