[U-Boot] [PATCH] net/phy: support the mv88e6352 switch

[Valentin Longchamp]

On 08/17/2012 09:59 AM, Prafulla Wadaskar wrote:
> 
> 
>> -----Original Message-----
>> From: Valentin Longchamp [mailto:valentin.longchamp at keymile.com]
>> Sent: 16 August 2012 16:47
>> To: u-boot at lists.denx.de
>> Cc: Valentin Longchamp; Holger Brunck; Prafulla Wadaskar; Joe
>> Hershberger
>> Subject: [PATCH] net/phy: support the mv88e6352 switch
>>
>> This patch add support for the configuration of an external switch
>> from
>> the 88E6xxx series from Marvell trough an MDIO link using indirect
>> adressing. This can be used if we do not want to use an EEPROM for the
>> configuration.
>>
>> This driver is not generic and was not tested on other switches than
>> the
>> 88e6352. This is proposed as a first implementation that is somewhat
>> limited but works and that can be used as a basis for further
>> developments for this switch family.
>>
>> Signed-off-by: Valentin Longchamp <valentin.longchamp at keymile.com>
>> cc: Holger Brunck <holger.brunck at keymile.com>
>> cc: Prafulla Wadaskar <prafulla at marvell.com>
>> cc: Joe Hershberger <joe.hershberger at gmail.com>
>> ---
>>  drivers/net/phy/Makefile    |    1 +
>>  drivers/net/phy/mv88e6352.c |  318
>> +++++++++++++++++++++++++++++++++++++++++++
>>  include/mv88e6352.h         |   92 +++++++++++++
>>  3 files changed, 411 insertions(+), 0 deletions(-)
>>  create mode 100644 drivers/net/phy/mv88e6352.c
>>  create mode 100644 include/mv88e6352.h
> 
> Hi Valentin
> 
> I do not have any specific feedback for this patch,
> To me this looks okay.
> 
> Joe may pull it if he finds everything okay.
> 
> Regards...
> Prafulla . . .
> 


Hi Joe,

We have never received any feedback from you regarding this patch. Could you
please consider review it and if applicable apply it since it is a dependency
for another series in the Marvell tree.

Thank you and best regards

Valentin