[U-Boot] [GIT PULL] Pull request: u-boot-imx
Albert ARIBAUD
albert.u.boot at aribaud.net
Sat Sep 1 14:57:27 CEST 2012
Hi Stefano,
On Mon, 27 Aug 2012 08:41:16 +0200, Stefano Babic <sbabic at denx.de>
wrote:
> Hi Albert,
>
> please pull from u-boot-imx, thanks.
>
> The following changes since commit
> 5f50310588e87f2ff501992564d1b05df71419f4:
>
> davinci, c6x: Always use C version of reset code (2012-08-25
> 13:40:03 +0200)
>
> are available in the git repository at:
>
> git://www.denx.de/git/u-boot-imx.git master
>
> for you to fetch changes up to
> ff1728c902587c2dc76869a30a32013ef005b84a:
>
> mxs: Convert timeout parameter to 'unsigned int' (2012-08-27
> 08:28:01 +0200)
>
> ----------------------------------------------------------------
> Ashok Kumar Reddy (1):
> mx6qarm2:Use IMX_GPIO_NR macro
>
> Benoît Thébaudeau (17):
> mxc_spi: Round up clock divider
> mx25: Enable dcache
> mx5: Enable dcache
> mx35: Fix typo on EDIO
> mx3: Fix typo on IPU_CONF_CSI_EN
> mx5/6 timer: Round up tick_to_time() value
> mx5: cosmetic: Clean up lowlevel_init
> mx35: Remove duplicate GPIO3_BASE_ADDR
> mx5/6: Fix cpu_mmc_init() return value
> mx35: Add cpu_mmc_init()
> mx5: Undeclare imx_decode_pll()
> mx35 iomux: Remove unused macro
> mx35: Fix broken pin definitions
> mx35: Remove declaration of non-existing function
> mx35: Move clock enums to clock.h
> mx35: Remove declaration of non-existing function
> mxc: Make gpio_get_value() use PSR
>
> Fabio Estevam (7):
> m28evk: Turn on caches
> apx4devkit: Turn on caches
> mx28evk: Remove unneeded 'undef'
> mxs: Use correct function name to initialize dram
> mx53loco: Use IMX_GPIO_NR macro
> mx51evk: Use IMX_GPIO_NR macro
> mx53ard: Use IMX_GPIO_NR macro
>
> Marek Vasut (7):
> MX28: Drop the cp15 reconfiguration from SPL
> MX28: Shuffle around the power management code
> MX28: DMA: Align the struct mxs_dma_desc
> MX28: DMA: Prolong the DMA timeout
> MX28: SPI: Supercharge the SPI driver
> MX28: m28evk: Align SSP clock speed
> MX28: m28evk: Enable SPI DMA
>
> Matt Sealey (7):
> spi: fix mxc_spi_slave structure allocation to clear memory
> spi: fix mxs_spi_slave structure allocation to clear memory
> mx5: add iomux-mx51.h include
> efikamx: move and rename Efika MX directories and config files
> to prepare for new boards
> efikamx: remove drive strength function and roll its
> functionality into the DCD
> efikamx: configure Smarttop PCBID and LED pads in DCD for
> convenience efikamx: update MAINTAINERS for Genesi Efika MX systems
>
> Otavio Salvador (9):
> mxs: Remove not required explicit iomux-mx28.h include
> mxs: Remove not required include of iomux-mx28.h
> mxs: rename regs-clkctrl.h to regs-clkctrl-mx28.h
> mxs: Convert sys_proto.h prefixes to 'mxs'
> MX28: config: Allow different target generation in elftosb call
> MX28: Move "regs-base.h" include after SoC type configuration
> mxs: Replace i.MX233 by i.MX23 on copyright header
