[U-Boot] [PATCH 3/4] usb: add support for multiple usb controllers

Lucas Stach dev at lynxeye.de
Wed Sep 26 00:14:36 CEST 2012


Allows to initialize more than one USB controller at once.

v2: print message when controller stop fails

Signed-off-by: Lucas Stach <dev at lynxeye.de>
Reviewed-by: Marek Vasut <marex at denx.de>
---
 common/cmd_usb.c            |  16 +++++--
 common/usb.c                | 106 +++++++++++++++++++++++---------------------
 common/usb_storage.c        |   2 +-
 drivers/usb/eth/usb_ether.c |   2 +-
 4 Dateien geändert, 70 Zeilen hinzugefügt(+), 56 Zeilen entfernt(-)

diff --git a/common/cmd_usb.c b/common/cmd_usb.c
index a8e3ae5..6cefc0c 100644
--- a/common/cmd_usb.c
+++ b/common/cmd_usb.c
@@ -517,8 +517,7 @@ int do_usb(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 		bootstage_mark_name(BOOTSTAGE_ID_USB_START, "usb_start");
 		usb_stop();
 		printf("(Re)start USB...\n");
-		i = usb_init();
-		if (i >= 0) {
+		if (usb_init() >= 0) {
 #ifdef CONFIG_USB_STORAGE
 			/* try to recognize storage devices immediately */
 			usb_stor_curr_dev = usb_stor_scan(1);
@@ -527,6 +526,9 @@ int do_usb(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 			/* try to recognize ethernet devices immediately */
 			usb_ether_curr_dev = usb_host_eth_scan(1);
 #endif
+#ifdef CONFIG_USB_KEYBOARD
+			drv_usb_kbd_init();
+#endif
 		}
 		return 0;
 	}
@@ -553,8 +555,14 @@ int do_usb(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 		return 1;
 	}
 	if (strncmp(argv[1], "tree", 4) == 0) {
-		printf("\nDevice Tree:\n");
-		usb_show_tree(usb_get_dev_index(0));
+		puts("USB device tree:\n");
+		for (i = 0; i < USB_MAX_DEVICE; i++) {
+			dev = usb_get_dev_index(i);
+			if (dev == NULL)
+				break;
+			if (dev->parent == NULL)
+				usb_show_tree(dev);
+		}
 		return 0;
 	}
 	if (strncmp(argv[1], "inf", 3) == 0) {
diff --git a/common/usb.c b/common/usb.c
index e58b6f4..1c9763c 100644
--- a/common/usb.c
+++ b/common/usb.c
@@ -72,45 +72,72 @@
 
 static struct usb_device usb_dev[USB_MAX_DEVICE];
 static int dev_index;
-static int running;
 static int asynch_allowed;
 
 char usb_started; /* flag for the started/stopped USB status */
-void *ctrl; /* goes away in a following commit, but don't break bisect */
 
-/**********************************************************************
- * some forward declerations...
- */
-static void usb_scan_devices(void);
+#ifndef CONFIG_USB_MAX_CONTROLLER_COUNT
+#define CONFIG_USB_MAX_CONTROLLER_COUNT 1
+#endif
 
 /***************************************************************************
  * Init USB Device
  */
-
 int usb_init(void)
 {
-	int result;
+	void *ctrl;
+	struct usb_device *dev;
+	int i, start_index = 0;
 
