December 2013 Archives by date
Starting: Sun Dec 1 00:04:06 CET 2013
Ending: Tue Dec 31 21:53:28 CET 2013
Messages: 1797
- [U-Boot] [PATCH] serial: lpc32xx: send CR before LF
Marek Vasut
- [U-Boot] [PATCH] serial: lpc32xx: send CR before LF
Marek Vasut
- [U-Boot] [PATCH] serial: lpc32xx: send CR before LF
Vladimir Zapolskiy
- [U-Boot] [PATCH V2] arm: omap3: Enable clocks for peripherals only if they are used
Igor Grinberg
- [U-Boot] [PATCH] serial: lpc32xx: send CR before LF
Marek Vasut
- [U-Boot] Pull request for u-boot-marvell.git
Luka Perkov
- [U-Boot] [RFC PATCH] kgdb: configs: remove obsolete CONFIG_KGDB_SER_INDEX
Vladimir Zapolskiy
- [U-Boot] [PATCH v2 0/4] Add dumpimage tool to extract files from U-Boot images
Simon Glass
- [U-Boot] [PATCH v2 1/4] mkimage: added 'static' specifier to match function's prototype.
Simon Glass
- [U-Boot] [PATCH v2 2/4] tools: moved code common to all image tools to a separated module.
Simon Glass
- [U-Boot] [PATCH v2 3/4] Add dumpimage, a tool to extract data from U-Boot images
Simon Glass
- [U-Boot] [PATCH v2 4/4] sandbox: dumpimage: Test dumpimage
Simon Glass
- [U-Boot] [U-Boot,v4,1/7] arm: atmel: sama5d3: correct the ID for DBGU and PIT
Andreas Bießmann
- [U-Boot] [U-Boot,v4,2/7] arm: at91: pm9261: remove undefined bit in mckr
Andreas Bießmann
- [U-Boot] [U-Boot,v4,3/7] arm: atmel: sama5d3: correct the error define of DIV
Andreas Bießmann
- [U-Boot] [U-Boot,v4,4/7] arm: atmel: sama5d3: the offset of MULA is 18
Andreas Bießmann
- [U-Boot] [U-Boot,v4,5/7] arm: atmel: sama5d3: early enable PIO peripherals
Andreas Bießmann
- [U-Boot] [U-Boot,v4,6/7] arm: atmel: add ddr2 initialization function
Andreas Bießmann
- [U-Boot] [U-Boot,v4,7/7] arm: atmel: sama5d3: spl boot from fat fs SD card
Andreas Bießmann
- [U-Boot] [U-Boot,v2] arm926ejs, at91: add common phy_reset function
Andreas Bießmann
- [U-Boot] arm: atmel: sam9m10g45ek: let CONFIG_SYS_NO_FLASH at proper position
Andreas Bießmann
- [U-Boot] arm: atmel: eb_cpux9k2: config clean up
Andreas Bießmann
- [U-Boot] [PULL] u-boot-atmel/master -> u-boot-arm/master
Andreas Bießmann
- [U-Boot] [PATCH] alsa-lib: dlmisc: Add a fake dl lib head file when dl lib is not supported by the toolchain.
Sonic Zhang
- [U-Boot] [PATCH] net/fman: add ft_fixup_xgec to support 3rd and 4th 10GEC
Shengzhou Liu
- [U-Boot] [PATCH] trats: usb: Add usb_cable_connected() function
Minkyu Kang
- [U-Boot] [PATCH V4 1/2] driver:usb:s3c_udc: add support for Exynos4x12
Minkyu Kang
- [U-Boot] [PATCH V4 2/2] trats2: enable ums support on Trats2
Minkyu Kang
- [U-Boot] [PATCH v3 0/4] i2c: fti2c010: bug fix & new driver model
Kuo-Jung Su
- [U-Boot] [PATCH v3 1/4] i2c: fti2c010: cosmetic: coding style cleanup
Kuo-Jung Su
- [U-Boot] [PATCH 0/3] arm: atmel: sama5d3: add spi and nand spl boot support
Bo Shen
- [U-Boot] [PATCH 1/3] arm: atmel: sama5d3: add spi spl boot support
Bo Shen
- [U-Boot] [PATCH 2/3] mtd: nand: atmel: prepare for nand spl boot support
Bo Shen
- [U-Boot] [PATCH 3/3] arm: atmel: sama5d3: add nand spl boot support
Bo Shen
- [U-Boot] [PATCH 1/2] spi: bfin_spi: Remove unnecessary test for bus and pins[bus]
Scott Jiang
- [U-Boot] [PATCH 2/2] spi: bfin_spi6xx: Remove unnecessary test for bus and pins[bus]
Scott Jiang
- [U-Boot] [PATCH V2 10/14] ARM: AM43xx: clocks: Update DPLL details for EPOS EVM
Lokesh Vutla
- [U-Boot] [PATCH] powerpc/c29xpcie: 8k page size NAND boot support base on TPL/SPL
Po Liu
- [U-Boot] [PATCH V2 13/14] ARM: AM43xx: GP_EVM: Add support for DDR3
Lokesh Vutla
- [U-Boot] [PATCH 1/2] blackfin: Do not generate unused header bootrom-asm-offsets.h
Sonic Zhang
- [U-Boot] [PATCH] arm: exynos: fix set_mmc_clk for exynos4x12
Jaehoon Chung
- [U-Boot] [PATCH 1/3] esdhc: Workaround for card can't be detected on T4240QDS
Haijun Zhang
- [U-Boot] [PATCH 2/3] esdhc: Detecting 8 bit width before mmc initialization
Haijun Zhang
- [U-Boot] [PATCH 3/3] eSDHC: Calculate envaddr accroding to the address format
Haijun Zhang
- [U-Boot] [PATCH 1/4] at91: add new gpio pin definitions
Bo Shen
- [U-Boot] [PATCH v2] dwmmc: make driver usable for non-exynos platforms
Rajeshwari Birje
- [U-Boot] [PATCH v2] dwmmc: make driver usable for non-exynos platforms
Jaehoon Chung
- [U-Boot] [PATCH v2] Makefile: Do not create empty autoconf.mk on error
Masahiro Yamada
- [U-Boot] why u-boot relocate it self to RAM from flash?
tejas patel
- [U-Boot] [PATCH] arm: exynos: fix the align for exynos4_power structure
Minkyu Kang
- [U-Boot] [U-Boot v2] [PATCH] rsa: add a more flexible way to support different hash algorithms (e.g. sha256)
Heiko Schocher
- [U-Boot] [PATCH] Makefile: Do not create empty autoconf.mk on error
Masahiro Yamada
- [U-Boot] [PATCH v3 0/2] arm, at91: support for the taurus, axm and corvus board
Heiko Schocher
- [U-Boot] [PATCH v3 1/2] arm, at91: add Siemens board taurus and axm
Heiko Schocher
- [U-Boot] [PATCH v3 2/2] arm, at91: add siemens corvus board
Heiko Schocher
- [U-Boot] Why u-boot relocate from flash to RAM
tvpatel12
- [U-Boot] [PATCH 3/4] at91: nand: switch atmel_nand to generic GPIO API
esw at bus-elektronik.de
- [U-Boot] [PATCH V2] arm: omap: i2c: don't zero cnt in i2c_write
Andreas Naumann
- [U-Boot] [PATCH v3 0/4] i2c: fti2c010: bug fix & new driver model
Heiko Schocher
- [U-Boot] [PATCH V2] trats2: enable dfu and thor protocol for Tizen download
Minkyu Kang
- [U-Boot] [PATCH v3 0/4] i2c: fti2c010: bug fix & new driver model
Kuo-Jung Su
- [U-Boot] [PATCH v3 1/4] i2c: fti2c010: cosmetic: coding style cleanup
Kuo-Jung Su
- [U-Boot] [PATCH v3 2/4] i2c: fti2c010: migrate to new i2c model
Kuo-Jung Su
- [U-Boot] [PATCH v3 3/4] i2c: fti2c010: serial out r/w address in MSB order
Kuo-Jung Su
- [U-Boot] [PATCH v3 4/4] cmd_eeprom: bug fix for i2c read/write
Kuo-Jung Su
- [U-Boot] [PATCH v3 0/4] i2c: fti2c010: bug fix & new driver model
Kuo-Jung Su
- [U-Boot] [PATCH v6] spi: Add support SH Quad SPI driver
Nobuhiro Iwamatsu
- [U-Boot] [PATCH v3 0/4] i2c: fti2c010: bug fix & new driver model
Heiko Schocher
- [U-Boot] [PATCH V3] exynos: spl: Add a custom spi copy function
Minkyu Kang
- [U-Boot] [PATCH] mmc: dw_mmc: remove the exynos specific code in dw-mmc.c
Minkyu Kang
- [U-Boot] [PATCH 0/2] Add usb eth support
Chander Kashyap
- [U-Boot] Compiling a debug version of u-boot on panda board
Vikram Singh Shekhawat
- [U-Boot] Zynq serial - pull request
Michal Simek
- [U-Boot] [PATCH v2] dwmmc: make driver usable for non-exynos platforms
Alexey Brodkin
- [U-Boot] [PATCH v3 4/4] cmd_eeprom: bug fix for i2c read/write
Alexey Brodkin
- [U-Boot] [PATCH 0/9 V9] EXYNOS5420: Add SMDK5420 board support
Rajeshwari S Shinde
- [U-Boot] [PATCH 1/9 V9] EXYNOS5: Create a common board file
Rajeshwari S Shinde
- [U-Boot] [PATCH 2/9 V9] Exynos5420: Add base addresses for 5420
Rajeshwari S Shinde
- [U-Boot] [PATCH 3/9 V9] Exynos5420: Add clock initialization for 5420
Rajeshwari S Shinde
- [U-Boot] [PATCH 4/9 V9] Exynos5420: Add DDR3 initialization for 5420
Rajeshwari S Shinde
- [U-Boot] [PATCH 5/9 V9] Exynos5420: Add support for 5420 in pinmux and gpio
Rajeshwari S Shinde
- [U-Boot] [PATCH 6/9 V9] Exynos5420: Add base patch for SMDK5420
Rajeshwari S Shinde
- [U-Boot] [PATCH 7/9 V9] DTS: Add dts support for SMDK5420
Rajeshwari S Shinde
- [U-Boot] [PATCH 8/9 V9] Config: Add initial config for SMDK5420
Rajeshwari S Shinde
- [U-Boot] [PATCH 9/9 V9] SPL: EXYNOS: Prepare for variable size SPL support
Rajeshwari S Shinde
- [U-Boot] [PATCH V2] arm: omap: i2c: don't zero cnt in i2c_write
Thomas Petazzoni
- [U-Boot] [PATCH v2] trats: usb: Add usb_cable_connected() function
Przemyslaw Marczak
- [U-Boot] Compiling a debug version of u-boot on panda board
Lokesh Vutla
- [U-Boot] [PATCH V3] exynos: spl: Add a custom spi copy function
Rajeshwari Birje
- [U-Boot] [PATCH 0/3] OMAP USB host fixes for Beagle & Panda
Roger Quadros
- [U-Boot] [PATCH 1/3] usb: ehci-omap: Reset the USB Host OMAP module
Roger Quadros
- [U-Boot] [PATCH 2/3] omap3_beagle: Don't use ulpi_reset
Roger Quadros
- [U-Boot] [PATCH 3/3] omap4_panda: Don't use ulpi_reset
Roger Quadros
- [U-Boot] [STATUS] Resuming ARM activity
Albert ARIBAUD
- [U-Boot] Why u-boot relocate from flash to RAM
FengHua
- [U-Boot] why u-boot relocate it self to RAM from flash?
FengHua
- [U-Boot] [PATCH V2] arm: omap: i2c: don't zero cnt in i2c_write
Lubomir Popov
- [U-Boot] [PULL] u-boot-atmel/master -> u-boot-arm/master
Albert ARIBAUD
- [U-Boot] [PATCH 0/3] OMAP USB host fixes for Beagle & Panda
Marek Vasut
- [U-Boot] [PATCH 0/3] OMAP USB host fixes for Beagle & Panda
Tom Rini
- [U-Boot] [PATCH] ARM: mx53: video: Add IPUv3 LCD support for M53EVK
Marek Vasut
- [U-Boot] [PATCH 0/3] OMAP USB host fixes for Beagle & Panda
Marek Vasut
- [U-Boot] Zynq serial - pull request
Tom Rini
- [U-Boot] [PATCH] Blackfin: remove executable permission of AWK script
Tom Rini
- [U-Boot] [GIT PULL] u-boot-mips/master
Tom Rini
- [U-Boot] [PATCH v4] socfpga: Adding Freeze Controller driver
Albert ARIBAUD
- [U-Boot] [PATCH v2] arm: ep9315: Return back Cirrus Logic EDB9315A board support
Albert ARIBAUD
- [U-Boot] [PATCH v4] socfpga: Adding Freeze Controller driver
Chin Liang See
- [U-Boot] [PATCH v5] socfpga: Adding Freeze Controller driver
Chin Liang See
- [U-Boot] regarding RAM Test
Beagle Board
- [U-Boot] adding NAND support for omap4 (based on pandaboard)
Gupta, Pekon
- [U-Boot] regarding RAM Test
York Sun
- [U-Boot] [PATCH v7 0/13] Driver model implementation, tests, demo and GPIO
Mateusz Zalega
- [U-Boot] [PATCH] powerpc/mpc85xx: Add support for single source clocking
York Sun
- [U-Boot] [PATCH v7 0/13] Driver model implementation, tests, demo and GPIO
Simon Glass
- [U-Boot] [PATCH 0/2 v2] socfpga: Adding Scan Manager
Chin Liang See
- [U-Boot] [PATCH v2 1/2] socfpga: Adding Scan Manager driver
Chin Liang See
- [U-Boot] [PATCH v2 2/2] socfpga: Adding Scan Manager IOCSR handoff files
Chin Liang See
- [U-Boot] sf implementation
Eggler, Ron (GE Energy Management, Non-GE)
- [U-Boot] [PATCH v3] arm: at91: support for the Calao USB-A9263 board (based on AT91SAM9263)
Mateusz Kulikowski
- [U-Boot] why u-boot relocate it self to RAM from flash?
Graeme Russ
- [U-Boot] Why u-boot relocate from flash to RAM
Rommel G Custodio
- [U-Boot] [PATCH v2] trats: usb: Add usb_cable_connected() function
Minkyu Kang
- [U-Boot] [PATCH] arm: exynos: fix set_mmc_clk for exynos4x12
Minkyu Kang
- [U-Boot] [PATCH] arm: exynos: fix the align for exynos4_power structure
Minkyu Kang
- [U-Boot] [PATCH v3 4/4] cmd_eeprom: bug fix for i2c read/write
Kuo-Jung Su
- [U-Boot] [PATCH 5/5] ARM: mx6: Enable PCIe on Sabrelite
Eric Nelson
- [U-Boot] [PATCH 1/3 v6] arm: rmobile: Move lowlevel_init.o to taget of each CPU
Nobuhiro Iwamatsu
- [U-Boot] [PATCH 2/3 v6] arm: rmobile: Add support R8A7790
Nobuhiro Iwamatsu
- [U-Boot] [PATCH 3/3 v6] arm: rmobile: Add support lager board
Nobuhiro Iwamatsu
- [U-Boot] Pull request: u-boot-sh/rmobile into u-boot-arm/master
Nobuhiro Iwamatsu
- [U-Boot] [PATCH] drivers:power:exynos-tmu: add support for Exynos5260
Minkyu Kang
- [U-Boot] [PATCH V2] arm: omap: i2c: don't zero cnt in i2c_write
Lokesh Vutla
- [U-Boot] why u-boot relocate it self to RAM from flash?
tejas patel
- [U-Boot] [PATCH 1/2] arm: exynos/goni: fix the return type for s5p_mmc_init
Jaehoon Chung
- [U-Boot] [PATCH 2/2] arm: exynos: remove the unused define.
Jaehoon Chung
- [U-Boot] [PATCH 1/2] arm: exynos/goni: fix the return type for s5p_mmc_init
Jaehoon Chung
- [U-Boot] [v4 1/6] Driver/DDR: Moving Freescale DDR driver to a common driver
Masahiro Yamada
- [U-Boot] [PATCH 2/2] arm: exynos: remove the unused define.
Alexey Brodkin
- [U-Boot] why u-boot relocate it self to RAM from flash?
Wolfgang Denk
- [U-Boot] [PATCH 2/2] Makefile: Select objects by CONFIG_ rather than $(ARCH) or $(CPU)
Masahiro Yamada
- [U-Boot] [v4 1/6] Driver/DDR: Moving Freescale DDR driver to a common driver
york sun
- [U-Boot] [PATCH 1/9 V9] EXYNOS5: Create a common board file
Minkyu Kang
- [U-Boot] [PATCH 3/9 V9] Exynos5420: Add clock initialization for 5420
Minkyu Kang
- [U-Boot] [PATCH 4/9 V9] Exynos5420: Add DDR3 initialization for 5420
Minkyu Kang
- [U-Boot] [PATCH V3] exynos: spl: Add a custom spi copy function
Minkyu Kang
- [U-Boot] [PATCH] PowerPC: mpc83xx: Do not use absolute paths for obj-y
Masahiro Yamada
- [U-Boot] [PATCH] include/mmc.h: Remove declaration for spl_mmc_load()
Lad, Prabhakar
- [U-Boot] [v4 1/6] Driver/DDR: Moving Freescale DDR driver to a common driver
Masahiro Yamada
- [U-Boot] [PATCH 0/4] Trats2 code cleanups
Minkyu Kang
- [U-Boot] [v4 1/6] Driver/DDR: Moving Freescale DDR driver to a common driver
york sun
- [U-Boot] [PATCH v3 4/4] cmd_eeprom: bug fix for i2c read/write
Alexey Brodkin
- [U-Boot] [PATCH 5/5] ARM: mx6: Enable PCIe on Sabrelite
Stefano Babic
- [U-Boot] [PATCH] ARM/VExpress: fix timer address for TC2 and other VExpress models
Andre Przywara
- [U-Boot] [PATCH 1/2] arm: exynos/goni: fix the return type for s5p_mmc_init
Lukasz Majewski
- [U-Boot] [PATCH V2] arm: omap: i2c: don't zero cnt in i2c_write
Lubomir Popov
- [U-Boot] "make htmldocs" gives error
Abraham V.
- [U-Boot] [PATCH 5/5] ARM: mx6: Enable PCIe on Sabrelite
Marek Vasut
- [U-Boot] [PATCH 5/5] ARM: mx6: Enable PCIe on Sabrelite
Marek Vasut
- [U-Boot] [U-boot] does u-boot support exynos 5420?
