[U-Boot] [PATCH 08/10] TI:omap5: Convert to ti_armv7_common.h

Tom Rini trini at ti.com
Fri Aug 2 22:26:13 CEST 2013


Update omap5_common.h to use ti_armv7_common.h, and in turn update
dra7xx_evm.h and omap5_uevm.h slightly.  The biggest changes here are
that IP blocks which exist on the platform, and had clocks enabled,
now have the drivers being built as well.

Signed-off-by: Tom Rini <trini at ti.com>
---
 include/configs/dra7xx_evm.h   |   11 +--
 include/configs/omap5_common.h |  188 +++++-----------------------------------
 include/configs/omap5_uevm.h   |    8 +-
 3 files changed, 31 insertions(+), 176 deletions(-)

diff --git a/include/configs/dra7xx_evm.h b/include/configs/dra7xx_evm.h
index 51be73d..58786ff 100644
--- a/include/configs/dra7xx_evm.h
+++ b/include/configs/dra7xx_evm.h
@@ -12,21 +12,18 @@
 #ifndef __CONFIG_DRA7XX_EVM_H
 #define __CONFIG_DRA7XX_EVM_H
 
-/* High Level Configuration Options */
-#define CONFIG_DRA7XX		/* in a TI DRA7XX core */
-#define CONFIG_ENV_IS_NOWHERE		/* For now. */
-
-#include <configs/omap5_common.h>
+#define CONFIG_DRA7XX
 
-#define CONFIG_SYS_PROMPT		"DRA752 EVM # "
+#define CONFIG_ENV_IS_NOWHERE		/* For now. */
 
+#define CONSOLEDEV			"ttyO0"
 #define CONFIG_CONS_INDEX		1
 #define CONFIG_SYS_NS16550_COM1		UART1_BASE
 #define CONFIG_BAUDRATE			115200
 
 #define CONFIG_SYS_OMAP_ABE_SYSCK
 
-#define CONSOLEDEV		"ttyO0"
+#include <configs/omap5_common.h>
 
 /* CPSW Ethernet */
 #define CONFIG_CMD_NET
diff --git a/include/configs/omap5_common.h b/include/configs/omap5_common.h
index 7dd56cf..469a081 100644
--- a/include/configs/omap5_common.h
+++ b/include/configs/omap5_common.h
@@ -14,106 +14,51 @@
 #ifndef __CONFIG_OMAP5_COMMON_H
 #define __CONFIG_OMAP5_COMMON_H
 
-/*
- * High Level Configuration Options
- */
-#define CONFIG_OMAP	/* in a TI OMAP core */
-#define CONFIG_OMAP54XX	/* which is a 54XX */
-#define CONFIG_OMAP_GPIO
-
-/* Get CPU defs */
-#include <asm/arch/cpu.h>
-#include <asm/arch/omap.h>
-
-/* Display CPU and Board Info */
+#define CONFIG_OMAP54XX
 #define CONFIG_DISPLAY_CPUINFO
 #define CONFIG_DISPLAY_BOARDINFO
-
 #define CONFIG_MISC_INIT_R
+#define CONFIG_ARCH_CPU_INIT
 
-#define CONFIG_OF_LIBFDT
-#define CONFIG_CMD_BOOTZ
+#define CONFIG_SYS_CACHELINE_SIZE	64
 
-#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */
-#define CONFIG_SETUP_MEMORY_TAGS
-#define CONFIG_INITRD_TAG
+/* Use General purpose timer 1 */
+#define CONFIG_SYS_TIMERBASE		GPT2_BASE
+
+#define CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS
+
+/* Defines for SDRAM init */
+#ifndef CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS
+#define CONFIG_SYS_AUTOMATIC_SDRAM_DETECTION
+#define CONFIG_SYS_DEFAULT_LPDDR2_TIMINGS
+#endif
+
+#ifndef CONFIG_SPL_BUILD
+#define CONFIG_PALMAS_POWER
+#endif
+
+#include <asm/arch/cpu.h>
+#include <asm/arch/omap.h>
 