> mxs: Only build internal Ethernet controller for i.MX28
> mxs: Rename 'mx28_dram_init' to 'mxs_dram_init'
>
> Stefano Babic (1):
> MX: Set a common gpio.h for all i.MX
>
> Troy Kisky (4):
> iomux: move IOMUX_GPR13_xxx defines
> imx-common/cmd_bmode.c: add imx bmode (bootmode) command
> mx6qsabrelite: add boot_mode support
> mx53evk: add boot_mode support
>
> Vikram Narayanan (1):
> tx25: Use generic gpio_* calls
>
> fabio.estevam at freescale.com (1):
> mxs: Convert timeout parameter to 'unsigned int'
>
> trem (3):
> rtc: add support of mx27 rtc
> gpio: add gpio api support to mx27 (v4)
> imx27lite: update with gpio api change (v4)
>
> MAINTAINERS | 7 +-
> Makefile | 5 +-
> arch/arm/cpu/arm1136/mx35/generic.c | 19 ++-
> arch/arm/cpu/arm1136/mx35/iomux.c | 2 -
> arch/arm/cpu/arm926ejs/mx25/generic.c | 8 +
> arch/arm/cpu/arm926ejs/mx27/generic.c | 11 +-
> arch/arm/cpu/arm926ejs/mxs/mxs.c | 40 ++---
> arch/arm/cpu/arm926ejs/mxs/spl_boot.c | 7 +-
> arch/arm/cpu/arm926ejs/mxs/spl_mem_init.c | 1 -
> arch/arm/cpu/arm926ejs/mxs/spl_power_init.c | 9 +-
> arch/arm/cpu/arm926ejs/mxs/start.S | 42 -----
> arch/arm/cpu/arm926ejs/mxs/timer.c | 2 +-
> .../arm926ejs/mxs/{u-boot.bd => u-boot-imx28.bd} | 0
> arch/arm/cpu/armv7/imx-common/Makefile | 1 +
> arch/arm/cpu/armv7/imx-common/cmd_bmode.c | 119
> ++++++++++++++ arch/arm/cpu/armv7/imx-common/cpu.c
> | 6 +- arch/arm/cpu/armv7/imx-common/timer.c | 2 +-
> arch/arm/cpu/armv7/mx5/lowlevel_init.S | 46 +++---
> arch/arm/cpu/armv7/mx5/soc.c | 39 +++++
> arch/arm/cpu/armv7/mx6/soc.c | 36 +++++
> arch/arm/include/asm/arch-mx25/gpio.h | 17 +-
> arch/arm/include/asm/arch-mx27/gpio.h | 55 +++++++
> arch/arm/include/asm/arch-mx27/imx-regs.h | 33 ++--
> arch/arm/include/asm/arch-mx27/regs-rtc.h | 40 +++++
> arch/arm/include/asm/arch-mx31/gpio.h | 7 +-
> arch/arm/include/asm/arch-mx31/imx-regs.h | 2 +-
> arch/arm/include/asm/arch-mx35/clock.h | 28 +++-
> arch/arm/include/asm/arch-mx35/crm_regs.h | 4 +-
> arch/arm/include/asm/arch-mx35/gpio.h | 12 +-
> arch/arm/include/asm/arch-mx35/imx-regs.h | 29 +---
> arch/arm/include/asm/arch-mx35/mx35_pins.h | 3 -
> arch/arm/include/asm/arch-mx35/sys_proto.h | 1 -
> arch/arm/include/asm/arch-mx5/clock.h | 2 -
> arch/arm/include/asm/arch-mx5/gpio.h | 7 +-
> arch/arm/include/asm/arch-mx5/imx-regs.h | 18 +++
> arch/arm/include/asm/arch-mx5/iomux-mx51.h | 164
> ++++++++++++++++++++
> arch/arm/include/asm/arch-mx6/gpio.h | 7 +-
> arch/arm/include/asm/arch-mx6/imx-regs.h | 23 ++-
> arch/arm/include/asm/arch-mx6/iomux.h | 129
> +++++++++++++++ arch/arm/include/asm/arch-mxs/dma.h
> | 3 +- arch/arm/include/asm/arch-mxs/imx-regs.h | 2 +-
> .../{regs-clkctrl.h => regs-clkctrl-mx28.h} | 0
> arch/arm/include/asm/arch-mxs/sys_proto.h | 24 +--
> arch/arm/include/asm/imx-common/boot_mode.h | 36 +++++
> arch/arm/include/asm/imx-common/gpio.h | 39 +++++
