[U-Boot] [U-Boot,v4,7/7] arm: atmel: sama5d3: spl boot from fat fs SD card

[Andreas Bießmann]

Dear Bo Shen,

Bo Shen <voice.shen at atmel.com> writes:
>Enable Atmel sama5d3xek boart spl boot support, which can load u-boot
>from SD card with FAT file system.
>
>Signed-off-by: Bo Shen <voice.shen at atmel.com>
>
>---
>Changes in v4:
>  - Add comments to DDR refresh timing register.
>
>Changes in v3:
>  - Move plla and mck configure to spl.c file
>
>Changes in v2:
>  - Move spl related code to at91-common folder
>
> arch/arm/cpu/armv7/Makefile                  |    2 +-
> arch/arm/cpu/at91-common/Makefile            |    2 +-
> arch/arm/cpu/at91-common/spl.c               |   90 ++++++++++++++++++++++++++
> arch/arm/cpu/at91-common/u-boot-spl.lds      |   50 ++++++++++++++
> arch/arm/include/asm/arch-at91/at91_common.h |    4 ++
> arch/arm/include/asm/arch-at91/spl.h         |   20 ++++++
> board/atmel/sama5d3xek/sama5d3xek.c          |   85 ++++++++++++++++++++++++
> include/configs/sama5d3xek.h                 |   34 ++++++++++
> 8 files changed, 285 insertions(+), 2 deletions(-)
> create mode 100644 arch/arm/cpu/at91-common/spl.c
> create mode 100644 arch/arm/cpu/at91-common/u-boot-spl.lds
> create mode 100644 arch/arm/include/asm/arch-at91/spl.h

applied to u-boot-atmel/master, thanks!

Best regards,
Andreas Bießmann