TigerLiu at viatech.com.cn
- [U-Boot] [PATCH v15 07/10] arm64: core support
Bhupesh Sharma
- [U-Boot] [PATCH 5/5] ARM: mx6: Enable PCIe on Sabrelite
Stefano Babic
- [U-Boot] [PATCH] tools/.gitignore: omit non-existing tool, ncp from the list
Masahiro Yamada
- [U-Boot] [PATCH v2] trats: usb: Add usb_cable_connected() function
Przemyslaw Marczak
- [U-Boot] [PATCH V2] arm: omap: i2c: don't zero cnt in i2c_write
Lokesh Vutla
- [U-Boot] eMMC issue with dcache ON
Siva Durga Prasad Paladugu
- [U-Boot] [PATCH 5/5] ARM: mx6: Enable PCIe on Sabrelite
Marek Vasut
- [U-Boot] [PATCH v5] socfpga: Adding Freeze Controller driver
Albert ARIBAUD
- [U-Boot] [PATCH 1/2] mx6sabresd: Allow probing HYNC, VSYNC and DISP_CLK signals
Fabio Estevam
- [U-Boot] [PATCH 2/2] mx6sabresd: Fix LVDS width and color format
Fabio Estevam
- [U-Boot] [PATCH 00/10] Introduce Samsung misc file and LCD menu.
Przemyslaw Marczak
- [U-Boot] [PATCH 01/10] s5p: gpio: change gpio coding method for s5p gpio.
Przemyslaw Marczak
- [U-Boot] [PATCH 02/10] trats2: Code cleanup.
Przemyslaw Marczak
- [U-Boot] [PATCH 03/10] samsung: common: Add misc file and common function misc_init_r().
Przemyslaw Marczak
- [U-Boot] [PATCH 04/10] samsung: misc: move display logo function to misc.c file.
Przemyslaw Marczak
- [U-Boot] [PATCH 05/10] lib: tizen: add Tizen 16bpp logo support.
Przemyslaw Marczak
- [U-Boot] [PATCH 06/10] video: exynos: fimd: always use 16bpp display mode.
Przemyslaw Marczak
- [U-Boot] [PATCH 07/10] samsung: misc: Add LCD download menu.
Przemyslaw Marczak
- [U-Boot] [PATCH 08/10] Trats: add LCD download menu support
Przemyslaw Marczak
- [U-Boot] [PATCH 09/10] trats2: add LCD download menu support
Przemyslaw Marczak
- [U-Boot] [PATCH 10/10] universal: add LCD download menu support
Przemyslaw Marczak
- [U-Boot] [PATCH] s5p: gpio: change gpio coding method for s5p gpio.
Przemyslaw Marczak
- [U-Boot] [PATCH 1/5] arm, omap3: Add support for TechNexion modules
Tom Rini
- [U-Boot] [PATCH] mx6: clock: Fix the calculation of PLL_ENET frequency
Fabio Estevam
- [U-Boot] [PATCH 1/2] mx6sabresd: Allow probing HYNC, VSYNC and DISP_CLK signals
Otavio Salvador
- [U-Boot] [PATCH] mx6: clock: Fix the calculation of PLL_ENET frequency
Troy Kisky
- [U-Boot] [PATCH v2] mx6: clock: Fix the calculation of PLL_ENET frequency
Fabio Estevam
- [U-Boot] [PATCH] mx6: clock: Fix the calculation of PLL_ENET frequency
Fabio Estevam
- [U-Boot] No single character output after update to latest u-boot on pandaboard
Tom Rini
- [U-Boot] [PATCH 1/1] powerpc/mpc8349: Use generic mpc85xx DDR driver
York Sun
- [U-Boot] [PATCH v7 0/13] Driver model implementation, tests, demo and GPIO
Simon Glass
- [U-Boot] [PATCH v7 0/13] Driver model implementation, tests, demo and GPIO
Tom Rini
- [U-Boot] [PATCH v7 0/13] Driver model implementation, tests, demo and GPIO
Simon Glass
- [U-Boot] [PATCH v7 0/13] Driver model implementation, tests, demo and GPIO
Tom Rini
- [U-Boot] [PATCH v7 0/13] Driver model implementation, tests, demo and GPIO
Simon Glass
- [U-Boot] [PATCH v2 1/2] mx6sabresd: Allow probing HYNC, VSYNC and DISP_CLK signals
Fabio Estevam
- [U-Boot] [PATCH v2 2/2] mx6sabresd: Fix LVDS width and color format
Fabio Estevam
- [U-Boot] [PATCH v2 1/2] mx6sabresd: Allow probing HYNC, VSYNC and DISP_CLK signals
Otavio Salvador
- [U-Boot] [PATCH v2 2/2] mx6sabresd: Fix LVDS width and color format
Otavio Salvador
- [U-Boot] [PATCH v2 1/6] sandbox: Rename sb_cmdline_option to sandbox_cmdline_option
Simon Glass
- [U-Boot] [PATCH v2 2/6] spi_flash: Add spi_flash_probe_fdt() to locate SPI by FDT node
Simon Glass
- [U-Boot] [PATCH v2 3/6] spi: Add device tree binding for SPI bus
Simon Glass
- [U-Boot] [PATCH v2 4/6] sandbox: spi: Add SPI emulation bus
Simon Glass
- [U-Boot] [PATCH v2 5/6] sandbox: spi: Add new SPI flash driver
Simon Glass
- [U-Boot] [PATCH v2 6/6] sandbox: spi: Enable new spi/sf layers
Simon Glass
- [U-Boot] [PATCH 1/1] powerpc/mpc8349: Use generic mpc85xx DDR driver
Masahiro Yamada
- [U-Boot] [PATCH 00/10] Introduce Samsung misc file and LCD menu.
TigerLiu at viatech.com.cn
- [U-Boot] [PATCH 1/2] mx6sabresd: Allow probing HYNC, VSYNC and DISP_CLK signals
Liu Ying
- [U-Boot] [PATCH v3 1/2] mx6sabresd: Allow probing HSYNC, VSYNC and DISP_CLK signals
Fabio Estevam
- [U-Boot] [PATCH v3 2/2] mx6sabresd: Fix LVDS width and color format
Fabio Estevam
- [U-Boot] [PATCH V2 10/14] ARM: AM43xx: clocks: Update DPLL details for EPOS EVM
Vaibhav Bedia
- [U-Boot] [PATCH V2 13/14] ARM: AM43xx: GP_EVM: Add support for DDR3
Vaibhav Bedia
- [U-Boot] [PATCH] arm: add IPL support
Kuo-Jung Su
- [U-Boot] [PATCH REPOST] ARM: rpi_b: power on SDHCI and USB HW modules
Stephen Warren
- [U-Boot] How to build T2080QDS board?
Masahiro Yamada
- [U-Boot] How to build T2080QDS board?
York Sun
- [U-Boot] No single character output after update to latest u-boot on pandaboard
Lokesh Vutla
- [U-Boot] [PATCH 08/10] Trats: add LCD download menu support
Lukasz Majewski
- [U-Boot] [PATCH] powerpc/t2080qds: undef CONFIG_FSL_DDR_INTERACTIVE
Shengzhou Liu
- [U-Boot] [PATCH] config.mk: Do not include include/config.mk
Masahiro Yamada
- [U-Boot] [PATCH] ARM: OMAP4: Move TEXT_BASE down to non-HS limit
Lokesh Vutla
- [U-Boot] How to build T2080QDS board?
Shengzhou Liu
- [U-Boot] [PATCH v2 1/5] arm, omap3: Add support for TechNexion modules
Stefan Roese
- [U-Boot] [PATCH v2 2/5] arm: omap3: Add SPL support to tao3530
Stefan Roese
- [U-Boot] [PATCH v2 3/5] arm: omap3: Remove bootargs mem_size handling
Stefan Roese
- [U-Boot] [PATCH v2 4/5] arm: omap3: Add board revision output to tao3530
Stefan Roese
- [U-Boot] [PATCH v2 5/5] arm: omap3: Add HEAD acoustics (HA) board variant omap3_ha to tao3530
Stefan Roese
- [U-Boot] [PATCH] PowerPC: mpc83xx: Do not use absolute paths for obj-y
Masahiro Yamada
- [U-Boot] [PATCH 0/3] OMAP USB host fixes for Beagle & Panda
Tomi Valkeinen
- [U-Boot] I want to a board(tiny4412) for exyno4412, but I can't get any output
randy
- [U-Boot] [PATCH v7 0/13] Driver model implementation, tests, demo and GPIO
Michal Simek
- [U-Boot] [PATCH] config.mk: Do not include include/config.mk
Masahiro Yamada
- [U-Boot] [PATCH 0/3] OMAP USB host fixes for Beagle & Panda
Roger Quadros
- [U-Boot] Fwd: [PATCH v4] arm: omap3: Add SPL support to cm_t35
Stefan Roese
- [U-Boot] upstream Arndale support
Andre Przywara
- [U-Boot] Fwd: [PATCH v4] arm: omap3: Add SPL support to cm_t35
Tom Rini
- [U-Boot] [PATCH] video: ipu_disp: Return a negative value on error
Fabio Estevam
- [U-Boot] Fwd: [PATCH v4] arm: omap3: Add SPL support to cm_t35
Stefan Roese
- [U-Boot] [PATCH 00/10] Introduce Samsung misc file and LCD menu.
Przemyslaw Marczak
- [U-Boot] upstream Arndale support
Chander Kashyap
- [U-Boot] Fwd: [PATCH v4] arm: omap3: Add SPL support to cm_t35
Gupta, Pekon
- [U-Boot] [PATCH] video: ipu_disp: Return a negative value on error
Anatolij Gustschin
- [U-Boot] Fwd: [PATCH v4] arm: omap3: Add SPL support to cm_t35
Stefan Roese
- [U-Boot] upstream Arndale support
Andre Przywara
- [U-Boot] [PATCH v5] arm: omap3: Add SPL support to cm_t35
Stefan Roese
- [U-Boot] [PATCH] PowerPC: mpc83xx: Do not use absolute paths for obj-y
Tom Rini
- [U-Boot] [PATCH] ARM: mxs: tools: Fix errno handling in strtoul() invocation
Marek Vasut
- [U-Boot] [uBoot] TI: configs: Commonize the boot of different devices
Tom Rini
- [U-Boot] Sources for MLO on BeagleBone Black?
Satz Klauer
- [U-Boot] [uBoot] TI: configs: Commonize the boot of different devices
Enric Balletbo Serra
- [U-Boot] [PATCH] am335x_evm: Consolidate DFU environment parts into the DFU part of the file
Tom Rini
- [U-Boot] [uBoot] TI: configs: Commonize the boot of different devices
Tom Rini
- [U-Boot] [uBoot] TI: configs: Commonize the boot of different devices
Enric Balletbo Serra
- [U-Boot] Sources for MLO on BeagleBone Black?
Tom Rini
- [U-Boot] toolchain problems when building iMX6 mx6qsabreauto (and another bootloader tool)
Robert Nelson
- [U-Boot] toolchain problems when building iMX6 mx6qsabreauto (and another bootloader tool)
Måns Rullgård
- [U-Boot] toolchain problems when building iMX6 mx6qsabreauto (and another bootloader tool)
Robert Nelson
- [U-Boot] toolchain problems when building iMX6 mx6qsabreauto (and another bootloader tool)
Tom Rini
- [U-Boot] [PATCH V2 10/14] ARM: AM43xx: clocks: Update DPLL details for EPOS EVM
Sekhar Nori
- [U-Boot] BCH8 support when we do not have ELM h/w engine.
Enric Balletbo Serra
- [U-Boot] [PATCH 1/3] usb: ehci-omap: Reset the USB Host OMAP module
Nikita Kiryanov
- [U-Boot] [PATCH] ARM: mx6: Remove the FDT loading address to avoid overlaping
Tom Rini
- [U-Boot] Sources for MLO on BeagleBone Black?
Satz Klauer
- [U-Boot] Sources for MLO on BeagleBone Black?
Robert Nelson
- [U-Boot] Sources for MLO on BeagleBone Black?
Tom Rini
- [U-Boot] [U-Boot,RFC,v2,2/2] ARMV7: OMAP4: Add twl6032 support
Tom Rini
- [U-Boot] [U-Boot, RFC, v2, 1/2] ARMV7: OMAP4: Add struct for twl603x data
Tom Rini
- [U-Boot] [U-Boot,1/3] cm_t335: add cm_t335 board support
Tom Rini
- [U-Boot] [U-Boot,2/3] cm_t335: add support for status LED
Tom Rini
- [U-Boot] [U-Boot, 3/3] cm_t335: add support for pca9555 i2c gpio extender
Tom Rini
- [U-Boot] am33xx: Stop modifying certain EMIF4D registers
Tom Rini
- [U-Boot] [U-Boot, V2, 1/3] ARM: DRA7: Add is_dra7xx cpu check definition
Tom Rini
- [U-Boot] [U-Boot, V2, 2/3] ARM: DRA: EMIF: Change DDR3 settings to use hw leveling
Tom Rini
- [U-Boot] [U-Boot, V2, 3/3] ARM: DRA7/OMAP5: EMIF: Add workaround for bug 0039
Tom Rini
- [U-Boot] ARM: OMAP5+: Remove unnecessary EFUSE settings
Tom Rini
- [U-Boot] arm: omap3: Add uart4 omap3 adddress
Tom Rini
- [U-Boot] am335x_evm: Update nandboot to use partitions and DT
Tom Rini
- [U-Boot] pcm051: Support for revision 3
Tom Rini
- [U-Boot] ARM: OMAP4: Fix bug in omap4470_volts struct
Tom Rini
- [U-Boot] arm: am335x: Add DT (FDT) support to Siemens boards
Tom Rini
- [U-Boot] davinci: fix Master Priority Registers location
Tom Rini
- [U-Boot] [U-Boot, [PATCH, v3] pandaboard: 1/1] ARM:OMAP4+: panda-es: Support Rev B3 Elpida DDR2 RAM
Tom Rini
- [U-Boot] am335x: cpsw: optimize cpsw_recv to increase network performance
Tom Rini
- [U-Boot] am3517_evm: activate Ethernet PHY
Tom Rini
- [U-Boot] [U-Boot, V2] arm: omap3: Enable clocks for peripherals only if they are used
Tom Rini
- [U-Boot] [PATCH 0/3] OMAP USB host fixes for Beagle & Panda
Tom Rini
- [U-Boot] [PATCH v3 0/8] SATA support for omap5_uevm and dra7_evm
Tom Rini
- [U-Boot] Please pull u-boot-ti/master
Tom Rini
- [U-Boot] [PATCH REPOST] spi: tegra: clear RDY bit prior to every transfer
Stephen Warren
- [U-Boot] [PATCH] powerpc/corenet: CPC1 speculation disable
York Sun
- [U-Boot] [PATCH] powerpc/p1010rdb:modify the mtest start_address
York Sun
- [U-Boot] [PATCH v3] powerpc/c29xpcie: Getting DDR SPD image from 16-bit sub-address EEPROM
York Sun
- [U-Boot] [PATCH][v3] powerpc: spiflash:Add corenet devices support in eSPI SPL
York Sun
- [U-Boot] [PATCH] T4240: Address T4240/T4160 Rev2.0 DDR clock change
York Sun
- [U-Boot] [PATCH] powerpc/t2080qds: undef CONFIG_FSL_DDR_INTERACTIVE
York Sun
- [U-Boot] [PATCH 1/1] powerpc/mpc8349: Use generic mpc85xx DDR driver
York Sun
- [U-Boot] Please pull u-boot-mpc85xx/master
York Sun
- [U-Boot] [PATCH] net/fman: add ft_fixup_xgec to support 3rd and 4th 10GEC
York Sun
- [U-Boot] [PATCH 2/2] arm: exynos: remove the unused define.
Minkyu Kang
- [U-Boot] [PATCH 1/2] arm: exynos/goni: fix the return type for s5p_mmc_init
Minkyu Kang
- [U-Boot] Sources for MLO on BeagleBone Black?
Abraham V.
- [U-Boot] [PATCH] drivers:power:exynos-tmu: add support for Exynos5260
Naveen Krishna Ch
- [U-Boot] [PATCH V3 1/6] exynos: Use common pmic_reg_update() definition
Minkyu Kang
- [U-Boot] [PATCH V3 2/6] power: Explicitly select pmic device's bus
Minkyu Kang
- [U-Boot] [PATCH] drivers:power:exynos-tmu: add support for Exynos5260
Minkyu Kang
- [U-Boot] [PATCH] Makefile: use two double-quotations as a pair
Masahiro Yamada
- [U-Boot] [PATCH v2] Makefile: use two double-quotations as a pair
Masahiro Yamada
- [U-Boot] [PATCH v2 1/2] powerpc:mpc85xx: Add ifc nand boot support for TPL/SPL
Po Liu
- [U-Boot] [PATCH v2 2/2] powerpc/c29xpcie: 8k page size NAND boot support base on TPL/SPL
Po Liu
- [U-Boot] Sources for MLO on BeagleBone Black?
