[U-Boot] [PATCH v2 3/5] Add SDIO/MMC support for Sheevaplug board

[DrEagle]

Add SDIO/MMC support for Sheevaplug board

Signed-off-by: drEagle <dreagle at doukki.net>
---
 board/Marvell/sheevaplug/sheevaplug.c |   11 +++++++++++
 include/configs/sheevaplug.h          |   12 ++++++++++++
 2 files changed, 23 insertions(+)

diff --git a/board/Marvell/sheevaplug/sheevaplug.c b/board/Marvell/sheevaplug/sheevaplug.c
index 688d308..db64a05 100644
--- a/board/Marvell/sheevaplug/sheevaplug.c
+++ b/board/Marvell/sheevaplug/sheevaplug.c
@@ -28,6 +28,9 @@
 #include <asm/arch/kirkwood.h>
 #include <asm/arch/mpp.h>
 #include "sheevaplug.h"
+#ifdef CONFIG_MRVL_MMC
+#include <mrvl_mmc.h>
+#endif /* CONFIG_MRVL_MMC */
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -147,3 +150,11 @@ void reset_phy(void)
 	printf("88E1116 Initialized on %s\n", name);
 }
 #endif /* CONFIG_RESET_PHY_R */
+
+#ifdef CONFIG_MRVL_MMC
+int board_mmc_init(bd_t *bis)
+{
+	mrvl_mmc_initialize(bis);
+	return 0;
+}
+#endif /* CONFIG_MRVL_MMC */
diff --git a/include/configs/sheevaplug.h b/include/configs/sheevaplug.h
index 83dd8ff..7d710bf 100644
--- a/include/configs/sheevaplug.h
+++ b/include/configs/sheevaplug.h
@@ -47,6 +47,7 @@
 #define CONFIG_CMD_DHCP
 #define CONFIG_CMD_ENV
 #define CONFIG_CMD_MII
+#define CONFIG_CMD_MMC
 #define CONFIG_CMD_NAND
 #define CONFIG_CMD_PING
 #define CONFIG_CMD_USB
@@ -98,6 +99,17 @@
 #endif /* CONFIG_CMD_NET */
 
 /*
+ * SDIO/MMC Card Configuration
+ */
+#ifdef CONFIG_CMD_MMC
+#define CONFIG_MMC
+#define CONFIG_GENERIC_MMC
+#define CONFIG_MRVL_MMC
+#define CONFIG_SYS_MMC_BASE KW_SDIO_BASE
+#endif /* CONFIG_CMD_MMC */
+
+
+/*
  * File system
  */
 #define CONFIG_CMD_EXT2
-- 
1.7.10.4