[U-Boot] [PATCH v1 8/8] mpc85xx: introduce the kmp204x reference design support

[Valentin Longchamp]

On 08/20/2013 02:48 AM, Scott Wood wrote:
> On Mon, 2013-08-19 at 17:50 +0200, Valentin Longchamp wrote:
>> On 08/13/2013 11:38 PM, Scott Wood wrote:
>>> On Fri, 2013-07-26 at 12:02 +0200, Valentin Longchamp wrote:
>>>> This patch introduces the support for Keymile's kmp204x reference
>>>> design. This design is based on Freescale's P2040/P2041 SoC.
>>>>
>>>> The peripherals used by this design are:
>>>> - DDR3 RAM with SPD support
>>>> - SPI NOR Flash as boot medium
>>>> - NAND Flash
>>>> - 2 PCIe busses (hosts 1 and 3)
>>>> - 3 FMAN Ethernet devices (FMAN1 DTSEC1/2/5)
>>>> - 3 Local Bus windows, with one dedicated to the QRIO reset/power mgmt
>>>>   FPGA
>>>> - 2 HW I2C busses
>>>> - last but not least, the mandatory serial port
>>>>
>>>> The board/keymile/kmp204x code is mostly based on Freescale's P2041rdb
>>>> support and was changed according to our design (that means essentially
>>>> removing what is not present on the designs and a few adaptations).
>>>
>>> A lot of the copied files have had Freescale copyrights removed...  Also
>>> please try to factor shared code out rather than duplicate, where
>>> practical.
>>
>> Well, I had tried to come a first proposal that factored shared code but I was
>> advised to copy the code: [1]. For the copyrights I will fix it.
>>
>> [1]
>>
> 
> Did you mean to cite something here?
> 

Oops, yes sorry:
http://u-boot.10912.n7.nabble.com/RFC-PATCH-mpc85xx-move-generic-corenet-to-cpu-mpc85xxx-tt153910.html#none