Satz Klauer
- [U-Boot] [PATCH] Makefile: correct dependencies of asm-offsets.[hs]
Masahiro Yamada
- [U-Boot] [PATCH] mtd: nand: omap_gpmc: cosmetic: Fix indentation
Stefan Roese
- [U-Boot] [PATCH] mtd: nand: omap_gpmc: cosmetic: Fix indentation
Gupta, Pekon
- [U-Boot] [PATCH 4/9 V9] Exynos5420: Add DDR3 initialization for 5420
Rajeshwari Birje
- [U-Boot] [PATCH] mtd: nand: omap_gpmc: cosmetic: Fix indentation
Stefan Roese
- [U-Boot] [PATCH 4/9 V9] Exynos5420: Add DDR3 initialization for 5420
Minkyu Kang
- [U-Boot] [PATCH 2/5] ARM: Exynos5250: remove redundant defines in exynos5250-dt.h
Minkyu Kang
- [U-Boot] [PATCH 3/5] ARM: Exynos5250: move feature defines out of generic config file
Minkyu Kang
- [U-Boot] please pull u-boot-samsung master
Minkyu Kang
- [U-Boot] OMAP4: NAND support (confusion)
Vikram Singh Shekhawat
- [U-Boot] [PATCH 3/5] ARM: Exynos5250: move feature defines out of generic config file
Rajeshwari Birje
- [U-Boot] [PATCH 3/5] ARM: Exynos5250: move feature defines out of generic config file
Andre Przywara
- [U-Boot] i2c: samsung: register i2c busses for Exynso5420 and Exynos5250
Heiko Schocher
- [U-Boot] ARM: OMAP4: Fix bug in omap4470_volts struct
Lubomir Popov
- [U-Boot] new uboot for custom platform
Cornel Miron
- [U-Boot] i2c: samsung: register i2c busses for Exynso5420 and Exynos5250
Naveen Krishna Ch
- [U-Boot] [PATCH] mtd: nand: omap: fix ecc-layout for HAM1 ecc-scheme
Pekon Gupta
- [U-Boot] [PATCH] mtd: nand: omap: add CONFIG_SPL_NAND_DEVICE_WIDTH to determine NAND device bus-width
Pekon Gupta
- [U-Boot] i2c: samsung: register i2c busses for Exynso5420 and Exynos5250
Heiko Schocher
- [U-Boot] [PATCH] mtd: nand: omap: add CONFIG_SPL_NAND_DEVICE_WIDTH to determine NAND device bus-width
Enric Balletbo Serra
- [U-Boot] arm: am437: Fix offset for USB registers
Dan Murphy
- [U-Boot] new uboot for custom platform
Michael Trimarchi
- [U-Boot] [RFC] Adding spl_usb code to common area
Dan Murphy
- [U-Boot] [RFC] [U-Boot 1/2] common: spl: add USB mass storage as a boot device
Dan Murphy
- [U-Boot] [RFC] [U-Boot 2/2] arm: am437x: Enable the USB boot device
Dan Murphy
- [U-Boot] [PATCH v3] mtd: move & update nand_ecclayout structure (plus board changes)
Scott Wood
- [U-Boot] am3517: segmentation fault in Linux after upgrading from arago src to mainline u-boot
Andreas Naumann
- [U-Boot] am3517: segmentation fault in Linux after upgrading from arago src to mainline u-boot
Måns Rullgård
- [U-Boot] [PATCH REPOST] ARM: rpi_b: power on SDHCI and USB HW modules
Stephen Warren
- [U-Boot] eMMC boot partition support in uboot
Richard Retanubun
- [U-Boot] [PATCH] time: fix usec_to_tick()
Stephen Warren
- [U-Boot] eMMC boot partition support in uboot
Tom Rini
- [U-Boot] [PATCH 1/5] ARM:rmobile: Correct get_time_ms / get_time_us to use lldiv
Tom Rini
- [U-Boot] [PATCH 2/5] ARM:zynq: Correct __udelay to use lldiv
Tom Rini
- [U-Boot] [PATCH 3/5] ARM:PXA: Correct tick_to_time / us_to_tick to use lldiv
Tom Rini
- [U-Boot] [PATCH 4/5] JFFS2: Correct jffs2_1pass_build_lists to use lldiv
Tom Rini
- [U-Boot] [PATCH 5/5] yaffs2: Use lldiv for 64bit division
Tom Rini
- [U-Boot] eMMC boot partition support in uboot
Richard Retanubun
- [U-Boot] [PATCH] arm: add IPL support
Tom Rini
- [U-Boot] Questions:Toolchain for patch [U-Boot,3/4] arm64: Non-manual relocation
Scott Wood
- [U-Boot] [PATCH 1/5] ARM:rmobile: Correct get_time_ms / get_time_us to use lldiv
Nobuhiro Iwamatsu
- [U-Boot] [PATCH 3/5] ARM:PXA: Correct tick_to_time / us_to_tick to use lldiv
Marek Vasut
- [U-Boot] [RFC] implementation of generic distro configs
Dennis Gilmore
- [U-Boot] [PATCH 1/5] add a generic set of configs to enable Distros to more easier support u-boot based systems
Dennis Gilmore
- [U-Boot] [PATCH 2/5] port wandboards to use the generic distro configs
Dennis Gilmore
- [U-Boot] [PATCH 3/5] port omap4 based devices to use generic distro configs
Dennis Gilmore
- [U-Boot] [PATCH 4/5] port beagleboard to use generic distro configs
Dennis Gilmore
- [U-Boot] [PATCH 5/5] port beaglebones to use generic distro configs
Dennis Gilmore
- [U-Boot] [PATCH 5/5] port beaglebones to use generic distro configs
Dennis Gilmore
- [U-Boot] [PATCH 2/5] port wandboards to use the generic distro configs
Robert Nelson
- [U-Boot] new uboot for custom platform
Abraham V.
- [U-Boot] [PATCH 2/5] port wandboards to use the generic distro configs
Dennis Gilmore
- [U-Boot] [PATCH 2/5] port wandboards to use the generic distro configs
Dennis Gilmore
- [U-Boot] [PATCH 2/5] port wandboards to use the generic distro configs
Robert Nelson
- [U-Boot] [PATCH 2/5] port wandboards to use the generic distro configs
Robert Nelson
- [U-Boot] i2c: samsung: register i2c busses for Exynso5420 and Exynos5250
Naveen Krishna Ch
- [U-Boot] [PATCH 1/2] blackfin: Do not generate unused header bootrom-asm-offsets.h
Masahiro Yamada
- [U-Boot] [PATCH 1/2] blackfin: Do not generate unused header bootrom-asm-offsets.h
Zhang, Sonic
- [U-Boot] i2c: samsung: register i2c busses for Exynso5420 and Exynos5250
Heiko Schocher
- [U-Boot] [PATCH v9 0/4] mtd: nand: omap: optimize OMAP NAND driver
Gupta, Pekon
- [U-Boot] [PATCH 1/2] blackfin: Do not generate unused header bootrom-asm-offsets.h
Masahiro Yamada
- [U-Boot] [PATCH v2] i2c: samsung: register i2c busses for Exynso5420 and Exynos5250
Naveen Krishna Chatradhi
- [U-Boot] [PATCH 1/2] blackfin: Do not generate unused header bootrom-asm-offsets.h
Zhang, Sonic
- [U-Boot] [PATCH v9 0/4] mtd: nand: omap: optimize OMAP NAND driver
Stefan Roese
- [U-Boot] [PATCH] mtd: nand: omap: fix ecc-layout for HAM1 ecc-scheme
Stefan Roese
- [U-Boot] [PATCH 1/2] blackfin: Do not generate unused header bootrom-asm-offsets.h
Masahiro Yamada
- [U-Boot] am3517: segmentation fault in Linux after upgrading from arago src to mainline u-boot
Yegor Yefremov
- [U-Boot] [PATCH 0/2] Trivial clean-up
Masahiro Yamada
- [U-Boot] [PATCH 1/2] examples: x86: delete 82559_eeprom
Masahiro Yamada
- [U-Boot] [PATCH 2/2] Makefile, .gitignore: Cleanup non-existing binaries
Masahiro Yamada
- [U-Boot] am3517: segmentation fault in Linux after upgrading from arago src to mainline u-boot
Yegor Yefremov
- [U-Boot] [PATCH] tools/.gitignore: omit non-existing tool, ncp from the list
Masahiro Yamada
- [U-Boot] Pull request: u-boot-blackfin
Sonic Zhang
- [U-Boot] new uboot for custom platform
Olliver Schinagl
- [U-Boot] Please pull u-boot-ti/master
Albert ARIBAUD
- [U-Boot] Stale references in the u-boot-samsung repo
Albert ARIBAUD
- [U-Boot] [PATCH] t2080qds/ddr: update ddr parameters
Shengzhou Liu
- [U-Boot] [PATCH v2] am3517_evm: activate Ethernet PHY
yegorslists at googlemail.com
- [U-Boot] Please pull u-boot-ti/master
Yegor Yefremov
- [U-Boot] please pull u-boot-samsung master
Albert ARIBAUD
- [U-Boot] Please pull u-boot-ti/master
Stefan Roese
- [U-Boot] Please pull u-boot-ti/master
Yegor Yefremov
- [U-Boot] [PATCH v3] am3517_evm: activate Ethernet PHY
yegorslists at googlemail.com
- [U-Boot] [PATCH] arm: exynos: adds ifdef for spi boot
Minkyu Kang
- [U-Boot] [PATCH] arm: arndale: disable spi boot
Minkyu Kang
- [U-Boot] [PATCH v3] am3517_evm: activate Ethernet PHY
Stefan Roese
- [U-Boot] Stale references in the u-boot-samsung repo
Minkyu Kang
- [U-Boot] [PATCH] arm: exynos: adds ifdef for spi boot
Minkyu Kang
- [U-Boot] [PATCH] arm: arndale: disable spi boot
Minkyu Kang
- [U-Boot] [PATCH v3] am3517_evm: activate Ethernet PHY
Yegor Yefremov
- [U-Boot] please pull u-boot-samsung master (v2)
Minkyu Kang
- [U-Boot] [PATCH v2] mmc/dwmmc: modify FIFO threshold only if value explicitly set
Alexey Brodkin
- [U-Boot] [PATCH v2] mmc/dwmmc: modify FIFO threshold only if value explicitly set
Pantelis Antoniou
- [U-Boot] [PATCH 1/5] add a generic set of configs to enable Distros to more easier support u-boot based systems
Wolfgang Denk
- [U-Boot] [PATCH 2/5] port wandboards to use the generic distro configs
Wolfgang Denk
- [PATCH] board: Fix mmc pins and remove some no use gpio.
ayaka
- [U-Boot] [PATCH 0/9] ARMv7: add PSCI support to u-boot
Andre Przywara
- [U-Boot] [PATCH v3] am3517_evm: activate Ethernet PHY
Tom Rini
- [U-Boot] Please pull u-boot-ti/master
Albert ARIBAUD
- [U-Boot] Pull request: u-boot-sh/rmobile into u-boot-arm/master
Albert ARIBAUD
- [U-Boot] [PATCH 0/9] ARMv7: add PSCI support to u-boot
Marc Zyngier
- [U-Boot] I want to a board(tiny4412) for exyno4412, but I can't get any output
randy
- [U-Boot] [PATCH v3] am3517_evm: activate Ethernet PHY
Tom Rini
- [U-Boot] Please pull u-boot-ti/master, v2
Tom Rini
- [U-Boot] [linux-sunxi] Re: [PATCH 0/9] ARMv7: add PSCI support to u-boot
Ian Campbell
- [U-Boot] [PATCH 0/9] ARMv7: add PSCI support to u-boot
Andre Przywara
- [U-Boot] Pull request: u-boot-blackfin
Tom Rini
- [U-Boot] [PATCH v3] am3517_evm: activate Ethernet PHY
Yegor Yefremov
- [U-Boot] Please pull u-boot-mpc85xx/master
Tom Rini
- [U-Boot] [PATCH REPOST] ARM: rpi_b: power on SDHCI and USB HW modules
Andre Heider
- [U-Boot] Please pull u-boot-ti/master
Stefan Roese
- [U-Boot] Please pull u-boot-ti/master, v2
Albert ARIBAUD
- [U-Boot] am3517: segmentation fault in Linux after upgrading from arago src to mainline u-boot
Måns Rullgård
- [U-Boot] Please pull u-boot-ti/master
Albert ARIBAUD
- [U-Boot] [PATCH 2/5] port wandboards to use the generic distro configs
Dennis Gilmore
- [U-Boot] toolchain problems when building iMX6 mx6qsabreauto (and another bootloader tool)
Pierre Aubert
- [U-Boot] new uboot for custom platform
Cornel Miron
- [U-Boot] [PATCH 2/5] port wandboards to use the generic distro configs
Wolfgang Denk
- [U-Boot] [linux-sunxi] Re: [PATCH 0/9] ARMv7: add PSCI support to u-boot
Ian Campbell
- [U-Boot] [linux-sunxi] Re: [PATCH 0/9] ARMv7: add PSCI support to u-boot
Andre Przywara
- [U-Boot] [RFC] ARM: Start using fdt_high for relocation
Tom Rini
- [U-Boot] [PATCH 0/9] ARMv7: add PSCI support to u-boot
Marc Zyngier
- [U-Boot] [PATCH 2/5] port wandboards to use the generic distro configs
Tom Rini
- [U-Boot] please pull u-boot-samsung master (v2)
Albert ARIBAUD
- [U-Boot] [PATCH] t2080qds/ddr: update ddr parameters
York Sun
- [U-Boot] Stale references in the u-boot-samsung repo
Albert ARIBAUD
- [U-Boot] Stale references in the u-boot-samsung repo
Tom Rini
- [U-Boot] [RFC] ARM: Start using fdt_high for relocation
Albert ARIBAUD
- [U-Boot] I want to a board(tiny4412) for exyno4412, but I can't get any output
randy
- [U-Boot] [RFC] implementation of generic distro configs
Tom Rini
- [U-Boot] [RFC] ARM: Start using fdt_high for relocation
Tom Rini
- [U-Boot] [linux-sunxi] Re: [PATCH 0/9] ARMv7: add PSCI support to u-boot
Ian Campbell
- [U-Boot] [linux-sunxi] Re: [PATCH 0/9] ARMv7: add PSCI support to u-boot
Marc Zyngier
- [U-Boot] [PATCH 3/4] at91: nand: switch atmel_nand to generic GPIO API
Scott Wood
- [U-Boot] [PATCH REPOST] ARM: rpi_b: power on SDHCI and USB HW modules
Stephen Warren
- [U-Boot] [RFC] ARM: Start using fdt_high for relocation
Albert ARIBAUD
- [U-Boot] [RFC] ARM: Start using fdt_high for relocation
Wolfgang Denk
- [U-Boot] [RFC][PATCH 0/7] TI: OMAP3: Use common config file.
Enric Balletbo i Serra
- [U-Boot] [RFC][PATCH 1/7] ARM: OMAP4: Rename to ti_omap4_common.h
Enric Balletbo i Serra
- [U-Boot] [RFC][PATCH 2/7] ARM: OMAP5: Rename to ti_omap5_common.h
Enric Balletbo i Serra
- [U-Boot] [RFC][PATCH 3/7] TI: armv7: Move ELM support to SoC configuration file.
Enric Balletbo i Serra
- [U-Boot] [RFC][PATCH 4/7] TI: armv7: Do not define the number DRAM banks if is already defined.
Enric Balletbo i Serra
- [U-Boot] [RFC][PATCH 5/7] ARM: OMAP3: Rename OMAP3_PUBLIC_SRAM_* to NON_SECURE_SRAM_*
Enric Balletbo i Serra
- [U-Boot] [RFC][PATCH 6/7] TI: OMAP3: Create common config files for TI OMAP3 platforms.
Enric Balletbo i Serra
- [U-Boot] [RFC][PATCH 7/7] OMAP3: igep00x0: Convert to ti_omap3_common.h.