> arch/arm/include/asm/imx-common/iomux-v3.h | 111
> ------------- board/CarMediaLab/flea3/flea3.c |
> 6 +- board/bluegiga/apx4devkit/apx4devkit.c | 4 +-
> board/denx/m28evk/m28evk.c | 6 +-
> board/freescale/mx28evk/mx28evk.c | 2 +-
> board/freescale/mx35pdk/mx35pdk.c | 2 +-
> board/freescale/mx51evk/mx51evk.c | 6 +-
> board/freescale/mx53ard/mx53ard.c | 2 +-
> board/freescale/mx53evk/mx53evk.c | 13 ++
> board/freescale/mx53loco/mx53loco.c | 2 +-
> board/freescale/mx6qarm2/mx6qarm2.c | 4 +-
> board/freescale/mx6qsabrelite/mx6qsabrelite.c | 43 +++--
> board/{efikamx => genesi/mx51_efikamx}/Makefile | 0
> .../{efikamx => genesi/mx51_efikamx}/efikamx-usb.c | 2 +-
> board/{efikamx => genesi/mx51_efikamx}/efikamx.c | 77 ---------
> .../mx51_efikamx}/imximage_mx.cfg | 50 +++---
> .../mx51_efikamx}/imximage_sb.cfg | 0
> board/karo/tx25/tx25.c | 25 ++-
> board/logicpd/imx27lite/imx27lite.c | 5 +-
> board/schulercontrol/sc_sps_1/sc_sps_1.c | 2 +-
> board/syteco/zmx25/zmx25.c | 26 ++--
> boards.cfg | 4 +-
> drivers/dma/apbh_dma.c | 6 +-
> drivers/gpio/mxc_gpio.c | 10 +-
> drivers/i2c/mxs_i2c.c | 2 +-
> drivers/mmc/mxsmmc.c | 2 +-
> drivers/mtd/nand/mxs_nand.c | 6 +-
> drivers/rtc/Makefile | 1 +
> drivers/rtc/mx27rtc.c | 83 ++++++++++
> drivers/rtc/mxsrtc.c | 4 +-
> drivers/spi/mxc_spi.c | 6 +-
> drivers/spi/mxs_spi.c | 106
> ++++++++----- drivers/usb/host/ehci-mxs.c |
> 2 +- include/configs/apx4devkit.h | 6 +-
> include/configs/imx27lite-common.h | 5 +
> include/configs/m28evk.h | 11 +-
> include/configs/mx28evk.h | 6 +-
> include/configs/{efikamx.h => mx51_efikamx.h} | 0
> include/configs/mx53evk.h | 3 +
> include/configs/mx6qsabrelite.h | 6 +-
> include/configs/sc_sps_1.h | 4 +-
> 86 files changed, 1163 insertions(+), 585 deletions(-)
> rename arch/arm/cpu/arm926ejs/mxs/{u-boot.bd => u-boot-imx28.bd}
> (100%) create mode 100644 arch/arm/cpu/armv7/imx-common/cmd_bmode.c
> create mode 100644 arch/arm/include/asm/arch-mx27/gpio.h
> create mode 100644 arch/arm/include/asm/arch-mx27/regs-rtc.h
> create mode 100644 arch/arm/include/asm/arch-mx5/iomux-mx51.h
> create mode 100644 arch/arm/include/asm/arch-mx6/iomux.h
> rename arch/arm/include/asm/arch-mxs/{regs-clkctrl.h =>
> regs-clkctrl-mx28.h} (100%)
> create mode 100644 arch/arm/include/asm/imx-common/boot_mode.h
> create mode 100644 arch/arm/include/asm/imx-common/gpio.h
> rename board/{efikamx => genesi/mx51_efikamx}/Makefile (100%)
> rename board/{efikamx => genesi/mx51_efikamx}/efikamx-usb.c (99%)
> rename board/{efikamx => genesi/mx51_efikamx}/efikamx.c (85%)
> rename board/{efikamx => genesi/mx51_efikamx}/imximage_mx.cfg (71%)
> rename board/{efikamx => genesi/mx51_efikamx}/imximage_sb.cfg (100%)
> create mode 100644 drivers/rtc/mx27rtc.c
> rename include/configs/{efikamx.h => mx51_efikamx.h} (100%)
>
Applied to u-boot-arm/master, thanks!
Amicalement,
--
Albert.
More information about the U-Boot
mailing list