[U-Boot] [PATCH v3 0/5] ARM: at91: atmel_nand: check ONFI ecc minimum requirement
Josh Wu
josh.wu at atmel.com
Thu Aug 22 12:07:22 CEST 2013
Hi, Andreas
I am wondering will you take this series in your git tree? Since this
patch is pending here for weeks.
Best Regards,
Josh Wu
On 7/3/2013 11:11 AM, Josh Wu wrote:
> In this patch series, first we make the nand driver can dynamic change sector
> size and ecc correct bits.
> Then we enable ONFI ecc parameters check.
>
> v2 --> v3: use dev_err/info(host->dev) instead of dev_err/info(NULL).
> use MTDDEBUG instead of pr_debug().
>
> v1 --> v2: Fixes according to Scoot Wood's suggestion
> - add a new patch which make all driver can use dev_err, dev_info, dev_dbg.
> - replace all printk to dev_err or dev_info.
> - fix pmecc data allocate error handler.
> - fix the pmecc ecc requirement selection, should use <= instead of use <.
>
> Josh Wu (5):
> ARM: at91: atmel_nand: pmecc driver will select the galois table by
> sector size
> ARM: at91: sama5d3: remove unused definition about PMECC alpha table
> offset
> linux/compat.h: move dev_err, dev_info and dev_dbg from usb driver to
> compat.h
> mtd: atmel_nand: alloc memory instead of use static array for pmecc
> data
> ARM: at91: atmel_nand: add code to check the ONFI parameter ECC
> requirement
>
> arch/arm/include/asm/arch-at91/at91sam9x5.h | 6 +
> arch/arm/include/asm/arch-at91/sama5d3.h | 2 -
> doc/README.atmel_pmecc | 14 --
> drivers/mtd/nand/atmel_nand.c | 197 +++++++++++++++++++++++++--
> drivers/usb/musb-new/linux-compat.h | 16 ---
> include/configs/at91sam9x5ek.h | 1 -
> include/configs/sama5d3xek.h | 1 -
> include/linux/compat.h | 8 ++
> 8 files changed, 201 insertions(+), 44 deletions(-)
>
More information about the U-Boot
mailing list