Enric Balletbo i Serra
- [U-Boot] [RFC] ARM: Start using fdt_high for relocation
Tom Rini
- [U-Boot] [PATCH 2/5] port wandboards to use the generic distro configs
Wolfgang Denk
- [U-Boot] [RFC] ARM: Start using fdt_high for relocation
Stephen Warren
- [U-Boot] [RFC] ARM: Start using fdt_high for relocation
Tom Rini
- [U-Boot] [PATCH] ARM: align MVBAR on 32 byte boundary
Albert ARIBAUD
- [U-Boot] [PATCH 2/5] port wandboards to use the generic distro configs
Tom Rini
- [U-Boot] [PATCH 2/5] port wandboards to use the generic distro configs
Dennis Gilmore
- [U-Boot] [PATCH 2/5] port wandboards to use the generic distro configs
Wolfgang Denk
- [U-Boot] [RFC] ARM: Start using fdt_high for relocation
Stephen Warren
- [U-Boot] [PATCH 2/5] port wandboards to use the generic distro configs
Wolfgang Denk
- [U-Boot] [PATCH] bootm: Reinstate special case for standalone images
Simon Glass
- [U-Boot] [PATCH 0/8] Secure boot improvements and test on Beaglebone Black
Simon Glass
- [U-Boot] [PATCH 2/5] port wandboards to use the generic distro configs
Dennis Gilmore
- [U-Boot] [PATCH] mtd: nand: omap: add CONFIG_SPL_NAND_DEVICE_WIDTH to determine NAND device bus-width
Scott Wood
- [U-Boot] [PATCH v2 2/2] powerpc/c29xpcie: 8k page size NAND boot support base on TPL/SPL
Scott Wood
- [U-Boot] [PATCH v2 1/2] powerpc:mpc85xx: Add ifc nand boot support for TPL/SPL
Scott Wood
- [U-Boot] [PATCH REPOST] ARM: rpi_b: power on SDHCI and USB HW modules
Stephen Warren
- [U-Boot] [PATCH v1] arm: keep all sections in ELF file
Albert ARIBAUD
- [U-Boot] [PATCH] vexpress: fix timer address on non-A9 platforms
Marc Zyngier
- [U-Boot] [PATCH v2 00/13] ARMv7: add PSCI support to u-boot
Marc Zyngier
- [U-Boot] [PATCH v2 01/13] ARM: HYP/non-sec: fix alignment requirements for vectors
Marc Zyngier
- [U-Boot] [PATCH v2 02/13] ARM: HYP/non-sec: move switch to non-sec to the last boot phase
Marc Zyngier
- [U-Boot] [PATCH v2 03/13] ARM: HYP/non-sec: add a barrier after setting SCR.NS==1
Marc Zyngier
- [U-Boot] [PATCH v2 04/13] ARM: non-sec: reset CNTVOFF to zero
Marc Zyngier
- [U-Boot] [PATCH v2 05/13] ARM: add missing HYP mode constant
Marc Zyngier
- [U-Boot] [PATCH v2 06/13] ARM: HYP/non-sec: add separate section for secure code
Marc Zyngier
- [U-Boot] [PATCH v2 07/13] ARM: HYP/non-sec: allow relocation to secure RAM
Marc Zyngier
- [U-Boot] [PATCH v2 08/13] ARM: HYP/non-sec: add generic ARMv7 PSCI code
Marc Zyngier
- [U-Boot] [PATCH v2 09/13] ARM: HYP/non-sec: add the option for a second-stage monitor
Marc Zyngier
- [U-Boot] [PATCH v2 10/13] ARM: HYP/non-sec/PSCI: emit DT nodes
Marc Zyngier
- [U-Boot] [PATCH v2 11/13] sunxi: fix SRAM_B/SRAM_D memory map
Marc Zyngier
- [U-Boot] [PATCH v2 12/13] sunxi: HYP/non-sec: add sun7i PSCI backend
Marc Zyngier
- [U-Boot] [PATCH v2 13/13] sunxi: HYP/non-sec: configure CNTFRQ on all CPUs
Marc Zyngier
- [U-Boot] [PATCH 2/5] port wandboards to use the generic distro configs
Wolfgang Denk
- [U-Boot] new uboot for custom platform
Benoît Thébaudeau
- [U-Boot] [PATCH] vexpress: fix timer address on non-A9 platforms
Rob Herring
- [U-Boot] [PATCH 3/7] mmc: Enhance erase handling procedure
Pantelis Antoniou
- [U-Boot] [PATCH 4/7] mmc: Update the handling of returned erase block
Pantelis Antoniou
- [U-Boot] [PATCH 5/7] mmc: Enhance mmcinfo command
Pantelis Antoniou
- [U-Boot] [PATCH 7/7] powerpc/esdhc: Update esdhc command execution process
Pantelis Antoniou
- [U-Boot] [PATCH 1/3] esdhc: Workaround for card can't be detected on T4240QDS
Pantelis Antoniou
- [U-Boot] [PATCH 3/3] eSDHC: Calculate envaddr accroding to the address format
Pantelis Antoniou
- [U-Boot] [PATCH 2/3] esdhc: Detecting 8 bit width before mmc initialization
Pantelis Antoniou
- [U-Boot] [PATCH v2] mmc/dwmmc: modify FIFO threshold only if value explicitly set
Pantelis Antoniou
- [U-Boot] [PATCH 1/3] esdhc: Workaround for card can't be detected on T4240QDS
Michael Trimarchi
- [U-Boot] [PATCH] include/mmc.h: Remove declaration for spl_mmc_load()
Pantelis Antoniou
- [U-Boot] [PATCH][v3] powerpc: mmc: Add corenet devices support in esdhc spl
Pantelis Antoniou
- [U-Boot] [PATCH] mmc: add Faraday FTSDC021 SDHCI controller support
Pantelis Antoniou
- [U-Boot] [PATCH 1/4] arm: omap: abb: add missing include
Nikita Kiryanov
- [U-Boot] [PATCH 1/4] arm: omap: abb: add missing include
Nikita Kiryanov
- [U-Boot] [PATCH v2 2/2] powerpc/c29xpcie: 8k page size NAND boot support base on TPL/SPL
Prabhakar Kushwaha
- [U-Boot] [PATCH] t2080qds/ddr: update ddr parameters
Shengzhou.Liu at freescale.com
- [U-Boot] [U-Boot, V2, 1/2] driver:i2c:s3c24x0: adapt driver to new i2c
Heiko Schocher
- [U-Boot] [U-Boot, 2/2] driver:i2c:s3c24x0: fix clock init for hsi2c
Heiko Schocher
- [U-Boot] [U-Boot, v3, 1/4] i2c: fti2c010: cosmetic: coding style cleanup
Heiko Schocher
- [U-Boot] [U-Boot, v3, 2/4] i2c: fti2c010: migrate to new i2c model
Heiko Schocher
- [U-Boot] [U-Boot, v3, 3/4] i2c: fti2c010: serial out r/w address in MSB order
Heiko Schocher
- [U-Boot] [U-Boot, v3, 4/4] cmd_eeprom: bug fix for i2c read/write
Heiko Schocher
- [U-Boot] [U-Boot, V2] arm: omap: i2c: don't zero cnt in i2c_write
Heiko Schocher
- [U-Boot] [U-Boot, v2] i2c: samsung: register i2c busses for Exynso5420 and Exynos5250
Heiko Schocher
- [U-Boot] [i2c] Pull request
Heiko Schocher
- [U-Boot] [PATCH v2] t2080qds/ddr: update ddr parameters
Shengzhou Liu
- [U-Boot] SMDK5250 not booting on latest U-boot-samsung
Rajeshwari Birje
- [U-Boot] [PATCH] arm: add IPL support
Kuo-Jung Su
- [U-Boot] [PATCH 4/9 V9] Exynos5420: Add DDR3 initialization for 5420
Rajeshwari Birje
- [U-Boot] [PATCH 1/6] blackfin: fix build error by adding CONFIG_BFIN_SERIAL
Sonic Zhang
- [U-Boot] [PATCH 2/6] blackfin: fix building error by adding macro CONFIG_SYS_I2C
Sonic Zhang
- [U-Boot] [PATCH 3/6] blackfin: Disable commands to reduce l1 ram requirement
Sonic Zhang
- [U-Boot] [PATCH 4/6] blackfin: fix building error by enlarging the memory size
Sonic Zhang
- [U-Boot] [PATCH 5/6] blackfin: fixing warning by including proper headers
Sonic Zhang
- [U-Boot] [PATCH 6/6] blackfin: remove build warning
Sonic Zhang
- [U-Boot] [PATCH] vexpress: fix timer address on non-A9 platforms
Marc Zyngier
- [U-Boot] [PATCH 00/11 V10] EXYNOS5420: Add SMDK5420 board support
Rajeshwari S Shinde
- [U-Boot] [PATCH 01/11 V10] EXYNOS5: Create a common board file
Rajeshwari S Shinde
- [U-Boot] [PATCH 02/11 V10] Exynos5420: Add base addresses for 5420
Rajeshwari S Shinde
- [U-Boot] [PATCH 03/11 V10] EXYNOS5420: Add power register structure.
Rajeshwari S Shinde
- [U-Boot] [PATCH 04/11 V10] EXYNOS5420: Add dmc and phy_control register structure
Rajeshwari S Shinde
- [U-Boot] [PATCH 05/11 V10] Exynos5420: Add clock initialization for 5420
Rajeshwari S Shinde
- [U-Boot] [PATCH 06/11 V10] Exynos5420: Add DDR3 initialization for 5420
Rajeshwari S Shinde
- [U-Boot] [PATCH 07/11 V10] Exynos5420: Add support for 5420 in pinmux and gpio
Rajeshwari S Shinde
- [U-Boot] [PATCH 08/11 V10] Exynos5420: Add base patch for SMDK5420
Rajeshwari S Shinde
- [U-Boot] [PATCH 09/11 V10] DTS: Add dts support for SMDK5420
Rajeshwari S Shinde
- [U-Boot] [PATCH 10/11 V10] Config: Add initial config for SMDK5420
Rajeshwari S Shinde
- [U-Boot] [PATCH 11/11 V10] SPL: EXYNOS: Prepare for variable size SPL support
Rajeshwari S Shinde
- [U-Boot] Pull request mmc tree
Pantelis Antoniou
- [U-Boot] [PATCH] powerpc/mpc85xx: Add support for single source clocking
Priyanka.Jain at freescale.com
- [U-Boot] [PATCH] powerpc/mpc85xx: Add support for single source clocking
Priyanka.Jain at freescale.com
- [U-Boot] [PATCH] netbsd:fix documentation typo.
Kees Jongenburger
- [U-Boot] [PATCH 1/3] arm: atmel: sama5d3: add spi spl boot support
Andreas Bießmann
- [U-Boot] [U-Boot, v3, 4/4] cmd_eeprom: bug fix for i2c read/write
Alexey Brodkin
- [U-Boot] [PATCH v2 00/13] ARMv7: add PSCI support to u-boot
Ian Campbell
- [U-Boot] [PATCH v2 01/13] ARM: HYP/non-sec: fix alignment requirements for vectors
Ian Campbell
- [U-Boot] [PATCH v2 00/13] ARMv7: add PSCI support to u-boot
Marc Zyngier
- [U-Boot] new uboot for custom platform
Lukasz Majewski
- [U-Boot] [U-Boot, v3, 4/4] cmd_eeprom: bug fix for i2c read/write
Heiko Schocher
- [U-Boot] [linux-sunxi] Re: [PATCH v2 00/13] ARMv7: add PSCI support to u-boot
Hans de Goede
- [U-Boot] [linux-sunxi] Re: [PATCH v2 00/13] ARMv7: add PSCI support to u-boot
Marc Zyngier
- [U-Boot] [linux-sunxi] Re: [PATCH v2 00/13] ARMv7: add PSCI support to u-boot
Ian Campbell
- [U-Boot] [U-Boot,1/4] at91: add new gpio pin definitions
Andreas Bießmann
- [U-Boot] [U-Boot,2/4] at91: redefine legacy GPIO PIN_BASE
Andreas Bießmann
- [U-Boot] [U-Boot,3/4] at91: nand: switch atmel_nand to generic GPIO API
Andreas Bießmann
- [U-Boot] [U-Boot,4/4] at91: switch coloured LED to gpio API
Andreas Bießmann
- [U-Boot] [U-Boot,v3,1/2] arm, at91: add Siemens board taurus and axm
Andreas Bießmann
- [U-Boot] [U-Boot,v3,2/2] arm, at91: add siemens corvus board
Andreas Bießmann
- [U-Boot] [U-Boot, v3] arm: at91: support for the Calao USB-A9263 board (based on AT91SAM9263)
Andreas Bießmann
- [U-Boot] [PULL] u-boot-atmel/master -> u-boot-arm/master
Andreas Bießmann
- [U-Boot] [PATCH] lib/time - fix "usec_to_tick" calculation for hi freq system timers
Alexey Brodkin
- [U-Boot] [PATCH] lib/time - remove obsolete code
Alexey Brodkin
- [U-Boot] new uboot for custom platform
Cornel Miron
- [U-Boot] [PATCH] time: fix usec_to_tick()
Rob Herring
- [U-Boot] [PATCH v5] at91: add support for CDU9G25 board
Andreas Bießmann
- [U-Boot] Creating U-Boot env image
Alexey Smishlayev
- [U-Boot] [PATCH 0/4] dfu: Provide proper Poll Timeout values
Lukasz Majewski
- [U-Boot] [PATCH 1/4] dfu: Export allocated dfu buffer size
Lukasz Majewski
- [U-Boot] [PATCH 2/4] usb: dfu: f_dfu: Provide infrastructure to adjust DFU's Poll Timeout value
Lukasz Majewski
- [U-Boot] [PATCH 3/4] usb: f_dfu: cosmetic: Code cleanup
Lukasz Majewski
- [U-Boot] [PATCH 4/4] ARM: trats: dfu: Enable default Poll Timeout for Trats board
Lukasz Majewski
- [U-Boot] [PATCH 1/4] arm: omap: abb: add missing include
menon.nishanth at gmail.com
- [U-Boot] [PATCH] powerpc/mpc85xx: Add support for single source clocking
York Sun
- [U-Boot] [PATCH] ARM: tegra: Use the IRAM for the early stack
Alban Bedel
- [U-Boot] [PATCH v3 1/4] mkexynosspl: fix uninitialized buffer
Albert ARIBAUD
- [U-Boot] [PATCH v3 2/4] cm_t335: fix linker file to produce full ELF
Albert ARIBAUD
- [U-Boot] [PATCH v3 3/4] arm: make _end compiler-generated
Albert ARIBAUD
- [U-Boot] [PATCH v3 4/4] arm: remove unneeded symbol offsets and _TEXT_BASE
Albert ARIBAUD
- [U-Boot] [PATCH] ARM: tegra: Use the IRAM for the early stack
Stephen Warren
- [U-Boot] [PATCH v2] t2080qds/ddr: update ddr parameters
York Sun
- [U-Boot] [PATCH v2 2/2] powerpc/c29xpcie: 8k page size NAND boot support base on TPL/SPL
Scott Wood
- [U-Boot] [PULL] u-boot-atmel/master -> u-boot-arm/master
Albert ARIBAUD
- [U-Boot] [PATCH v2 00/12] NAND/MMC environment in SPL, Falcon Mode enhancements
Tom Rini
- [U-Boot] [PATCH v2 01/12] TI:armv7: Change CONFIG_SPL_STACK to not be CONFIG_SYS_INIT_SP_ADDR
Tom Rini
- [U-Boot] [PATCH v2 02/12] fw_env.c: Switch get_config to use '%ms' in sscanf
Tom Rini
- [U-Boot] [PATCH v2 03/12] env_mmc.c: Allow environment to be used within SPL
Tom Rini
- [U-Boot] [PATCH v2 04/12] env_mmc.c: Remove NULL check on tmp_env1/2
Tom Rini
- [U-Boot] [PATCH v2 05/12] mtd: Add a CONFIG_SPL_MTD_SUPPORT for a more full NAND subsystem in SPL
Tom Rini
- [U-Boot] [PATCH v2 06/12] mtd: Build nand_util.o for CONFIG_ENV_IS_IN_NAND in SPL
Tom Rini
- [U-Boot] [PATCH v2 07/12] spl: Make CONFIG_SPL_ENV_SUPPORT have to be set by all users of env in SPL
Tom Rini
- [U-Boot] [PATCH v2 08/12] am335x_evm: Make SPL_OS also check the boot_os variable for falcon mode
Tom Rini
- [U-Boot] [PATCH v2 09/12] README: Add CONFIG_SPL_OS_BOOT to README
Tom Rini
- [U-Boot] [PATCH v2 10/12] README.falcon: Document environment variables for falcon mode
Tom Rini
- [U-Boot] [PATCH v2 11/12] a3m071: Make spl_start_uboot test like getenv_yesno does
Tom Rini
- [U-Boot] [PATCH v2 12/12] spl_mmc/CONFIG_SPL_OS_BOOT: Allow environment to determine what to boot
Tom Rini
- [U-Boot] [PATCH] ARM: tegra: Use the IRAM for the early stack
Alban Bedel
- [U-Boot] [PATCH] ARM: tegra: Use the IRAM for the early stack
Stephen Warren
- [U-Boot] SMDK5250 not booting on latest U-boot-samsung
Albert ARIBAUD
- [U-Boot] [PATCH REPOST] ARM: rpi_b: power on SDHCI and USB HW modules
Andre Heider
- [U-Boot] Creating U-Boot env image
Wolfgang Denk
- [U-Boot] [PATCH REPOST] ARM: rpi_b: power on SDHCI and USB HW modules
Stephen Warren
- [U-Boot] Please pull u-boot-x86.git
Simon Glass
- [U-Boot] [PATCH REPOST] ARM: rpi_b: power on SDHCI and USB HW modules
Andre Heider
- [U-Boot] Creating U-Boot env image
Alexey Smishlayev
- [U-Boot] Creating U-Boot env image
Stephen Warren
- [U-Boot] [PATCH v2 06/12] mtd: Build nand_util.o for CONFIG_ENV_IS_IN_NAND in SPL
Scott Wood
- [U-Boot] [PATCH 1/3] arm: atmel: sama5d3: add spi spl boot support
Bo Shen
- [U-Boot] OMAP4: NAND support (confusion)
Vikram Singh Shekhawat
- [U-Boot] [PATCH] bootm: Reinstate special case for standalone images
Michal Simek
- [U-Boot] [PATCH 1/7 V3] mmc: Add some usefull macro definition
Haijun Zhang
- [U-Boot] [PATCH 2/7 V3] mmc: Get secure erase information from card
Haijun Zhang
- [U-Boot] [PATCH 3/7 V3] mmc: Enhance erase handling procedure
Haijun Zhang
- [U-Boot] [PATCH 4/7 V3] mmc: Update the handling of returned erase block
Haijun Zhang
- [U-Boot] [PATCH 5/7 V3] mmc: Enhance mmcinfo command
Haijun Zhang
- [U-Boot] [PATCH 6/7 V3] Powerpc/esdhc: Add esdhc host version define
Haijun Zhang
- [U-Boot] [PATCH 7/7 V3] powerpc/esdhc: Update esdhc command execution process
Haijun Zhang
- [U-Boot] FW: [PATCH 06/10] video: exynos: fimd: always use 16bpp display mode.
Donghwa Lee
- [U-Boot] [PATCH v2 2/2] powerpc/c29xpcie: 8k page size NAND boot support base on TPL/SPL
Prabhakar Kushwaha
- [U-Boot] [PATCH 2/4] usb: dfu: f_dfu: Provide infrastructure to adjust DFU's Poll Timeout value
Bo Shen
- [U-Boot] [PATCH 05/10] lib: tizen: add Tizen 16bpp logo support.
Przemyslaw Marczak
- [U-Boot] [PATCH] board/freescale:Remove use of CONFIG_SPL_NAND_MINIMAL
Prabhakar Kushwaha
- [U-Boot] [PATCH] board/t1040qds: Fix typo in t1040_pbi.cfg file
Prabhakar Kushwaha
- [U-Boot] [PATCH 0/3] arm: atmel: clean up for at91sam9x5ek board
Bo Shen
- [U-Boot] [PATCH 1/3] arm: atmel: at91sam9x5: cleanup cs configure for spi
Bo Shen
- [U-Boot] [PATCH 2/3] arm: atmel: at91sam9x5: cleanup unneeded undef
Bo Shen
- [U-Boot] [PATCH 3/3] arm: atmel: at91sam9x5: move CONFIG_SYS_NO_FLASH to proper position
Bo Shen
- [U-Boot] FW: [PATCH 06/10] video: exynos: fimd: always use 16bpp display mode.
Przemyslaw Marczak
- [U-Boot] [PATCH 1/7 V4] mmc: Add some usefull macro definition
Haijun Zhang
- [U-Boot] [PATCH 2/7 V4] mmc: Get secure erase information from card
Haijun Zhang
- [U-Boot] [PATCH 3/7 V4] mmc: Enhance erase handling procedure
Haijun Zhang
- [U-Boot] [PATCH 4/7 V4] mmc: Update the handling of returned erase block
Haijun Zhang
- [U-Boot] [PATCH 5/7 V4] mmc: Enhance mmcinfo command
Haijun Zhang
- [U-Boot] [PATCH 6/7 V4] Powerpc/esdhc: Add esdhc host version define
Haijun Zhang
- [U-Boot] [PATCH 7/7 V4] powerpc/esdhc: Update esdhc command execution process
Haijun Zhang
- [U-Boot] [PATCH 2/7 V3] mmc: Get secure erase information from card
Pantelis Antoniou
- [U-Boot] [PATCH 3/7 V3] mmc: Enhance erase handling procedure
Pantelis Antoniou
- [U-Boot] BCH8 support when we do not have ELM h/w engine.
Enric Balletbo Serra
- [U-Boot] [PATCH 2/4] usb: dfu: f_dfu: Provide infrastructure to adjust DFU's Poll Timeout value
Lukasz Majewski
- [U-Boot] [PATCH 4/7 V3] mmc: Update the handling of returned erase block
Pantelis Antoniou
- [U-Boot] [PATCH 2/4] usb: dfu: f_dfu: Provide infrastructure to adjust DFU's Poll Timeout value
Bo Shen
- [U-Boot] BCH8 support when we do not have ELM h/w engine.
Gupta, Pekon
- [U-Boot] [U-boot] the relationship between CONFIG_LCD / CONFIG_VIDEO / CONFIG_CFB_CONSOLE
TigerLiu at viatech.com.cn
- [U-Boot] BCH8 support when we do not have ELM h/w engine.
