[U-Boot] [PATCH 08/10] TI:omap5: Convert to ti_armv7_common.h
Dan Murphy
dmurphy at ti.com
Tue Aug 6 20:37:34 CEST 2013
On 08/02/2013 03:26 PM, Tom Rini wrote:
> Update omap5_common.h to use ti_armv7_common.h, and in turn update
> dra7xx_evm.h and omap5_uevm.h slightly. The biggest changes here are
The commit headline does not indicate anything about dra7xx. So dra7xx dev's might over look this change.
> that IP blocks which exist on the platform, and had clocks enabled,
> now have the drivers being built as well.
>
> Signed-off-by: Tom Rini <trini at ti.com>
> ---
> include/configs/dra7xx_evm.h | 11 +--
> include/configs/omap5_common.h | 188 +++++-----------------------------------
> include/configs/omap5_uevm.h | 8 +-
> 3 files changed, 31 insertions(+), 176 deletions(-)
>
> diff --git a/include/configs/dra7xx_evm.h b/include/configs/dra7xx_evm.h
> index 51be73d..58786ff 100644
> --- a/include/configs/dra7xx_evm.h
> +++ b/include/configs/dra7xx_evm.h
> @@ -12,21 +12,18 @@
> #ifndef __CONFIG_DRA7XX_EVM_H
> #define __CONFIG_DRA7XX_EVM_H
>
> -/* High Level Configuration Options */
> -#define CONFIG_DRA7XX /* in a TI DRA7XX core */
> -#define CONFIG_ENV_IS_NOWHERE /* For now. */
> -
> -#include <configs/omap5_common.h>
> +#define CONFIG_DRA7XX
>
> -#define CONFIG_SYS_PROMPT "DRA752 EVM # "
> +#define CONFIG_ENV_IS_NOWHERE /* For now. */
>
> +#define CONSOLEDEV "ttyO0"
> #define CONFIG_CONS_INDEX 1
> #define CONFIG_SYS_NS16550_COM1 UART1_BASE
> #define CONFIG_BAUDRATE 115200
>
> #define CONFIG_SYS_OMAP_ABE_SYSCK
>
> -#define CONSOLEDEV "ttyO0"
> +#include <configs/omap5_common.h>
>
> /* CPSW Ethernet */
> #define CONFIG_CMD_NET
> diff --git a/include/configs/omap5_common.h b/include/configs/omap5_common.h
> index 7dd56cf..469a081 100644
> --- a/include/configs/omap5_common.h
> +++ b/include/configs/omap5_common.h
> @@ -14,106 +14,51 @@
> #ifndef __CONFIG_OMAP5_COMMON_H
> #define __CONFIG_OMAP5_COMMON_H
>
> -/*
> - * High Level Configuration Options
> - */
> -#define CONFIG_OMAP /* in a TI OMAP core */
> -#define CONFIG_OMAP54XX /* which is a 54XX */
> -#define CONFIG_OMAP_GPIO
> -
> -/* Get CPU defs */
> -#include <asm/arch/cpu.h>
> -#include <asm/arch/omap.h>
> -
> -/* Display CPU and Board Info */
> +#define CONFIG_OMAP54XX
> #define CONFIG_DISPLAY_CPUINFO
> #define CONFIG_DISPLAY_BOARDINFO
> -
> #define CONFIG_MISC_INIT_R
> +#define CONFIG_ARCH_CPU_INIT
>
> -#define CONFIG_OF_LIBFDT
> -#define CONFIG_CMD_BOOTZ
> +#define CONFIG_SYS_CACHELINE_SIZE 64
>
> -#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */
> -#define CONFIG_SETUP_MEMORY_TAGS
> -#define CONFIG_INITRD_TAG
> +/* Use General purpose timer 1 */
> +#define CONFIG_SYS_TIMERBASE GPT2_BASE
> +
> +#define CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS
> +
> +/* Defines for SDRAM init */
> +#ifndef CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS
> +#define CONFIG_SYS_AUTOMATIC_SDRAM_DETECTION
> +#define CONFIG_SYS_DEFAULT_LPDDR2_TIMINGS
> +#endif
> +
> +#ifndef CONFIG_SPL_BUILD
> +#define CONFIG_PALMAS_POWER
> +#endif
> +
> +#include <asm/arch/cpu.h>