-/*
- * Size of malloc() pool
- * Total Size Environment - 128k
- * Malloc - add 256k
- */
 #define CONFIG_ENV_SIZE			(128 << 10)
-#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + (256 << 10))
-/* Vector Base */
-#define CONFIG_SYS_CA9_VECTOR_BASE	SRAM_ROM_VECT_BASE
 
-/*
- * Hardware drivers
- */
+#include <configs/ti_armv7_common.h>
 
 /*
- * serial port - NS16550 compatible
+ * Hardware drivers
  */
-#define V_NS16550_CLK			48000000
-
 #define CONFIG_SYS_NS16550
 #define CONFIG_SYS_NS16550_SERIAL
 #define CONFIG_SYS_NS16550_REG_SIZE	(-4)
-#define CONFIG_SYS_NS16550_CLK		V_NS16550_CLK
-
-/* CPU */
-#define CONFIG_ARCH_CPU_INIT
-
-/* I2C  */
-#define CONFIG_HARD_I2C
-#define CONFIG_SYS_I2C_SPEED		100000
-#define CONFIG_SYS_I2C_SLAVE		1
-#define CONFIG_DRIVER_OMAP34XX_I2C
-#define CONFIG_I2C_MULTI_BUS
-
-/* MMC */
-#define CONFIG_GENERIC_MMC
-#define CONFIG_MMC
-#define CONFIG_OMAP_HSMMC
-#define CONFIG_DOS_PARTITION
-
-#define CONFIG_SYS_CONSOLE_IS_IN_ENV
-
-/* Flash */
-#define CONFIG_SYS_NO_FLASH
-
-/* Cache */
-#define CONFIG_SYS_CACHELINE_SIZE	64
-#define CONFIG_SYS_CACHELINE_SHIFT	6
+#define CONFIG_SYS_NS16550_CLK		48000000
 
-/* commands to include */
-#include <config_cmd_default.h>
-
-/* Enabled commands */
-#define CONFIG_CMD_EXT2		/* EXT2 Support                 */
-#define CONFIG_CMD_FAT		/* FAT support                  */
-#define CONFIG_CMD_I2C		/* I2C serial bus support	*/
-#define CONFIG_CMD_MMC		/* MMC support                  */
-
-/* Disabled commands */
+/* Per-SoC commands */
 #undef CONFIG_CMD_NET
 #undef CONFIG_CMD_NFS
-#undef CONFIG_CMD_FPGA		/* FPGA configuration Support   */
-#undef CONFIG_CMD_IMLS		/* List all found images        */
 
 /*
  * Environment setup
  */
-
-#define CONFIG_BOOTDELAY	3
-#define CONFIG_ENV_VARS_UBOOT_CONFIG
-#define CONFIG_CMD_FS_GENERIC
-#define CONFIG_CMD_EXT2
-#define CONFIG_CMD_EXT4
-
-#define CONFIG_ENV_OVERWRITE
-
 #ifndef PARTS_DEFAULT
 #define PARTS_DEFAULT
 #endif
@@ -178,96 +123,11 @@
 		"fi; " \
 	"fi"
 
-#define CONFIG_AUTO_COMPLETE		1
-
-/*
- * Miscellaneous configurable options
- */
-
-#define CONFIG_SYS_LONGHELP	/* undef to save memory */
-#define CONFIG_SYS_HUSH_PARSER	/* use "hush" command parser */
-#define CONFIG_SYS_CBSIZE		256
-/* Print Buffer Size */
-#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + \
-					sizeof(CONFIG_SYS_PROMPT) + 16)
-#define CONFIG_SYS_MAXARGS		16
-/* Boot Argument Buffer Size */
-#define CONFIG_SYS_BARGSIZE		(CONFIG_SYS_CBSIZE)
-
-/*
- * memtest setup
- */
-#define CONFIG_SYS_MEMTEST_START	0x80000000
-#define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_MEMTEST_START + (32 << 20))
-
-/* Default load address */
-#define CONFIG_SYS_LOAD_ADDR		0x80000000
-
-/* Use General purpose timer 1 */
-#define CONFIG_SYS_TIMERBASE		GPT2_BASE
-#define CONFIG_SYS_PTV			2	/* Divisor: 2^(PTV+1) => 8 */
-#define CONFIG_SYS_HZ			1000
-
-/*
- * SDRAM Memory Map
- * Even though we use two CS all the memory
- * is mapped to one contiguous block
- */
-#define CONFIG_NR_DRAM_BANKS	1
-
-#define CONFIG_SYS_SDRAM_BASE		0x80000000
-#define CONFIG_SYS_INIT_SP_ADDR         (NON_SECURE_SRAM_END - \
-					 GENERATED_GBL_DATA_SIZE)
-
-#define CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS
-
-/* Defines for SDRAM init */
-#ifndef CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS
-#define CONFIG_SYS_AUTOMATIC_SDRAM_DETECTION
-#define CONFIG_SYS_DEFAULT_LPDDR2_TIMINGS
-#endif
-
-#ifndef CONFIG_SPL_BUILD
-#define CONFIG_PALMAS_POWER
-#endif
 
