[U-Boot] [PATCH V2] i2c: soft: Fix typo in CONFIG_SYS_I2C_SOFT_SPEED

[Marek Vasut]

In case only the CONFIG_SYS_I2C_SPEED is set in configuration file,
the CONFIG_SYS_I2C_SOFT_SPEED is defined as CONFIG_SYS_I2C_SPEED.
The CONFIG_SYS_I2C_SOFT_SPEED is then used throughout the driver.

Unfortunatelly, due to a typo in the driver, instead of defining
CONFIG_SYS_I2C_SOFT_SPEED, an CONFIG_SYS_SOFT_I2C_SPEED was defined
and therefore the driver failed to compile. The same applies for
CONFIG_SYS_I2C_SOFT_SLAVE , where the swap happens as well.

This patch fixes the issue.

Signed-off-by: Marek Vasut <marex at denx.de>
Cc: Heiko Schocher <hs at denx.de>
---
 drivers/i2c/soft_i2c.c       |    8 ++++----
 include/configs/blackstamp.h |    4 ++--
 2 files changed, 6 insertions(+), 6 deletions(-)

V2: Fix blackstamp board too

diff --git a/drivers/i2c/soft_i2c.c b/drivers/i2c/soft_i2c.c
index a2baec0..396fea8 100644
--- a/drivers/i2c/soft_i2c.c
+++ b/drivers/i2c/soft_i2c.c
@@ -105,11 +105,11 @@ DECLARE_GLOBAL_DATA_PTR;
 # endif
 #endif
 
-#if !defined(CONFIG_SYS_SOFT_I2C_SPEED)
-#define CONFIG_SYS_SOFT_I2C_SPEED CONFIG_SYS_I2C_SPEED
+#if !defined(CONFIG_SYS_I2C_SOFT_SPEED)
+#define CONFIG_SYS_I2C_SOFT_SPEED CONFIG_SYS_I2C_SPEED
 #endif
-#if !defined(CONFIG_SYS_SOFT_I2C_SLAVE)
-#define CONFIG_SYS_SOFT_I2C_SLAVE CONFIG_SYS_I2C_SLAVE
+#if !defined(CONFIG_SYS_I2C_SOFT_SLAVE)
+#define CONFIG_SYS_I2C_SOFT_SLAVE CONFIG_SYS_I2C_SLAVE
 #endif
 
 /*-----------------------------------------------------------------------
diff --git a/include/configs/blackstamp.h b/include/configs/blackstamp.h
index 7d82275..5b3aac7 100644
--- a/include/configs/blackstamp.h
+++ b/include/configs/blackstamp.h
@@ -206,8 +206,8 @@
 #ifdef CONFIG_SYS_I2C_SOFT
 #define CONFIG_SOFT_I2C_GPIO_SCL GPIO_PF9
 #define CONFIG_SOFT_I2C_GPIO_SDA GPIO_PF8
-#define CONFIG_SYS_SOFT_I2C_SPEED	50000
-#define CONFIG_SYS_SOFT_I2C_SLAVE	0xFE
+#define CONFIG_SYS_I2C_SOFT_SPEED	50000
+#define CONFIG_SYS_I2C_SOFT_SLAVE	0xFE
 #endif
 
 /*
-- 
1.7.10.4