[U-Boot] [PATCH V2] i2c: soft: Fix typo in CONFIG_SYS_I2C_SOFT_SPEED

Heiko Schocher hs at denx.de
Sat Aug 3 06:05:45 CEST 2013


Hello Marek,

Am 01.08.2013 12:32, schrieb Marek Vasut:
> In case only the CONFIG_SYS_I2C_SPEED is set in configuration file,
> the CONFIG_SYS_I2C_SOFT_SPEED is defined as CONFIG_SYS_I2C_SPEED.
> The CONFIG_SYS_I2C_SOFT_SPEED is then used throughout the driver.
>
> Unfortunatelly, due to a typo in the driver, instead of defining
> CONFIG_SYS_I2C_SOFT_SPEED, an CONFIG_SYS_SOFT_I2C_SPEED was defined
> and therefore the driver failed to compile. The same applies for
> CONFIG_SYS_I2C_SOFT_SLAVE , where the swap happens as well.
>
> This patch fixes the issue.
>
> Signed-off-by: Marek Vasut<marex at denx.de>
> Cc: Heiko Schocher<hs at denx.de>
> ---
>   drivers/i2c/soft_i2c.c       |    8 ++++----
>   include/configs/blackstamp.h |    4 ++--
>   2 files changed, 6 insertions(+), 6 deletions(-)
>
> V2: Fix blackstamp board too

Thanks! Applied to u-boot-i2c master

bye,
Heiko
-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany


More information about the U-Boot mailing list