Enric Balletbo Serra
- [U-Boot] FW: [PATCH 06/10] video: exynos: fimd: always use 16bpp display mode.
Ajay kumar
- [U-Boot] [PATCH 06/10] video: exynos: fimd: always use 16bpp display mode.
Donghwa Lee
- [U-Boot] [PATCH] powerpc/p1_p2_rdb_pc: Fix warnings for __iomem pointers
Claudiu Manoil
- [U-Boot] [PATCH V3 00/14] ARM: AM43xx: Update support for AM4372 SoC
Lokesh Vutla
- [U-Boot] [PATCH V3 01/14] ARM: AM43xx: Update the base addresses of modules
Lokesh Vutla
- [U-Boot] [PATCH V3 02/14] ARM: AM43xx: Adapt to ti_armv7_common.h config file
Lokesh Vutla
- [U-Boot] [PATCH V3 03/14] ARM: AM43xx: Add L2 Support
Lokesh Vutla
- [U-Boot] [PATCH V3 04/14] ARM: AM43xx: Add extra ENV settings
Lokesh Vutla
- [U-Boot] [PATCH V3 05/14] ARM: AM43XX: board: add support for reading onboard EEPROM
Lokesh Vutla
- [U-Boot] [PATCH V3 06/14] ARM: AM43XX: Add CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG support
Lokesh Vutla
- [U-Boot] [PATCH V3 07/14] ARM: AM43xx: Select clk source for Timer2
Lokesh Vutla
- [U-Boot] [PATCH V3 08/14] ARM: AM43xx: Update Current Booting devices list
Lokesh Vutla
- [U-Boot] [PATCH V3 09/14] ARM: AM43xx: mux: Update mux data
Lokesh Vutla
- [U-Boot] [PATCH V3 10/14] ARM: AM43xx: clocks: Update DPLL details
Lokesh Vutla
- [U-Boot] [PATCH V3 11/14] ARM: AM33xx+: Update ioregs to pass different values
Lokesh Vutla
- [U-Boot] [PATCH V3 12/14] ARM: AM43xx: EPOS_EVM: Add support for LPDDR2
Lokesh Vutla
- [U-Boot] [PATCH V3 13/14] ARM: AM43xx: GP_EVM: Add support for DDR3
Lokesh Vutla
- [U-Boot] [PATCH V3 14/14] ARM: AM43xx: Add Maintainer
Lokesh Vutla
- [U-Boot] [PATCH 04/10] samsung: misc: move display logo function to misc.c file.
황형원
- [U-Boot] [PATCH 0/4] dfu: Provide proper Poll Timeout values
Lukasz Majewski
- [U-Boot] SMDK5250 not booting on latest U-boot-samsung
Albert ARIBAUD
- [U-Boot] [PATCH v3 1/2] arm: rmobile: Add support r8a7790
Albert ARIBAUD
- [U-Boot] [U-Boot, v3, 4/4] cmd_eeprom: bug fix for i2c read/write
Alexey Brodkin
- [U-Boot] [PATCH v2] net: Add fixed phy driver
Christian Gmeiner
- [U-Boot] [PATCH 0/4] dfu: Provide proper Poll Timeout values
Heiko Schocher
- [U-Boot] toolchain problems when building iMX6 mx6qsabreauto (and another bootloader tool)
Christian Gmeiner
- [U-Boot] [PATCH v2] arm: ep9315: Return back Cirrus Logic EDB9315A board support
Albert ARIBAUD
- [U-Boot] [PATCH v3 1/2] arm: rmobile: Add support r8a7790
Albert ARIBAUD
- [U-Boot] [PATCH 1/4] dfu: Export allocated dfu buffer size
Heiko Schocher
- [U-Boot] [PATCH 2/4] usb: dfu: f_dfu: Provide infrastructure to adjust DFU's Poll Timeout value
Heiko Schocher
- [U-Boot] [PATCH 3/4] usb: f_dfu: cosmetic: Code cleanup
Heiko Schocher
- [U-Boot] [PATCH 4/4] ARM: trats: dfu: Enable default Poll Timeout for Trats board
Heiko Schocher
- [U-Boot] [PATCH] am335x, siemens boards: adapt default environment setting
Heiko Schocher
- [U-Boot] Creating U-Boot env image
Mats Kärrman
- [U-Boot] [PATCH] serial: zynq: Remove unused #defines
Albert ARIBAUD
- [U-Boot] [PATCH] serial: zynq: Remove unused #defines
Michal Simek
- [U-Boot] [PATCH] serial: zynq: Remove unused #defines
Albert ARIBAUD
- [U-Boot] Creating U-Boot env image
Alexey Smishlayev
- [U-Boot] [PATCH 1/2] net: tsec: Fix NULL access in case init_phy() fails
Claudiu Manoil
- [U-Boot] [PATCH 2/2] net: Merge asm/fsl_enet.h into fsl_mdio.h
Claudiu Manoil
- [U-Boot] Creating U-Boot env image
Mats Kärrman
- [U-Boot] Creating U-Boot env image
Alexey Smishlayev
- [U-Boot] [PATCH 0/4] dfu: Provide proper Poll Timeout values
Marek Vasut
- [U-Boot] [PATCH] netbsd:fix documentation typo.
Qais Yousef
- [U-Boot] [PATCH] arm: add IPL support
Tom Rini
- [U-Boot] [PATCH] bootm: Reinstate special case for standalone images
Tom Rini
- [U-Boot] [PATCH] fuelgauge: max17042: fix i2c read issue which causes infinity loop.
Przemyslaw Marczak
- [U-Boot] patchwork not responding
York Sun
- [U-Boot] patchwork not responding
Joe Hershberger
- [U-Boot] [PATCH] board/freescale:Remove use of CONFIG_SPL_NAND_MINIMAL
Scott Wood
- [U-Boot] [PATCH v2 2/2] powerpc/c29xpcie: 8k page size NAND boot support base on TPL/SPL
Scott Wood
- [U-Boot] [PATCH v2] netbsd:fix documentation typo.
Kees Jongenburger
- [U-Boot] [PATCH] board_f: explicitly disable console on early boot
Alexey Brodkin
- [U-Boot] Pull request: u-boot-arm/master
Albert ARIBAUD
- [U-Boot] [PATCH] board_f: explicitly disable console on early boot
Simon Glass
- [U-Boot] [PATCH] spl/Makefile: merge LIBS-y += arch/$(ARCH)/imx-common
Masahiro Yamada
- [U-Boot] [U-Boot, v3, 4/4] cmd_eeprom: bug fix for i2c read/write
Kuo-Jung Su
- [U-Boot] [PATCH v3 1/2] arm: rmobile: Add support r8a7790
Nobuhiro Iwamatsu
- [U-Boot] [PATCH] fuelgauge: max17042: fix i2c read issue which causes infinity loop.
Minkyu Kang
- [U-Boot] [PATCH] arm: add IPL support
Kuo-Jung Su
- [U-Boot] [PATCH v2 2/2] powerpc/c29xpcie: 8k page size NAND boot support base on TPL/SPL
Po.Liu at freescale.com
- [U-Boot] [PATCH v2 2/2] powerpc/c29xpcie: 8k page size NAND boot support base on TPL/SPL
Po.Liu at freescale.com
- [U-Boot] [PATCH 3/7 V3] mmc: Enhance erase handling procedure
Michael Trimarchi
- [U-Boot] [PATCH 3/7 V3] mmc: Enhance erase handling procedure
Haijun.Zhang at freescale.com
- [U-Boot] [PATCH 00/11 V10] EXYNOS5420: Add SMDK5420 board support
Rajeshwari Birje
- [U-Boot] [PATCH][v2] powerpc/mpc85xx: Add support for single source clocking
Priyanka Jain
- [U-Boot] [PATCH 1/3 V2] esdhc: Workaround for card can't be detected on T4240QDS
Haijun Zhang
- [U-Boot] [PATCH 2/3 V2] esdhc: Detecting 8 bit width before mmc initialization
Haijun Zhang
- [U-Boot] [PATCH 3/3 V2] eSDHC: Calculate envaddr accroding to the address format
Haijun Zhang
- [U-Boot] tool for visualizing the map files?
Abraham V.
- [U-Boot] [PATCH] ARM: Samsung: Change GONI and Universal_C210 maintainers.
Lukasz Majewski
- [U-Boot] [PATCH v2 2/2] powerpc/c29xpcie: 8k page size NAND boot support base on TPL/SPL
Po.Liu at freescale.com
- [U-Boot] [PATCH v2 2/2] powerpc/c29xpcie: 8k page size NAND boot support base on TPL/SPL
Prabhakar Kushwaha
- [U-Boot] [PATCH 1/2] rcar_i2c: Fix receiving wait condition
Nobuhiro Iwamatsu
- [U-Boot] [PATCH 2/2] rcar_i2c: Clear status before start master receive
Nobuhiro Iwamatsu
- [U-Boot] [PATCH v2 2/2] powerpc/c29xpcie: 8k page size NAND boot support base on TPL/SPL
Prabhakar Kushwaha
- [U-Boot] [PATCH][v2] board/freescale:Remove use of CONFIG_SPL_NAND_MINIMAL
Prabhakar Kushwaha
- [U-Boot] [PATCH] powerpc/mpc85xx: Update CONFIG_SYS_FSL_TBCLK_DIV for T1040
Prabhakar Kushwaha
- [U-Boot] [PATCH 1/4] arm: rmobile: Add register infomation for i2c of R8A7790
Nobuhiro Iwamatsu
- [U-Boot] [PATCH 2/4] arm: lager: Add support Ethernet
Nobuhiro Iwamatsu
- [U-Boot] [PATCH 3/4] arm: lager: Add support I2C
Nobuhiro Iwamatsu
- [U-Boot] [PATCH 4/4] arm: lager: Add support reset function
Nobuhiro Iwamatsu
- [U-Boot] [PATCH 1/4] arm: rmobile: Add register infomation for i2c of R8A7791
Nobuhiro Iwamatsu
- [U-Boot] [PATCH 2/4] arm: koelsch: Add support Ethernet
Nobuhiro Iwamatsu
- [U-Boot] [PATCH 3/4] arm: koelsch: Add support I2C
Nobuhiro Iwamatsu
- [U-Boot] [PATCH 4/4] arm: koelsch: Add support reset function
Nobuhiro Iwamatsu
- [U-Boot] [PATCH] arm: rmobile: Update README.rmobile
Nobuhiro Iwamatsu
- [U-Boot] [PATCH 08/10] Trats: add LCD download menu support
Minkyu Kang
- [U-Boot] [PATCH 07/10] samsung: misc: Add LCD download menu.
Minkyu Kang
- [U-Boot] [PATCH 04/10] samsung: misc: move display logo function to misc.c file.
Minkyu Kang
- [U-Boot] [PATCH 03/10] samsung: common: Add misc file and common function misc_init_r().
Minkyu Kang
- [U-Boot] [PATCH] ARM: Samsung: Change GONI and Universal_C210 maintainers.
Minkyu Kang
- [U-Boot] Some M68K boards are depending the specific order of libraries
Masahiro Yamada
- [U-Boot] Creating U-Boot env image
Bo Shen
- [U-Boot] [PATCH 03/10] samsung: common: Add misc file and common function misc_init_r().
Przemyslaw Marczak
- [U-Boot] Some M68K boards are depending the specific order of libraries
Andreas Bießmann
- [U-Boot] Some M68K boards are depending the specific order of libraries
Masahiro Yamada
- [U-Boot] [PATCH 0/34] Switch over to real Kbuild
Masahiro Yamada
- [U-Boot] [PATCH 01/34] .gitignore: ingore files generated by Kbuild
Masahiro Yamada
- [U-Boot] [PATCH 02/34] Makefile.host.tmp: add a new script to refactor tools
Masahiro Yamada
- [U-Boot] [PATCH 03/34] tools: convert makefiles to kbuild style
Masahiro Yamada
- [U-Boot] [PATCH 04/34] board: samsung: refactor host programs
Masahiro Yamada
- [U-Boot] [PATCH 05/34] examples: Use scripts/Makefile.build
Masahiro Yamada
- [U-Boot] [PATCH 06/34] nand-spl: Use scripts/Makefile.build
Masahiro Yamada
- [U-Boot] [PATCH 07/34] Makfile: move suffix rules to Makefile.build
Masahiro Yamada
- [U-Boot] [PATCH 08/34] Makefile: move some variable definitions to the top Makefile
Masahiro Yamada
- [U-Boot] [PATCH 09/34] Makefile: move BFD_ROOT_DIR to tools/gdb/Makefile
Masahiro Yamada
- [U-Boot] [PATCH 10/34] Kbuild: import Kbuild.include from linux v3.12 tag
Masahiro Yamada
- [U-Boot] [PATCH 11/34] Kbuild: Use Kbuild.include
Masahiro Yamada
- [U-Boot] [PATCH 12/34] Makefile: move more flags to the top Makefile
Masahiro Yamada
- [U-Boot] [PATCH 13/34] Makefile: refactor include path settings
Masahiro Yamada
- [U-Boot] [PATCH 14/34] Makefile: move more stuff to top Makefile
Masahiro Yamada
- [U-Boot] [PATCH 15/34] Makefile: move some flags to spl/Makefile
Masahiro Yamada
- [U-Boot] [PATCH 16/34] Makefile: move some flags to examples makefiles
Masahiro Yamada
- [U-Boot] [PATCH 17/34] Kbuild: change out-of-tree building
Masahiro Yamada
- [U-Boot] [PATCH 18/34] Kbuild: add dummy obj-y to create built-in.o
Masahiro Yamada
- [U-Boot] [PATCH 19/34] Makefile: rename scripts/Makefile.build to scripts/Makefile.build.tmp
Masahiro Yamada
- [U-Boot] [PATCH 20/34] Kbuild: import more build scripts from Linux v3.12 tag
Masahiro Yamada
- [U-Boot] [PATCH 21/34] Kbuild: use Linux Kernel build scripts
Masahiro Yamada
- [U-Boot] [PATCH 22/34] Kbuild: delete temporary build scripts
Masahiro Yamada
- [U-Boot] [PATCH 23/34] Kbuild: move some lines to more suitable place
Masahiro Yamada
- [U-Boot] [PATCH 24/34] Kbuild: convert some make rules to Kbuild style
Masahiro Yamada
- [U-Boot] [PATCH 25/34] Kbuild: move include directives of board configuration files
Masahiro Yamada
- [U-Boot] [PATCH 26/34] Kbuild: generate {spl, tpl}-autoconf.mk only when it is necessary
Masahiro Yamada
- [U-Boot] [PATCH 27/34] Makefile: remove a cleaning target "tidy"
Masahiro Yamada
- [U-Boot] [PATCH 28/34] Kbuild: change the top Makefile to more Kbuild-ish structure
Masahiro Yamada
- [U-Boot] [PATCH 29/34] examples: move api/ and standalone/ to examples/Makefile
Masahiro Yamada
- [U-Boot] [PATCH 30/34] Kbuild: refactor Makefile and spl/Makefile more
Masahiro Yamada
- [U-Boot] [PATCH 31/34] Makefile: Do not pass MTD_VERSION from the top Makefile
Masahiro Yamada
- [U-Boot] [PATCH 32/34] Makefile: refactor tools-all targets
Masahiro Yamada
- [U-Boot] [PATCH 33/34] Kbuild: use scripts/Makefile.clean
Masahiro Yamada
- [U-Boot] [PATCH 34/34] Kbuild: support simultaneous board configuration and "make all"
Masahiro Yamada
- [U-Boot] [RFC PATCH] Add support for Micron MT29F8G08 8Gb NAND flash MID: 0x2c, DID: 0x38
micro1183
- [U-Boot] [PATCH v5] Makefile: add a new script to check -fstack-usage support
Masahiro Yamada
- [U-Boot] [PATCH v4] config.mk: fix -fstack-usage support test
Masahiro Yamada
- [U-Boot] [PATCH 07/10] samsung: misc: Add LCD download menu.
Przemyslaw Marczak
- [U-Boot] [PATCH v14] Introduced btrfs file-system with btrload command
Koen Kooi
- [U-Boot] [PATCH 08/10] Trats: add LCD download menu support
Przemyslaw Marczak
- [U-Boot] [PATCH 05/10] lib: tizen: add Tizen 16bpp logo support.
Przemyslaw Marczak
- [U-Boot] [PATCH] env_eeprom - fix bus recovery for "eeprom_bus_read"
Alexey Brodkin
- [U-Boot] [PATCH v5] arm: omap3: Add SPL support to cm_t35
Igor Grinberg
- [U-Boot] am3517_evm: Ethernet activation
yegorslists at googlemail.com
- [U-Boot] [PATCH v4] am3517_evm: activate Ethernet PHY
yegorslists at googlemail.com
- [U-Boot] [PATCH v5] arm: omap3: Add SPL support to cm_t35
Stefan Roese
- [U-Boot] [PATCH] arm: omap: cm_t35: update config file
Nikita Kiryanov
- [U-Boot] [PATCH] arm: omap: cm_t35: update config file
Stefan Roese
- [U-Boot] [PATCH v2 2/2] powerpc/c29xpcie: 8k page size NAND boot support base on TPL/SPL
Scott Wood
- [U-Boot] Please pull u-boot-x86.git
Tom Rini
- [U-Boot] [i2c] Pull request
Tom Rini
- [U-Boot] Pull request mmc tree
Tom Rini
- [U-Boot] Pull request: u-boot-arm/master
Tom Rini
- [U-Boot] [PATCH 0/2] Introduce CONFIG_NAND_OMAP_SW_ECC_LEGACY, and use it on cm_t35
Nikita Kiryanov
- [U-Boot] [PATCH 1/2] arm: omap: nand: introduce CONFIG_NAND_OMAP_SW_ECC_LEGACY
Nikita Kiryanov
- [U-Boot] [PATCH 2/2] arm: omap: cm_t35: fix nand sw ecc incompatibility with X-Loader
Nikita Kiryanov
- [U-Boot] [RFC PATCH] Add support for Micron MT29F8G08 8Gb NAND flash MID: 0x2c, DID: 0x38
Scott Wood
- [U-Boot] [PATCH][v2] powerpc/mpc85xx: Add support for single source clocking
York Sun
- [U-Boot] [PATCH] powerpc/t4240: Add a frequency setting case for fman1
York Sun
- [U-Boot] [PATCH] net/fman: add ft_fixup_xgec to support 3rd and 4th 10GEC
York Sun
- [U-Boot] [PATCH] powerpc/p1_p2_rdb_pc: Fix warnings for __iomem pointers
York Sun
- [U-Boot] [PATCH] powerpc/mpc85xx: Update CONFIG_SYS_FSL_TBCLK_DIV for T1040
York Sun
- [U-Boot] [PATCH 0/34] Switch over to real Kbuild
Simon Glass
- [U-Boot] Please pull u-boot-mpc85xx/master
York Sun
- [U-Boot] [PATCH] Revert "ARM: move interrupt_init to before relocation"
Albert ARIBAUD
- [U-Boot] [PATCH v15 00/10] arm64 patch
Albert ARIBAUD
- [U-Boot] [RFC PATCH] Add support for Micron MT29F8G08 8Gb NAND flash MID: 0x2c, DID: 0x38
micro1183
- [U-Boot] [PATCH 1/2] arm: omap: nand: introduce CONFIG_NAND_OMAP_SW_ECC_LEGACY
Gupta, Pekon
- [U-Boot] [RFC PATCH] Add support for Micron MT29F8G08 8Gb NAND flash MID: 0x2c, DID: 0x38
Scott Wood
- [U-Boot] Please pull u-boot-mpc85xx/master
Tom Rini
- [U-Boot] [PATCH 0/34] Switch over to real Kbuild
Masahiro Yamada
- [U-Boot] [PATCH][v3] powerpc/mpc85xx: Add support for single source clocking
Priyanka Jain
- [U-Boot] [PATCH] powerpc/t1040qds: Update DDR initialization related settings
Priyanka Jain
- [U-Boot] [PATCH] board/t1040qds: Relax IFC FPGA timings
Prabhakar Kushwaha
- [U-Boot] [PATCH v3] t2080qds/ddr: update ddr parameters
Shengzhou Liu
- [U-Boot] [PATCH v3] netbsd:fix documentation typo.