 /* Defines for SPL */
-#define CONFIG_SPL
-#define CONFIG_SPL_FRAMEWORK
 #define CONFIG_SPL_TEXT_BASE		0x40300350
 #define CONFIG_SPL_MAX_SIZE		0x19000	/* 100K */
-#define CONFIG_SPL_STACK		CONFIG_SYS_INIT_SP_ADDR
 #define CONFIG_SPL_DISPLAY_PRINT
-
-#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR	0x300 /* address 0x60000 */
-#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS	0x200 /* 256 KB */
-#define CONFIG_SYS_MMC_SD_FAT_BOOT_PARTITION	1
-#define CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME	"u-boot.img"
-
-#define CONFIG_SPL_LIBCOMMON_SUPPORT
-#define CONFIG_SPL_LIBDISK_SUPPORT
-#define CONFIG_SPL_I2C_SUPPORT
-#define CONFIG_SPL_MMC_SUPPORT
-#define CONFIG_SPL_FAT_SUPPORT
-#define CONFIG_SPL_LIBGENERIC_SUPPORT
-#define CONFIG_SPL_SERIAL_SUPPORT
 #define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/omap-common/u-boot-spl.lds"
 
-/*
- * 64 bytes before this address should be set aside for u-boot.img's
- * header. That is 80E7FFC0--0x80E80000 should not be used for any
- * other needs.
- */
-#define CONFIG_SYS_TEXT_BASE		0x80E80000
-
-/*
- * BSS and malloc area 64MB into memory to allow enough
- * space for the kernel at the beginning of memory
- */
-#define CONFIG_SPL_BSS_START_ADDR	0x84000000
-#define CONFIG_SPL_BSS_MAX_SIZE		0x100000	/* 1 MB */
-#define CONFIG_SYS_SPL_MALLOC_START	0x84100000
-#define CONFIG_SYS_SPL_MALLOC_SIZE	0x100000	/* 1 MB */
-#define CONFIG_SPL_GPIO_SUPPORT
-
 #endif /* __CONFIG_OMAP5_COMMON_H */
diff --git a/include/configs/omap5_uevm.h b/include/configs/omap5_uevm.h
index 47568e9..d10c2b5 100644
--- a/include/configs/omap5_uevm.h
+++ b/include/configs/omap5_uevm.h
@@ -17,8 +17,6 @@
 	"uuid_disk=${uuid_gpt_disk};" \
 	"name=rootfs,start=2MiB,size=-,uuid=${uuid_gpt_rootfs}"
 
-#include <configs/omap5_common.h>
-
 #define CONFIG_CONS_INDEX		3
 #define CONFIG_SYS_NS16550_COM3		UART3_BASE
 #define CONFIG_BAUDRATE			115200
@@ -42,9 +40,9 @@
 #define CONFIG_SYS_I2C_TCA642X_BUS_NUM 4
 #define CONFIG_SYS_I2C_TCA642X_ADDR 0x22
 
-#define CONFIG_SYS_PROMPT		"OMAP5432 uEVM # "
-
 #define CONSOLEDEV		"ttyO2"
-
 #define CONFIG_OMAP_PLATFORM_RESET_TIME_MAX_USEC	16296
+
+#include <configs/omap5_common.h>
+
 #endif /* __CONFIG_OMAP5_EVM_H */
-- 
1.7.9.5



More information about the U-Boot mailing list