> +#include <asm/arch/omap.h>
>
> -/*
> - * Size of malloc() pool
> - * Total Size Environment - 128k
> - * Malloc - add 256k
> - */
> #define CONFIG_ENV_SIZE (128 << 10)
> -#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (256 << 10))
> -/* Vector Base */
> -#define CONFIG_SYS_CA9_VECTOR_BASE SRAM_ROM_VECT_BASE
>
> -/*
> - * Hardware drivers
> - */
> +#include <configs/ti_armv7_common.h>
>
> /*
> - * serial port - NS16550 compatible
> + * Hardware drivers
> */
> -#define V_NS16550_CLK 48000000
> -
> #define CONFIG_SYS_NS16550
> #define CONFIG_SYS_NS16550_SERIAL
> #define CONFIG_SYS_NS16550_REG_SIZE (-4)
> -#define CONFIG_SYS_NS16550_CLK V_NS16550_CLK
> -
> -/* CPU */
> -#define CONFIG_ARCH_CPU_INIT
> -
> -/* I2C */
> -#define CONFIG_HARD_I2C
> -#define CONFIG_SYS_I2C_SPEED 100000
> -#define CONFIG_SYS_I2C_SLAVE 1
> -#define CONFIG_DRIVER_OMAP34XX_I2C
> -#define CONFIG_I2C_MULTI_BUS
> -
> -/* MMC */
> -#define CONFIG_GENERIC_MMC
> -#define CONFIG_MMC
> -#define CONFIG_OMAP_HSMMC
> -#define CONFIG_DOS_PARTITION
> -
> -#define CONFIG_SYS_CONSOLE_IS_IN_ENV
> -
> -/* Flash */
> -#define CONFIG_SYS_NO_FLASH
> -
> -/* Cache */
> -#define CONFIG_SYS_CACHELINE_SIZE 64
> -#define CONFIG_SYS_CACHELINE_SHIFT 6
> +#define CONFIG_SYS_NS16550_CLK 48000000
>
> -/* commands to include */
> -#include <config_cmd_default.h>
> -
> -/* Enabled commands */
> -#define CONFIG_CMD_EXT2 /* EXT2 Support */
> -#define CONFIG_CMD_FAT /* FAT support */
> -#define CONFIG_CMD_I2C /* I2C serial bus support */
> -#define CONFIG_CMD_MMC /* MMC support */
> -
> -/* Disabled commands */
> +/* Per-SoC commands */
> #undef CONFIG_CMD_NET
> #undef CONFIG_CMD_NFS
> -#undef CONFIG_CMD_FPGA /* FPGA configuration Support */
> -#undef CONFIG_CMD_IMLS /* List all found images */
>
> /*
> * Environment setup
> */
> -
> -#define CONFIG_BOOTDELAY 3
> -#define CONFIG_ENV_VARS_UBOOT_CONFIG
> -#define CONFIG_CMD_FS_GENERIC
> -#define CONFIG_CMD_EXT2
> -#define CONFIG_CMD_EXT4
> -
> -#define CONFIG_ENV_OVERWRITE
> -
> #ifndef PARTS_DEFAULT
> #define PARTS_DEFAULT
> #endif
> @@ -178,96 +123,11 @@
> "fi; " \
> "fi"
>
> -#define CONFIG_AUTO_COMPLETE 1
> -
> -/*
> - * Miscellaneous configurable options
> - */
> -
> -#define CONFIG_SYS_LONGHELP /* undef to save memory */
> -#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */
> -#define CONFIG_SYS_CBSIZE 256
> -/* Print Buffer Size */
> -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
> - sizeof(CONFIG_SYS_PROMPT) + 16)
> -#define CONFIG_SYS_MAXARGS 16
> -/* Boot Argument Buffer Size */
> -#define CONFIG_SYS_BARGSIZE (CONFIG_SYS_CBSIZE)
> -
> -/*
> - * memtest setup
> - */
> -#define CONFIG_SYS_MEMTEST_START 0x80000000
> -#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + (32 << 20))
> -
> -/* Default load address */
> -#define CONFIG_SYS_LOAD_ADDR 0x80000000
> -
> -/* Use General purpose timer 1 */
> -#define CONFIG_SYS_TIMERBASE GPT2_BASE
> -#define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */
> -#define CONFIG_SYS_HZ 1000
> -
> -/*
> - * SDRAM Memory Map
> - * Even though we use two CS all the memory