Kees Jongenburger
- [U-Boot] [PATCH 0/2] Add usb eth support
Minkyu Kang
- [U-Boot] [PATCH v5] arm: omap3: Add SPL support to cm_t35
Igor Grinberg
- [U-Boot] am335x: cpsw: optimize cpsw_recv to increase network performance
Stefan Roese
- [U-Boot] [RFC PATCH] Add support for Micron MT29F8G08 8Gb NAND flash MID: 0x2c, DID: 0x38
micro1183
- [U-Boot] [PATCH 1/2] arm: omap: nand: introduce CONFIG_NAND_OMAP_SW_ECC_LEGACY
Igor Grinberg
- [U-Boot] [PATCH 1/2] arm: omap: nand: introduce CONFIG_NAND_OMAP_SW_ECC_LEGACY
Gupta, Pekon
- [U-Boot] [PATCH] netbsd:fix documentation typo.
Sughosh Ganu
- [U-Boot] [PATCH v15] Introduced btrfs file-system with btrload command
Koen Kooi
- [U-Boot] [PATCH] netbsd:fix documentation typo.
Kees Jongenburger
- [U-Boot] [PATCH 2/2] exynos5: arndale: Add network support
Marek Vasut
- [U-Boot] [PATCH 0/2] Add usb eth support
Marek Vasut
- [U-Boot] [PATCH] ARM: DRA7xx: Change clk divider setting
Lokesh Vutla
- [U-Boot] [PATCH] ARM: OMAP5: clocks: Update MPU settings for OPP_NOM
Lokesh Vutla
- [U-Boot] [PATCH 1/2] arm: omap: nand: introduce CONFIG_NAND_OMAP_SW_ECC_LEGACY
Igor Grinberg
- [U-Boot] [PATCH] ARM: fix the standalone programs
Albert ARIBAUD
- [U-Boot] [PATCH v2 07/13] ARM: HYP/non-sec: allow relocation to secure RAM
Albert ARIBAUD
- [U-Boot] [PATCH 1/2] arm: omap: nand: introduce CONFIG_NAND_OMAP_SW_ECC_LEGACY
Nikita Kiryanov
- [U-Boot] [PATCH] arm: omap: nand: setup sw ecc size using default value
Nikita Kiryanov
- [U-Boot] [PATCH 0/2] Introduce CONFIG_NAND_OMAP_SW_ECC_LEGACY, and use it on cm_t35
Nikita Kiryanov
- [U-Boot] [PATCH] arm: omap: nand: setup sw ecc size using default value
Gupta, Pekon
- [U-Boot] am335x: cpsw: optimize cpsw_recv to increase network performance
Tom Rini
- [U-Boot] [PATCH] arm: omap: nand: setup sw ecc size using default value
Nikita Kiryanov
- [U-Boot] [PATCH V2] mtd: nand: omap: fix HAM1_SW ecc using default value for ecc.size
Nikita Kiryanov
- [U-Boot] am335x: cpsw: optimize cpsw_recv to increase network performance
Vladimir Koutny
- [U-Boot] [PATCH V2] mtd: nand: omap: fix HAM1_SW ecc using default value for ecc.size
Gupta, Pekon
- [U-Boot] am335x: cpsw: optimize cpsw_recv to increase network performance
Stefan Roese
- [U-Boot] am335x: cpsw: optimize cpsw_recv to increase network performance
Tom Rini
- [U-Boot] am335x: cpsw: optimize cpsw_recv to increase network performance
Stefan Roese
- [U-Boot] am335x: cpsw: optimize cpsw_recv to increase network performance
Tom Rini
- [U-Boot] am335x: cpsw: optimize cpsw_recv to increase network performance
Stefan Roese
- [U-Boot] [PATCH v3] netbsd:fix documentation typo.
Kees Jongenburger
- [U-Boot] [PATCH 1/1] arm: mx5: Add fuse supply gate enable in fsl_iim
Sergey Alyoshin
- [U-Boot] BCH8 support when we do not have ELM h/w engine.
Gupta, Pekon
- [U-Boot] [RFC PATCH] Add support for Micron MT29F8G08 8Gb NAND flash MID: 0x2c, DID: 0x38
Scott Wood
- [U-Boot] booting issue with Atmel SAMA5D31 Evaluation kit
Ron Eggler
- [U-Boot] [PATCH 0/34] Switch over to real Kbuild
Simon Glass
- [U-Boot] [PATCH 1/1] arm: mx5: Add fuse supply gate enable in fsl_iim
Benoît Thébaudeau
- [U-Boot] [PATCH 1/1] arm: mx5: Add fuse supply gate enable in fsl_iim
Benoît Thébaudeau
- [U-Boot] [PATCH 00/11 V10] EXYNOS5420: Add SMDK5420 board support
Rajeshwari Birje
- [U-Boot] [PATCH 1/1] arm: mx5: Add fuse supply gate enable in fsl_iim
Sergey Alyoshin
- [U-Boot] [PATCH] m68k:correct io macros about endian
Chao Fu
- [U-Boot] [PATCH 1/1] arm: mx5: Add fuse supply gate enable in fsl_iim
Sergey Alyoshin
- [U-Boot] [PATCH v2 1/4] spi:rewrite the Freescale DSPI driver.
Chao Fu
- [U-Boot] [PATCH v2 2/4] arm:vf610:Enable the DSPI for Freescale vf610 platform
Chao Fu
- [U-Boot] [PATCH v2 3/4] arm:vf610:vf610-twr:Enable the DSPI for Freesacale vf610-twr board
Chao Fu
- [U-Boot] [PATCH v2 4/4] mtd:vf610twr:add flash at26df081a for vf610twr platform
Chao Fu
- [U-Boot] [PATCH] serial/serial_arc - add driver for ARC UART
Alexey Brodkin
- [U-Boot] [PATCH] lib/time - fix "usec_to_tick" calculation for hi freq system timers
Alexey Brodkin
- [U-Boot] [PATCH] arm: use canonical sub mnemonic
Andreas Bießmann
- [U-Boot] SMDK5250 not booting on latest U-boot-samsung
Albert ARIBAUD
- [U-Boot] [PATCH] arm: put .hash, .got.plt and .machine_param back in binaries
Albert ARIBAUD
- [U-Boot] [PATCH] arm: use canonical sub mnemonic
Albert ARIBAUD
- [U-Boot] [PATCH] arm: put .hash, .got.plt and .machine_param back in binaries
Rajeshwari Birje
- [U-Boot] [PATCH] arm: put .hash, .got.plt and .machine_param back in binaries
Masahiro Yamada
- [U-Boot] how to limit sandbox to a single thread/core?
Abraham V.
- [U-Boot] [PATCH v3 1/4] mkexynosspl: fix uninitialized buffer
Albert ARIBAUD
- [U-Boot] [PATCH v1 0/2] mtd: nand: omap: booting from NAND using u-boot
Pekon Gupta
- [U-Boot] [PATCH v1 1/2] mtd: nand: omap: fix ecclayout->oobfree->offset
Pekon Gupta
- [U-Boot] [PATCH v1 2/2] mtd: nand: omap: fix ecclayout to be in sync with u-boot NAND driver
Pekon Gupta
- [U-Boot] [PATCH] arm: put .hash, .got.plt and .machine_param back in binaries
Albert ARIBAUD
- [U-Boot] booting issue with Atmel SAMA5D31 Evaluation kit
Andreas Bießmann
- [U-Boot] [PATCH v2 1/4] spi:rewrite the Freescale DSPI driver.
Jagan Teki
- [U-Boot] [PATCH v2 2/4] arm:vf610:Enable the DSPI for Freescale vf610 platform
Jagan Teki
- [U-Boot] [PATCH 1/1] arm: mx5: Add fuse supply gate enable in fsl_iim
Benoît Thébaudeau
- [U-Boot] [PATCH 1/1] arm: mx5: Add fuse supply gate enable in fsl_iim
Benoît Thébaudeau
- [U-Boot] [PATCH] cosmetic: sf: hex values are in lower case
Jagan Teki
- [U-Boot] Please pull u-boot-ti
Tom Rini
- [U-Boot] am33xx: Enable D-CACHE on !CONFIG_SYS_DCACHE_OFF
Tom Rini
- [U-Boot] ARM: OMAP4: Move TEXT_BASE down to non-HS limit
Tom Rini
- [U-Boot] [U-Boot,v5] arm: omap3: Add SPL support to cm_t35
Tom Rini
- [U-Boot] am335x_evm: Consolidate DFU environment parts into the DFU part of the file
Tom Rini
- [U-Boot] arm: am437: Fix offset for USB registers
Tom Rini
- [U-Boot] [U-Boot,1/4] arm: omap: abb: add missing include
Tom Rini
- [U-Boot] am335x, siemens boards: adapt default environment setting
Tom Rini
- [U-Boot] [U-Boot,v4] am3517_evm: activate Ethernet PHY
Tom Rini
- [U-Boot] arm: omap: cm_t35: update config file
Tom Rini
- [U-Boot] ARM: DRA7xx: Change clk divider setting
Tom Rini
- [U-Boot] ARM: OMAP5: clocks: Update MPU settings for OPP_NOM
Tom Rini
- [U-Boot] [U-Boot, v2, 1/5] arm, omap3: Add support for TechNexion modules
Tom Rini
- [U-Boot] [U-Boot, v2, 2/5] arm: omap3: Add SPL support to tao3530
Tom Rini
- [U-Boot] [U-Boot, v2, 3/5] arm: omap3: Remove bootargs mem_size handling
Tom Rini
- [U-Boot] [U-Boot, v2, 4/5] arm: omap3: Add board revision output to tao3530
Tom Rini
- [U-Boot] [U-Boot, v2, 5/5] arm: omap3: Add HEAD acoustics (HA) board variant omap3_ha to tao3530
Tom Rini
- [U-Boot] [PATCH] serial/serial_arc - add driver for ARC UART
Tom Rini
- [U-Boot] [PATCH] lib/time - fix "usec_to_tick" calculation for hi freq system timers
Tom Rini
- [U-Boot] [PATCH] serial/serial_arc - add driver for ARC UART
Alexey Brodkin
- [U-Boot] Please pull u-boot-ti
Albert ARIBAUD
- [U-Boot] [PATCH] serial/serial_arc - add driver for ARC UART
Tom Rini
- [U-Boot] Please pull u-boot-ti
Tom Rini
- [U-Boot] [PATCH] lib/time - fix "usec_to_tick" calculation for hi freq system timers
Tom Rini
- [U-Boot] [PATCH] lib/time - fix "usec_to_tick" calculation for hi freq system timers
Alexey Brodkin
- [U-Boot] Please pull u-boot-ti
Albert ARIBAUD
- [U-Boot] [PATCH v2 2/2] powerpc/c29xpcie: 8k page size NAND boot support base on TPL/SPL
Scott Wood
- [U-Boot] [PATCH] i2c: Fix i2c speed command
Darwin Rambo
- [U-Boot] booting issue with Atmel SAMA5D31 Evaluation kit
Ron Eggler
- [U-Boot] [PATCH v2 2/2] powerpc/c29xpcie: 8k page size NAND boot support base on TPL/SPL
Scott Wood
- [U-Boot] [PATCH 0/34] Switch over to real Kbuild
Simon Glass
- [U-Boot] [U-Boot v2] [PATCH] rsa: add a more flexible way to support different hash algorithms (e.g. sha256)
Simon Glass
- [U-Boot] [PATCH v3 1/2] powerpc:mpc85xx: Add ifc nand boot support for TPL/SPL
Po Liu
- [U-Boot] [PATCH v3 2/2] powerpc/c29xpcie: 8k page size NAND boot support base on TPL/SPL
Po Liu
- [U-Boot] [PATCH v2 2/2] powerpc/c29xpcie: 8k page size NAND boot support base on TPL/SPL
Scott Wood
- [U-Boot] [PATCH v16 00/10] arm64 patch
fenghua at phytium.com.cn
- [U-Boot] [PATCH v16 01/10] fdt_support: 64bit initrd start address support
fenghua at phytium.com.cn
- [U-Boot] [PATCH v16 02/10] cmd_pxe: remove compiling warnings
fenghua at phytium.com.cn
- [U-Boot] [PATCH v16 03/10] add weak entry definition
fenghua at phytium.com.cn
- [U-Boot] [PATCH v16 04/10] arm64: Add tool to statically apply RELA relocations
fenghua at phytium.com.cn
- [U-Boot] [PATCH v16 05/10] arm64: Turn u-boot.bin back into an ELF file after relocate-rela
fenghua at phytium.com.cn
- [U-Boot] [PATCH v16 06/10] arm64: Make checkarmreloc accept arm64 relocations
fenghua at phytium.com.cn
- [U-Boot] [PATCH v16 07/10] arm64: core support
fenghua at phytium.com.cn
- [U-Boot] [PATCH v16 08/10] arm64: generic board support
fenghua at phytium.com.cn
- [U-Boot] [PATCH v16 09/10] arm64: board support of vexpress_aemv8a
fenghua at phytium.com.cn
- [U-Boot] [PATCH v16 10/10] arm64: MAKEALL, filter armv8 boards from LIST_arm
fenghua at phytium.com.cn
- [U-Boot] [PATCH] ARM: bcm2835: fix mailbox timeout
Stephen Warren
- [U-Boot] [PATCH] i2c: Fix i2c speed command
Jagan Teki
- [U-Boot] [PATCH 1/4] ARM: armv7: Make indirect vector addresses globl
Marek Vasut
- [U-Boot] [PATCH V2 2/4] ARM: mx6: Add PCI express clock configuration
Marek Vasut
- [U-Boot] [PATCH V2 3/4] ARM: mx6: Add PCI express driver
Marek Vasut
- [U-Boot] [PATCH V2 4/4] ARM: mx6: Enable PCIe on Sabrelite
Marek Vasut
- [U-Boot] [PATCH 1/3] usb: ehci-pci: Clarify and cleanup the EHCI controller detection
Marek Vasut
- [U-Boot] [PATCH 2/3] usb: ehci: Do not de-init uninited controllers
Marek Vasut
- [U-Boot] [PATCH 3/3] usb: ehci: Fix register access
Marek Vasut
- [U-Boot] [PATCH v16 02/10] cmd_pxe: remove compiling warnings
Jagan Teki
- [U-Boot] [PATCH v3 1/4] mkexynosspl: fix uninitialized buffer
Minkyu Kang
- [U-Boot] [PATCH v16 04/10] arm64: Add tool to statically apply RELA relocations
Jagan Teki
- [U-Boot] mtd: nand: oob data structures taking up a lot of space
Aaron Williams
- [U-Boot] [PATCH V2 2/4] ARM: mx6: Add PCI express clock configuration
Jagan Teki
- [U-Boot] [PATCH V2 3/4] ARM: mx6: Add PCI express driver
Jagan Teki
- [U-Boot] [PATCH V3 2/4] ARM: mx6: Add PCI express clock configuration
Marek Vasut
- [U-Boot] [PATCH V2 3/4] ARM: mx6: Add PCI express driver
Marek Vasut
- [U-Boot] [PATCH 0/4] fix and update LP-8x4x to boot DTS kernel
Sergei Ianovich
- [U-Boot] [PATCH 1/4] ARM: pxa: prevent PXA270 occasional reboot freezes
Sergei Ianovich
- [U-Boot] [PATCH 2/4] arm: pxa: always init ethaddr for LP-8x4x
Sergei Ianovich
- [U-Boot] [PATCH 3/4] arm: pxa: fix 2nd flash chip address on LP-8x4x
Sergei Ianovich
- [U-Boot] [PATCH 4/4] arm: pxa: update LP-8x4x to boot DTS kernel
Sergei Ianovich
- [U-Boot] [PATCH V2 3/4] ARM: mx6: Add PCI express driver
Jagan Teki
- [U-Boot] [PATCH V3 2/4] ARM: mx6: Add PCI express clock configuration
Jagan Teki
- [U-Boot] [PATCH v3 1/4] mkexynosspl: fix uninitialized buffer
Albert ARIBAUD
- [U-Boot] [PATCH V2 3/4] ARM: mx6: Add PCI express driver
Marek Vasut
- [U-Boot] [PATCH 1/4] ARM: pxa: prevent PXA270 occasional reboot freezes
Marek Vasut
- [U-Boot] [PATCH 2/4] arm: pxa: always init ethaddr for LP-8x4x
Marek Vasut
- [U-Boot] [PATCH 4/4] arm: pxa: update LP-8x4x to boot DTS kernel
Marek Vasut
- [U-Boot] [PATCH 2/2] exynos5: arndale: Add network support
Inderpal Singh
- [U-Boot] [PATCH 2/2] exynos5: arndale: Add network support
Marek Vasut
- [U-Boot] [PATCH 2/2] exynos5: arndale: Add network support
Inderpal Singh
- [U-Boot] [PATCH 1/4] ARM: pxa: prevent PXA270 occasional reboot freezes
Sergei Ianovich
- [U-Boot] [PATCH 2/4] arm: pxa: always init ethaddr for LP-8x4x
Sergei Ianovich
- [U-Boot] [PATCH 4/4] arm: pxa: update LP-8x4x to boot DTS kernel