-	running = 0;
 	dev_index = 0;
 	asynch_allowed = 1;
 	usb_hub_reset();
+
+	/* first make all devices unknown */
+	for (i = 0; i < USB_MAX_DEVICE; i++) {
+		memset(&usb_dev[i], 0, sizeof(struct usb_device));
+		usb_dev[i].devnum = -1;
+	}
+
 	/* init low_level USB */
-	printf("USB:   ");
-	result = usb_lowlevel_init(0, &ctrl);
-	/* if lowlevel init is OK, scan the bus for devices
-	 * i.e. search HUBs and configure them */
-	if (result == 0) {
-		printf("scanning bus for devices... ");
-		running = 1;
-		usb_scan_devices();
+	for (i = 0; i < CONFIG_USB_MAX_CONTROLLER_COUNT; i++) {
+		/* init low_level USB */
+		printf("USB%d:   ", i);
+		if (usb_lowlevel_init(i, &ctrl)) {
+			puts("lowlevel init failed\n");
+			continue;
+		}
+		/*
+		 * lowlevel init is OK, now scan the bus for devices
+		 * i.e. search HUBs and configure them
+		 */
+		start_index = dev_index;
+		printf("scanning bus %d for devices... ", i);
+		dev = usb_alloc_new_device(ctrl);
+		/*
+		 * device 0 is always present
+		 * (root hub, so let it analyze)
+		 */
+		if (dev)
+			usb_new_device(dev);
+
+		if (start_index == dev_index)
+			puts("No USB Device found\n");
+		else
+			printf("%d USB Device(s) found\n",
+				dev_index - start_index);
+
 		usb_started = 1;
-		return 0;
-	} else {
-		printf("Error, couldn't init Lowlevel part\n");
-		usb_started = 0;
+	}
+
+	USB_PRINTF("scan end\n");
+	/* if we were not able to find at least one working bus, bail out */
+	if (!usb_started) {
+		puts("USB error: all controllers failed lowlevel init\n");
 		return -1;
 	}
+
+	return 0;
 }
 
 /******************************************************************************
@@ -118,15 +145,20 @@ int usb_init(void)
  */
 int usb_stop(void)
 {
-	int res = 0;
+	int i;
 
 	if (usb_started) {
 		asynch_allowed = 1;
 		usb_started = 0;
 		usb_hub_reset();
-		res = usb_lowlevel_stop(0);
+
+		for (i = 0; i < CONFIG_USB_MAX_CONTROLLER_COUNT; i++) {
+			if (usb_lowlevel_stop(i))
+				printf("failed to stop USB controller %d\n", i);
+		}
 	}
-	return res;
+
+	return 0;
 }
 
 /*
@@ -751,7 +783,6 @@ struct usb_device *usb_get_dev_index(int index)
 		return &usb_dev[index];
 }
 
-
 /* returns a pointer of a new device structure or NULL, if
  * no device struct is available
  */
@@ -947,29 +978,4 @@ int usb_new_device(struct usb_device *dev)
 	return 0;
 }
 
-/* build device Tree  */
-static void usb_scan_devices(void)
-{
-	int i;
-	struct usb_device *dev;
-
-	/* first make all devices unknown */
-	for (i = 0; i < USB_MAX_DEVICE; i++) {
-		memset(&usb_dev[i], 0, sizeof(struct usb_device));
-		usb_dev[i].devnum = -1;
-	}
-	dev_index = 0;
-	/* device 0 is always present (root hub, so let it analyze) */
-	dev = usb_alloc_new_device(ctrl);
-	if (usb_new_device(dev))
-		printf("No USB Device found\n");
-	else
-		printf("%d USB Device(s) found\n", dev_index);
-	/* insert "driver" if possible */
-#ifdef CONFIG_USB_KEYBOARD
-	drv_usb_kbd_init();
-#endif
-	USB_PRINTF("scan end\n");
-}
-
 /* EOF */
diff --git a/common/usb_storage.c b/common/usb_storage.c
index 4aeed82..950451e 100644
--- a/common/usb_storage.c
+++ b/common/usb_storage.c
@@ -244,7 +244,7 @@ int usb_stor_scan(int mode)
 	struct usb_device *dev;
 
 	if (mode == 1)
-		printf("       scanning bus for storage devices... ");
+		printf("       scanning usb for storage devices... ");
 
 	usb_disable_asynch(1); /* asynch transfer not allowed */
 
diff --git a/drivers/usb/eth/usb_ether.c b/drivers/usb/eth/usb_ether.c
index 6cad6c8..f361e8b 100644
--- a/drivers/usb/eth/usb_ether.c
+++ b/drivers/usb/eth/usb_ether.c
@@ -123,7 +123,7 @@ int usb_host_eth_scan(int mode)
 
 
 	if (mode == 1)
-		printf("       scanning bus for ethernet devices... ");
+		printf("       scanning usb for ethernet devices... ");
 
 	old_async = usb_disable_asynch(1); /* asynch transfer not allowed */
 
-- 
1.7.11.4



More information about the U-Boot mailing list