> - * is mapped to one contiguous block
> - */
> -#define CONFIG_NR_DRAM_BANKS 1
> -
> -#define CONFIG_SYS_SDRAM_BASE 0x80000000
> -#define CONFIG_SYS_INIT_SP_ADDR (NON_SECURE_SRAM_END - \
> - GENERATED_GBL_DATA_SIZE)
> -
> -#define CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS
> -
> -/* Defines for SDRAM init */
> -#ifndef CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS
> -#define CONFIG_SYS_AUTOMATIC_SDRAM_DETECTION
> -#define CONFIG_SYS_DEFAULT_LPDDR2_TIMINGS
> -#endif
> -
> -#ifndef CONFIG_SPL_BUILD
> -#define CONFIG_PALMAS_POWER
> -#endif
>
> /* Defines for SPL */
> -#define CONFIG_SPL
> -#define CONFIG_SPL_FRAMEWORK
> #define CONFIG_SPL_TEXT_BASE 0x40300350
> #define CONFIG_SPL_MAX_SIZE 0x19000 /* 100K */
> -#define CONFIG_SPL_STACK CONFIG_SYS_INIT_SP_ADDR
> #define CONFIG_SPL_DISPLAY_PRINT
> -
> -#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */
> -#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x200 /* 256 KB */
> -#define CONFIG_SYS_MMC_SD_FAT_BOOT_PARTITION 1
> -#define CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME "u-boot.img"
> -
> -#define CONFIG_SPL_LIBCOMMON_SUPPORT
> -#define CONFIG_SPL_LIBDISK_SUPPORT
> -#define CONFIG_SPL_I2C_SUPPORT
> -#define CONFIG_SPL_MMC_SUPPORT
> -#define CONFIG_SPL_FAT_SUPPORT
> -#define CONFIG_SPL_LIBGENERIC_SUPPORT
> -#define CONFIG_SPL_SERIAL_SUPPORT
> #define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/omap-common/u-boot-spl.lds"
>
> -/*
> - * 64 bytes before this address should be set aside for u-boot.img's
> - * header. That is 80E7FFC0--0x80E80000 should not be used for any
> - * other needs.
> - */
> -#define CONFIG_SYS_TEXT_BASE 0x80E80000
> -
> -/*
> - * BSS and malloc area 64MB into memory to allow enough
> - * space for the kernel at the beginning of memory
> - */
> -#define CONFIG_SPL_BSS_START_ADDR 0x84000000
> -#define CONFIG_SPL_BSS_MAX_SIZE 0x100000 /* 1 MB */
> -#define CONFIG_SYS_SPL_MALLOC_START 0x84100000
> -#define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000 /* 1 MB */
> -#define CONFIG_SPL_GPIO_SUPPORT
> -
> #endif /* __CONFIG_OMAP5_COMMON_H */
> diff --git a/include/configs/omap5_uevm.h b/include/configs/omap5_uevm.h
> index 47568e9..d10c2b5 100644
> --- a/include/configs/omap5_uevm.h
> +++ b/include/configs/omap5_uevm.h
> @@ -17,8 +17,6 @@
> "uuid_disk=${uuid_gpt_disk};" \
> "name=rootfs,start=2MiB,size=-,uuid=${uuid_gpt_rootfs}"
>
> -#include <configs/omap5_common.h>
> -
> #define CONFIG_CONS_INDEX 3
> #define CONFIG_SYS_NS16550_COM3 UART3_BASE
> #define CONFIG_BAUDRATE 115200
> @@ -42,9 +40,9 @@
> #define CONFIG_SYS_I2C_TCA642X_BUS_NUM 4
> #define CONFIG_SYS_I2C_TCA642X_ADDR 0x22
>
> -#define CONFIG_SYS_PROMPT "OMAP5432 uEVM # "
> -
> #define CONSOLEDEV "ttyO2"
> -
> #define CONFIG_OMAP_PLATFORM_RESET_TIME_MAX_USEC 16296
> +
> +#include <configs/omap5_common.h>
> +
> #endif /* __CONFIG_OMAP5_EVM_H */
Would it be better to split this into two patches? one for OMAP5 and one for dra7xx?
Dan
--
------------------
Dan Murphy
More information about the U-Boot
mailing list