Sergei Ianovich
- [U-Boot] Improve upstream support for Snowball board
Roy Spliet
- [U-Boot] [PATCH 1/2] snowball: Add networking support
Roy Spliet
- [U-Boot] [PATCH 2/2] snowball: Enable FDT
Roy Spliet
- [U-Boot] [PATCH 4/4] arm: pxa: update LP-8x4x to boot DTS kernel
Marek Vasut
- [U-Boot] [PATCH 1/2] snowball: Add networking support
Jagan Teki
- [U-Boot] [PATCH 2/2] snowball: Enable FDT
Jagan Teki
- [U-Boot] [PATCH 2/4] arm: pxa: always init ethaddr for LP-8x4x
Marek Vasut
- [U-Boot] [PATCH 1/4] ARM: pxa: prevent PXA270 occasional reboot freezes
Marek Vasut
- [U-Boot] [PATCH 2/2] exynos5: arndale: Add network support
Marek Vasut
- [U-Boot] [PATCH 2/4] arm: pxa: always init ethaddr for LP-8x4x
Sergei Ianovich
- [U-Boot] [PATCH 2/4] arm: pxa: always init ethaddr for LP-8x4x
Marek Vasut
- [U-Boot] [PATCH 1/4] ARM: pxa: prevent PXA270 occasional reboot freezes
Sergei Ianovich
- [U-Boot] [PATCH 2/4] arm: pxa: always init ethaddr for LP-8x4x
Sergei Ianovich
- [U-Boot] [PATCH 1/2] snowball: Add networking support
Roy Spliet
- [U-Boot] [PATCH 1/4] ARM: pxa: prevent PXA270 occasional reboot freezes
Marek Vasut
- [U-Boot] [PATCH 2/4] arm: pxa: always init ethaddr for LP-8x4x
Marek Vasut
- [U-Boot] [PATCH V3 00/14] ARM: AM43xx: Update support for AM4372 SoC
Vaibhav Bedia
- [U-Boot] [PATCH 2/4] arm: pxa: always init ethaddr for LP-8x4x
Sergei Ianovich
- [U-Boot] [PATCH 1/4] ARM: pxa: prevent PXA270 occasional reboot freezes
Sergei Ianovich
- [U-Boot] [PATCH 4/4] arm: pxa: update LP-8x4x to boot DTS kernel
Sergei Ianovich
- [U-Boot] [PATCH 1/4] ARM: pxa: prevent PXA270 occasional reboot freezes
Marek Vasut
- [U-Boot] [PATCH 2/4] arm: pxa: always init ethaddr for LP-8x4x
Marek Vasut
- [U-Boot] [PATCH 4/4] arm: pxa: update LP-8x4x to boot DTS kernel
Marek Vasut
- [U-Boot] [PATCH 2/2] vexpress: Add vexpress qemu variant
Ian Campbell
- [U-Boot] [PATCH 2/2] vexpress: Add vexpress qemu variant
Michael Trimarchi
- [U-Boot] [PATCH 2/4] arm: pxa: always init ethaddr for LP-8x4x
Sergei Ianovich
- [U-Boot] [PATCH 4/4] arm: pxa: update LP-8x4x to boot DTS kernel
Sergei Ianovich
- [U-Boot] [PATCH 4/4] arm: pxa: update LP-8x4x to boot DTS kernel
Marek Vasut
- [U-Boot] booting issue with Atmel SAMA5D31 Evaluation kit
Ron Eggler
- [U-Boot] [PATCH v6] spi: Add support SH Quad SPI driver
Nobuhiro Iwamatsu
- [U-Boot] [PATCH v3 1/4] mkexynosspl: fix uninitialized buffer
Minkyu Kang
- [U-Boot] [PATCH 1/7 V4] mmc: Add some usefull macro definition
Haijun.Zhang at freescale.com
- [U-Boot] booting issue with Atmel SAMA5D31 Evaluation kit
Bo Shen
- [U-Boot] booting issue with Atmel SAMA5D31 Evaluation kit
Ron Eggler
- [U-Boot] booting issue with Atmel SAMA5D31 Evaluation kit
Bo Shen
- [U-Boot] Pull request: u-boot-blackfin
Sonic Zhang
- [U-Boot] booting issue with Atmel SAMA5D31 Evaluation kit
Shen, Voice
- [U-Boot] [PATCH v2 2/4] arm:vf610:Enable the DSPI for Freescale vf610 platform
Chao Fu
- [U-Boot] [PATCH] Makefile: fix the typo error for mrproper
Bo Shen
- [U-Boot] [PATCH v6] spi: Add support SH Quad SPI driver
Jagan Teki
- [U-Boot] [PATCH v3 1/4] mkexynosspl: fix uninitialized buffer
Rajeshwari Birje
- [U-Boot] [PATCH] ARM: bcm2835: fix mailbox timeout
Andre Heider
- [U-Boot] [PATCH v6] spi: Add support SH Quad SPI driver
Nobuhiro Iwamatsu
- [U-Boot] [PATCH 00/11 V11] EXYNOS5420: Add SMDK5420 board support
Rajeshwari S Shinde
- [U-Boot] [PATCH 01/11 V11] EXYNOS5: Create a common board file
Rajeshwari S Shinde
- [U-Boot] [PATCH 02/11 V11] Exynos5420: Add base addresses for 5420
Rajeshwari S Shinde
- [U-Boot] [PATCH 03/11 V11] EXYNOS5420: Add power register structure.
Rajeshwari S Shinde
- [U-Boot] [PATCH 04/11 V11] EXYNOS5420: Add dmc and phy_control register structure
Rajeshwari S Shinde
- [U-Boot] [PATCH 05/11 V11] Exynos5420: Add clock initialization for 5420
Rajeshwari S Shinde
- [U-Boot] [PATCH 06/11 V11] Exynos5420: Add DDR3 initialization for 5420
Rajeshwari S Shinde
- [U-Boot] [PATCH 07/11 V11] Exynos5420: Add support for 5420 in pinmux and gpio
Rajeshwari S Shinde
- [U-Boot] [PATCH 08/11 V11] Exynos5420: Add base patch for SMDK5420
Rajeshwari S Shinde
- [U-Boot] [PATCH 09/11 V11] DTS: Add dts support for SMDK5420
Rajeshwari S Shinde
- [U-Boot] [PATCH 10/11 V11] Config: Add initial config for SMDK5420
Rajeshwari S Shinde
- [U-Boot] [PATCH 11/11 V11] SPL: EXYNOS: Prepare for variable size SPL support
Rajeshwari S Shinde
- [U-Boot] [PATCH 0/34] Switch over to real Kbuild
Masahiro Yamada
- [U-Boot] [PATCH 0/34] Switch over to real Kbuild
Masahiro Yamada
- [U-Boot] [PATCH] drivers/designware_i2c - add suppor of CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW
Alexey Brodkin
- No subject
- No subject
- No subject
- No subject
- No subject
- No subject
- No subject
- No subject
- [U-Boot] [RFC] mmc: add setdsr support
Markus Niebel
- [U-Boot] [RFC] mmc: add setdsr support
Pantelis Antoniou
- [U-Boot] [PATCH V2] mmc: add setdsr support
Markus Niebel
- [U-Boot] [PATCH V2] mmc: add setdsr support
Pantelis Antoniou
- [U-Boot] PowerPC: merge commonly-defined flags
Tom Rini
- [U-Boot] [U-Boot, v2] .gitignore: ignore spl/ and tpl/ directories except spl/Makefile
Tom Rini
- [U-Boot] board_f: explicitly disable console on early boot
Tom Rini
- [U-Boot] Makefile: delete a make rule of $(LDSCRIPT)
Tom Rini
- [U-Boot] [U-Boot, 1/2] post: descend only when CONFIG_HAS_POST is defined
Tom Rini
- [U-Boot] [U-Boot, 2/2] Makefile: Select objects by CONFIG_ rather than $(ARCH) or $(CPU)
Tom Rini
- [U-Boot] drivers/usb/gadget: select objects by obj-$(CONFIG-...)
Tom Rini
- [U-Boot] drivers/mtd: descend into sub directories only when it is necessary
Tom Rini
- [U-Boot] Makefile: Move some scripts imported from Linux
Tom Rini
- [U-Boot] Makefile: delete unnecessary CPPFLAGS settings
Tom Rini
- [U-Boot] [U-Boot, v3, 2/5] common/config_defaults.h: make CONFIG_BOOTM_VXWORKS default configuration
Tom Rini
- [U-Boot] [U-Boot, v3, 3/5] common/cmd_bootm: extend do_bootm_vxworks to support the new VxWorks boot interface.
Tom Rini
- [U-Boot] [U-Boot, v3, 4/5] common/fdt_support.c: avoid unintended return from fdt_fixup_memory_banks()
Tom Rini
- [U-Boot] [U-Boot, v3, 5/5] README.vxworks: add a document describing the new VxWorks boot interface
Tom Rini
- [U-Boot] Makefile: delete unnecessary lines
Tom Rini
- [U-Boot] serial: lpc32xx: send CR before LF
Tom Rini
- [U-Boot] [U-Boot, RFC] kgdb: configs: remove obsolete CONFIG_KGDB_SER_INDEX
Tom Rini
- [U-Boot] [U-Boot, v2, 1/4] mkimage: added 'static' specifier to match function's prototype.
Tom Rini
- [U-Boot] [U-Boot, v2, 2/4] tools: moved code common to all image tools to a separated module.
Tom Rini
- [U-Boot] [U-Boot, v2, 3/4] Add dumpimage, a tool to extract data from U-Boot images
Tom Rini
- [U-Boot] [U-Boot,v2,4/4] sandbox: dumpimage: Test dumpimage
Tom Rini
- [U-Boot] [U-Boot, v2] Makefile: Do not create empty autoconf.mk on error
Tom Rini
- [U-Boot] [U-Boot, v2] Makefile: use two double-quotations as a pair
Tom Rini
- [U-Boot] Makefile: correct dependencies of asm-offsets.[hs]
Tom Rini
- [U-Boot] time: fix usec_to_tick()
Tom Rini
- [U-Boot] [U-Boot,2/5] ARM:zynq: Correct __udelay to use lldiv
Tom Rini
- [U-Boot] [U-Boot, 3/5] ARM:PXA: Correct tick_to_time / us_to_tick to use lldiv
Tom Rini
- [U-Boot] [U-Boot, 4/5] JFFS2: Correct jffs2_1pass_build_lists to use lldiv
Tom Rini
- [U-Boot] [U-Boot,5/5] yaffs2: Use lldiv for 64bit division
Tom Rini
- [U-Boot] [U-Boot,1/2] examples: x86: delete 82559_eeprom
Tom Rini
- [U-Boot] [U-Boot, 2/2] Makefile, .gitignore: Cleanup non-existing binaries
Tom Rini
- [U-Boot] spl/Makefile: merge LIBS-y += arch/$(ARCH)/imx-common
Tom Rini
- [U-Boot] [U-Boot,v3] netbsd:fix documentation typo.
Tom Rini
- [U-Boot] Correct vxWorks elf boot to load at correct address
Tom Rini
- [U-Boot] [U-Boot, v3, 1/5] common/cmd_bootm.c: seperate do_bootm_vxworks related code from CONFIG_CMD_ELF.
Tom Rini
- [U-Boot] Pull request: u-boot-blackfin
Tom Rini
- [U-Boot] Pull request: u-boot-video/master
Anatolij Gustschin
- [U-Boot] [PATCH] nand_util.c: Use '%ld' for length in nand_unlock debug print
Tom Rini
- [U-Boot] [PATCH] mmc: add setdsr support
Pantelis Antoniou
- [U-Boot] [PATCH] mmc: add setdsr support
Markus Niebel
- [U-Boot] [PATCH] nand_util.c: Use '%ld' for length in nand_unlock debug print
Tom Rini
- [U-Boot] [PATCH v2] nand_util.c: Use '%zd' for length in nand_unlock debug print
Tom Rini
- [U-Boot] [PATCH 0/2 v2] socfpga: Adding Scan Manager
Chin Liang See
- [U-Boot] [PATCH] Makefile: fix the typo error for mrproper
Simon Glass
- [U-Boot] [PATCH 2/2] vexpress: Add vexpress qemu variant
Albert ARIBAUD
- [U-Boot] [PATCH] Makefile: fix the typo error for mrproper
Tom Rini
- [U-Boot] Pull request: u-boot-video/master
Tom Rini
- [U-Boot] [PATCH v2 01/12] TI:armv7: Change CONFIG_SPL_STACK to not be CONFIG_SYS_INIT_SP_ADDR
Tom Rini
- [U-Boot] [PATCH] Makefile: fix the typo error for mrproper
Simon Glass
- [U-Boot] toolchain problems when building iMX6 mx6qsabreauto (and another bootloader tool)
Stefano Babic
- [U-Boot] [PATCH 0/2] omap_gpmc nand ecc switch bug fixes
Nikita Kiryanov
- [U-Boot] [PATCH 1/2] mtd: nand: omap: fix sw->hw->sw ecc switch
Nikita Kiryanov
- [U-Boot] [PATCH 2/2] mtd: nand: omap: fix ecc ops assignment when changing ecc
Nikita Kiryanov
- [U-Boot] [ANN] v2014.01-rc2
Tom Rini
- [U-Boot] [PATCH v16 04/10] arm64: Add tool to statically apply RELA relocations
Scott Wood
- [U-Boot] [PATCH v2] nand_util.c: Use '%zd' for length in nand_unlock debug print
Scott Wood
- [U-Boot] [PATCH] ARM: tegra: accept any SKU ID for most chips
Stephen Warren
- [U-Boot] [U-boot] the relationship between CONFIG_LCD / CONFIG_VIDEO / CONFIG_CFB_CONSOLE
Simon Glass
- [U-Boot] how to limit sandbox to a single thread/core?
Simon Glass
- [U-Boot] [PATCH v3 0/8] Pending patches for merging
Otavio Salvador
- [U-Boot] [PATCH v3 1/8] wandboard: add Future Eletronics 7" WVGA LCD extension board
Otavio Salvador
- [U-Boot] [PATCH v3 2/8] mx6sabresd: Add eMMC specific environment to allow U-Boot update
Otavio Salvador
- [U-Boot] [PATCH v3 3/8] imx: Easy enabling of SION per-pin using MUX_MODE_SION helper macro
Otavio Salvador
- [U-Boot] [PATCH v3 4/8] mx28evk: Use 512k for fdt partition to align it
Otavio Salvador
- [U-Boot] [PATCH v3 5/8] mx28evk: Add 'nandboot' environment command
Otavio Salvador
- [U-Boot] [PATCH v3 6/8] mx28evk: Extend environment to easy write of NAND system
Otavio Salvador
- [U-Boot] [PATCH v3 7/8] ARM: mx6: Change the FDT loading address to avoid overlaping
Otavio Salvador
- [U-Boot] [PATCH v3 8/8] ARM: mx6: Allow enablement of FEC Anatop based clock for all MX6
Otavio Salvador
- [U-Boot] [PATCH REPOST2] spi: tegra: clear RDY bit prior to every transfer
Stephen Warren
- [U-Boot] [PATCH 2/2] mtd: nand: omap: fix ecc ops assignment when changing ecc
Scott Wood
- [U-Boot] [U-boot] the relationship between CONFIG_LCD / CONFIG_VIDEO / CONFIG_CFB_CONSOLE
TigerLiu at viatech.com.cn
- [U-Boot] [PATCH v2 0/5] fix and update LP-8x4x to boot DT kernel
Sergei Ianovich
- [U-Boot] [PATCH v2 1/5] ARM: pxa: prevent PXA270 occasional reboot freezes
Sergei Ianovich
- [U-Boot] [PATCH v2 2/5] arm: pxa: fix LP-8x4x USB support
Sergei Ianovich
- [U-Boot] [PATCH v2 3/5] arm: pxa: fix 2nd flash chip address on LP-8x4x
Sergei Ianovich
- [U-Boot] [PATCH v2 4/5] arm: pxa: update LP-8x4x to boot DT kernel
Sergei Ianovich
- [U-Boot] [PATCH v2 5/5] arm: pxa: init ethaddr for LP-8x4x using DT
Sergei Ianovich
- [U-Boot] [PATCH 4/4] arm: pxa: update LP-8x4x to boot DTS kernel
Sergei Ianovich
- [U-Boot] [PATCH 1/3] sh: add support for sh7753evb board instead of sh7752evb
Shimoda, Yoshihiro
- [U-Boot] [PATCH 2/3] net: sh-eth: add support for SH7753 instead of SH7752
Shimoda, Yoshihiro
- [U-Boot] [PATCH 3/3] serial_sh: add support for the SH7753 instead of SH7752
Shimoda, Yoshihiro
- [U-Boot] [PATCH v2 3/4] Add dumpimage, a tool to extract data from U-Boot images
Masahiro Yamada
- [U-Boot] examples: add again x86 standalone example
Masahiro Yamada
- [U-Boot] how to limit sandbox to a single thread/core?
Abraham V.
- [U-Boot] [PATCH][v2] powerpc/t1040qds: Update DDR initialization related settings
Priyanka Jain
- [U-Boot] [RFC v2] implementation of generic distro configs
Dennis Gilmore
- [U-Boot] [PATCH 1/6] cmd_pxe.c add any option for filesystem with sysboot uses generic load
Dennis Gilmore
- [U-Boot] [PATCH 2/6] add a generic set of configs to enable Distros to more easier support u-boot based systems
Dennis Gilmore
- [U-Boot] [PATCH 3/6] port andboard to use generic distro config
Dennis Gilmore
- [U-Boot] [PATCH 4/6] port am335x_evm to use generic distro configs
Dennis Gilmore
- [U-Boot] [PATCH 5/6] port beagleboard to use generic distro configs
Dennis Gilmore
- [U-Boot] [PATCH 6/6] port omap4 boards to use generic distro configs
Dennis Gilmore
- [U-Boot] Please pull u-boot-ti
Wolfgang Denk
- [U-Boot] [ANN] v2014.01-rc2
Wolfgang Denk
- [U-Boot] [PATCH v2] arm: mx5: Add fuse supply enable in fsl_iim
Sergey Alyoshin
- [U-Boot] [PATCH][v4] powerpc/mpc85xx: Add support for single source clocking
Priyanka Jain
- [U-Boot] [PATCH 1/3] arm: atmel: at91sam9x5: cleanup cs configure for spi
Andreas Bießmann
- [U-Boot] [PATCH 0/3] arm: atmel: clean up for at91sam9x5ek board
Andreas Bießmann
- [U-Boot] [PATCH v2 1/3] arm: atmel: at91sam9x5: cleanup cs configure for spi
Bo Shen
- [U-Boot] [PATCH 0/3] arm: atmel: clean up for at91sam9x5ek board
Bo Shen
- [U-Boot] [PATCH 0/3] arm: atmel: clean up for at91sam9x5ek board
Bo Shen
- [U-Boot] [PATCH v2] arm: mx5: Add fuse supply enable in fsl_iim
Benoît Thébaudeau
- [U-Boot] [PATCH] arm: omap3: Fix beagleboard SPL boot hangup (GPIO clocks not enabled)
Stefan Roese
- [U-Boot] [PATCH] arm: omap3: Add cmdline editing feature
Stefan Roese
- [U-Boot] [PATCH 2/2] mtd: nand: omap: fix ecc ops assignment when changing ecc
Nikita Kiryanov
- [U-Boot] [PATCH V2 2/2] mtd: nand: omap: fix ecc ops assignment when changing ecc
Nikita Kiryanov
- [U-Boot] [PATCH v2] arm: ep9315: Return back Cirrus Logic EDB9315A board support
sergey kostanbaev
- [U-Boot] [PATCH v3] arm: ep9315: Return back Cirrus Logic EDB9315A board support
sergey.kostanbaev
- [U-Boot] i.MX6 freeze when running Linux FSL 3.10.9-1.0.0-alpha AND U-Boot 2013.10
Fabio Estevam
- [U-Boot] i.MX6 freeze when running Linux FSL 3.10.9-1.0.0-alpha AND U-Boot 2013.10
Fabio Estevam
- [U-Boot] [PATCH v3] arm: mx5: Add fuse supply enable in fsl_iim
Sergey Alyoshin
- [U-Boot] "arm: keep all sections in ELF file" breaks Arndale
Andre Przywara
- [U-Boot] "arm: keep all sections in ELF file" breaks Arndale
Tom Rini
- [U-Boot] [PATCH] arm: omap3: Add cmdline editing feature
Tom Rini
- [U-Boot] [PATCH v3] arm: mx5: Add fuse supply enable in fsl_iim
Benoît Thébaudeau
- [U-Boot] "arm: keep all sections in ELF file" breaks Arndale
Andre Przywara
- [U-Boot] "arm: keep all sections in ELF file" breaks Arndale
Tom Rini
- [U-Boot] [PATCH 1/2] i.MX6 (DQ/DLS): use macros for mux and pad declarations
Stefano Babic
- [U-Boot] [U-Boot,v2,1/3] arm: atmel: at91sam9x5: cleanup cs configure for spi
Andreas Bießmann
- [U-Boot] [U-Boot,2/3] arm: atmel: at91sam9x5: cleanup unneeded undef
Andreas Bießmann
- [U-Boot] [U-Boot, 3/3] arm: atmel: at91sam9x5: move CONFIG_SYS_NO_FLASH to proper position
Andreas Bießmann
- [U-Boot] [PULL] u-boot-atmel/master -> u-boot-arm/master
Andreas Bießmann
- [U-Boot] [PATCH v4 0/1] nitrogen6x: Move setup_sata to common part
Stefano Babic
- [U-Boot] [PATCH v4 1/1] udoo: Add SATA support on uDoo Board.
Stefano Babic
- [U-Boot] [PATCH] configs: imx: Remove CONFIG_SYS_SPD_BUS_NUM option
Stefano Babic
- [U-Boot] [PATCH] ARM: mx6: Update non-Freescale boards to include CPU errata.
Stefano Babic
- [U-Boot] [PATCH 1/1] MX6 SabreSD: Use readl() to read the CCM_CCGR3 register
Stefano Babic
- [U-Boot] [PATCH] ARM: mx53: video: Add IPUv3 LCD support for M53EVK
Stefano Babic
- [U-Boot] [PATCH v2] mx6: clock: Fix the calculation of PLL_ENET frequency
Stefano Babic
- [U-Boot] [PATCH v3 1/2] mx6sabresd: Allow probing HSYNC, VSYNC and DISP_CLK signals
Stefano Babic
- [U-Boot] [PATCH v3 2/2] mx6sabresd: Fix LVDS width and color format
Stefano Babic
- [U-Boot] [PATCH] ARM: mxs: tools: Fix errno handling in strtoul() invocation
Stefano Babic
- [U-Boot] [PATCH 1/1] imx6: fix random hang when download by usb
Stefano Babic
- [U-Boot] [PATCH 1/2] powerpc/P1022DS: Define new nand_ecclayout structure macros
York Sun
- [U-Boot] [PATCH 2/2] powerpc/B4860QDS: Define new nand_ecclayout structure macros
York Sun
- [U-Boot] [PATCH v4] arm: mx5: Add fuse supply enable in fsl_iim
Sergey Alyoshin
- [U-Boot] [PATCH v4] arm: mx5: Add fuse supply enable in fsl_iim
Benoît Thébaudeau
- [U-Boot] [PATCH 1/2] doc: README.fuse: Add an example on how to use the fuse API on mx6q
Fabio Estevam
- [U-Boot] [PATCH 2/2] mx6sabre_common.h: Add CONFIG_CMD_FUSE support
Fabio Estevam
- [U-Boot] [PATCH 1/2] doc: README.fuse: Add an example on how to use the fuse API on mx6q
Benoît Thébaudeau
- [U-Boot] [PATCH 2/2] mx6sabre_common.h: Add CONFIG_CMD_FUSE support
Benoît Thébaudeau
- [U-Boot] how to limit sandbox to a single thread/core?
Simon Glass
- [U-Boot] [PATCH v2 3/4] Add dumpimage, a tool to extract data from U-Boot images
Simon Glass
- [U-Boot] mtd: nand: omap: fix ecc-layout for HAM1 ecc-scheme
Scott Wood
- [U-Boot] mtd: nand: omap_gpmc: cosmetic: Fix indentation
Scott Wood
- [U-Boot] [U-Boot, V2] mtd: nand: omap: fix HAM1_SW ecc using default value for ecc.size
Scott Wood
- [U-Boot] [U-Boot, v2] nand_util.c: Use '%zd' for length in nand_unlock debug print
Scott Wood
- [U-Boot] [U-Boot, 1/2] mtd: nand: omap: fix sw->hw->sw ecc switch
Scott Wood
- [U-Boot] [U-Boot, V2, 2/2] mtd: nand: omap: fix ecc ops assignment when changing ecc
Scott Wood
- [U-Boot] [PATCH 1/3] sh: add support for sh7753evb board instead of sh7752evb
Nobuhiro Iwamatsu
- [U-Boot] [PATCH REPOST2] ARM: rpi_b: power on SDHCI and USB HW modules
Stephen Warren
- [U-Boot] [PATCH 1/3] sh: add support for sh7753evb board instead of sh7752evb
Shimoda, Yoshihiro
- [U-Boot] [PATCH] powerpc/t208x: fix macro CONFIG_SYS_FSL_NUM_USB_CTRLS
Shengzhou Liu
- [U-Boot] [PATCH v2 3/4] Add dumpimage, a tool to extract data from U-Boot images
Masahiro Yamada
- [U-Boot] mtd: nand: oob data structures taking up a lot of space
Scott Wood
- [U-Boot] [PATCH] powerpc/cms700: limit NAND data structure size
Scott Wood
- [U-Boot] [PATCH 1/3] sh: add support for sh7753evb board instead of sh7752evb
Nobuhiro Iwamatsu
- [U-Boot] [PATCH 00/11 V11] EXYNOS5420: Add SMDK5420 board support
Rajeshwari Birje
- [U-Boot] [PATCH v2 0/35] Switch over to real Kbuild
Masahiro Yamada
- [U-Boot] [PATCH v2 01/35] .gitignore: ingore files generated by Kbuild
Masahiro Yamada
- [U-Boot] [PATCH v2 02/35] Makefile.host.tmp: add a new script to refactor tools
Masahiro Yamada
- [U-Boot] [PATCH v2 03/35] tools: convert makefiles to kbuild style
Masahiro Yamada
- [U-Boot] [PATCH v2 04/35] board: samsung: refactor host programs
Masahiro Yamada
- [U-Boot] [PATCH v2 05/35] examples: Use scripts/Makefile.build
Masahiro Yamada
- [U-Boot] [PATCH v2 06/35] nand-spl: Use scripts/Makefile.build
Masahiro Yamada
- [U-Boot] [PATCH v2 07/35] Makfile: move suffix rules to Makefile.build
Masahiro Yamada
- [U-Boot] [PATCH v2 08/35] Makefile: move some variable definitions to the top Makefile
Masahiro Yamada
- [U-Boot] [PATCH v2 09/35] Makefile: move BFD_ROOT_DIR to tools/gdb/Makefile
Masahiro Yamada
- [U-Boot] [PATCH v2 10/35] Kbuild: import Kbuild.include from linux v3.12 tag
Masahiro Yamada
- [U-Boot] [PATCH v2 11/35] Kbuild: Use Kbuild.include
Masahiro Yamada
- [U-Boot] [PATCH v2 12/35] Makefile: move more flags to the top Makefile
Masahiro Yamada
- [U-Boot] [PATCH v2 13/35] Makefile: refactor include path settings
Masahiro Yamada
- [U-Boot] [PATCH v2 14/35] Makefile: move more stuff to top Makefile
Masahiro Yamada
- [U-Boot] [PATCH v2 15/35] Makefile: move some flags to spl/Makefile
Masahiro Yamada
- [U-Boot] [PATCH v2 16/35] Makefile: move some flags to examples makefiles
Masahiro Yamada
- [U-Boot] [PATCH v2 17/35] Kbuild: change out-of-tree building
Masahiro Yamada
- [U-Boot] [PATCH v2 18/35] Kbuild: add dummy obj-y to create built-in.o
Masahiro Yamada
- [U-Boot] [PATCH v2 19/35] Makefile: rename scripts/Makefile.build to scripts/Makefile.build.tmp
Masahiro Yamada
- [U-Boot] [PATCH v2 20/35] Kbuild: import more build scripts from Linux v3.12 tag
Masahiro Yamada
- [U-Boot] [PATCH v2 21/35] Kbuild: use Linux Kernel build scripts
Masahiro Yamada
- [U-Boot] [PATCH v2 22/35] Kbuild: delete temporary build scripts
Masahiro Yamada
- [U-Boot] [PATCH v2 23/35] Kbuild: move some lines to more suitable place
Masahiro Yamada
- [U-Boot] [PATCH v2 24/35] Kbuild: convert some make rules to Kbuild style
Masahiro Yamada
- [U-Boot] [PATCH v2 25/35] Kbuild: move include directives of board configuration files
Masahiro Yamada
- [U-Boot] [PATCH v2 26/35] Kbuild: generate {spl, tpl}-autoconf.mk only when it is necessary
Masahiro Yamada
- [U-Boot] [PATCH v2 27/35] Makefile: remove a cleaning target "tidy"
Masahiro Yamada
- [U-Boot] [PATCH v2 28/35] Kbuild: change the top Makefile to more Kbuild-ish structure
Masahiro Yamada
- [U-Boot] [PATCH v2 29/35] examples: move api/ and standalone/ to examples/Makefile
Masahiro Yamada
- [U-Boot] [PATCH v2 30/35] Kbuild: refactor Makefile and spl/Makefile more
Masahiro Yamada
- [U-Boot] [PATCH v2 31/35] Makefile: Do not pass MTD_VERSION from the top Makefile
Masahiro Yamada
- [U-Boot] [PATCH v2 32/35] Makefile: refactor tools-all targets
Masahiro Yamada
- [U-Boot] [PATCH v2 33/35] Kbuild: use scripts/Makefile.clean
Masahiro Yamada
- [U-Boot] [PATCH v2 34/35] Kbuild: support simultaneous board configuration and "make all"
Masahiro Yamada
- [U-Boot] [PATCH v2 35/35] Kbuild: check clean source and generate Makefile for out-of-tree build
Masahiro Yamada
- [U-Boot] [PATCH v7] spi: Add support SH Quad SPI driver
Nobuhiro Iwamatsu
- [U-Boot] [PATCH v2 0/35] Switch over to real Kbuild
Masahiro Yamada
- [U-Boot] [PATCH 1/3 v2] sh: add support for sh7753evb board
Shimoda, Yoshihiro
- [U-Boot] [PATCH 2/3 v2] net: sh-eth: add support for SH7753
Shimoda, Yoshihiro
- [U-Boot] [PATCH 3/3 v2] serial_sh: add support for SH7753
Shimoda, Yoshihiro
- [U-Boot] [PATCH] powerpc/t4240: enable NAND boot support
shh.xie at gmail.com
- [U-Boot] [PATCH 0/2] usb: gadget: fotg210: workaround & new hardware support
Kuo-Jung Su
- [U-Boot] [PATCH 1/2] usb: gadget: fotg210: add w1c interrupt status support
Kuo-Jung Su
- [U-Boot] [PATCH 2/2] usb: gadget: fotg210: EP0 fifo empty indication is non-reliable
Kuo-Jung Su
- [U-Boot] Pull request: u-boot-sh/rmobile into u-boot-arm/master
Nobuhiro Iwamatsu
- [U-Boot] [PATCH 1/3 v2] sh: add support for sh7753evb board
Nobuhiro Iwamatsu
- [U-Boot] [PATCH 2/3 v2] net: sh-eth: add support for SH7753
Nobuhiro Iwamatsu
- [U-Boot] [PATCH 3/3 v2] serial_sh: add support for SH7753
Nobuhiro Iwamatsu
- [U-Boot] Pull request: u-boot-sh/master
Nobuhiro Iwamatsu
- [U-Boot] [PATCH] Makefile: fix broken pipe error for lcd4_lwmon5 board
Masahiro Yamada
- [U-Boot] [PATCH] Makefile: fix broken pipe error for lcd4_lwmon5 board
Stefan Roese
- [U-Boot] [PATCH v2] Makefile: fix broken pipe error for lcd4_lwmon5 board
Masahiro Yamada
- [U-Boot] [PATCH] Makefile: fix broken pipe error for lcd4_lwmon5 board
Masahiro Yamada
- [U-Boot] [PATCH v3 0/8] SATA support for omap5_uevm and dra7_evm
Enric Balletbo Serra
- [U-Boot] [PATCH v7] spi: Add support SH Quad SPI driver
Jagan Teki
- [U-Boot] [PATCH v3 0/8] SATA support for omap5_uevm and dra7_evm
Tom Rini
- [U-Boot] "arm: keep all sections in ELF file" breaks Arndale
Andre Przywara
- [U-Boot] [PATCH] board:trats1:trats2: fix adapter number
Piotr Wilczek
- [U-Boot] [PATCH 1/2] usb: gadget: fotg210: add w1c interrupt status support
Marek Vasut
- [U-Boot] [PATCH 2/2] usb: gadget: fotg210: EP0 fifo empty indication is non-reliable
Marek Vasut
- [U-Boot] Pull request: u-boot-sh/master
Tom Rini
- [U-Boot] [PATCH v2 2/5] arm: pxa: fix LP-8x4x USB support
Marek Vasut
- [U-Boot] [PATCH v2 0/5] fix and update LP-8x4x to boot DT kernel
Marek Vasut
- [U-Boot] [PATCH] mmc/dwmmc: Using calloc instead malloc
Chin Liang See
- [U-Boot] [PATCH] mmc/dwmmc: Using calloc instead malloc
Alexey Brodkin
- [U-Boot] [PATCH v2 00/35] zynq: More boards support
Jagannadha Sutradharudu Teki
- [U-Boot] [PATCH v2 01/35] zynq: Enable CONFIG_FIT_VERBOSE
Jagannadha Sutradharudu Teki
- [U-Boot] [PATCH v2 02/35] zynq: Enable Boot FreeBSD/vxWorks
Jagannadha Sutradharudu Teki
- [U-Boot] [PATCH v2 03/35] zynq: Cleanup on miscellaneous configs
Jagannadha Sutradharudu Teki
- [U-Boot] [PATCH v2 04/35] zynq: Cleanup on memory configs
Jagannadha Sutradharudu Teki
- [U-Boot] [PATCH v2 05/35] zynq: Minor config cleanup
Jagannadha Sutradharudu Teki
- [U-Boot] [PATCH v2 06/35] zynq: Enable cache options
Jagannadha Sutradharudu Teki
- [U-Boot] [PATCH v2 07/35] zynq: Add UART0, UART1 configs support
Jagannadha Sutradharudu Teki
- [U-Boot] [PATCH v2 08/35] zynq: Add GEM0, GEM1 configs support
Jagannadha Sutradharudu Teki
- [U-Boot] [PATCH v2 09/35] zynq-common: Rename zynq with zynq-common
Jagannadha Sutradharudu Teki
- [U-Boot] [PATCH v2 10/35] zynq: Add support to find bootmode
Jagannadha Sutradharudu Teki
- [U-Boot] [PATCH v2 11/35] spi: Add zynq qspi controller driver
Jagannadha Sutradharudu Teki
- [U-Boot] [PATCH v2 12/35] zynq-common: Enable CONFIG_ZYNQ_QSPI
Jagannadha Sutradharudu Teki
- [U-Boot] [PATCH v2 13/35] zynq: Add zynq zc70x board support
Jagannadha Sutradharudu Teki
- [U-Boot] [PATCH v2 14/35] zynq: Add zynq zed board support
Jagannadha Sutradharudu Teki
- [U-Boot] [PATCH v2 15/35] zynq-common: Define CONFIG_SPI_FLASH_BAR
Jagannadha Sutradharudu Teki
- [U-Boot] [PATCH v2 16/35] zynq: Move CONFIG_SYS_SDRAM_SIZE to pre-board configs
Jagannadha Sutradharudu Teki
- [U-Boot] [PATCH v2 17/35] zynq-common: Define exact TEXT_BASE
Jagannadha Sutradharudu Teki
- [U-Boot] [PATCH v2 18/35] zynq: zc70x: Add Catalyst 24WC08 EEPROM config support
Jagannadha Sutradharudu Teki
- [U-Boot] [PATCH v2 19/35] zynq: Add zynq microzed board support
Jagannadha Sutradharudu Teki
- [U-Boot] [PATCH v2 20/35] zynq: Add zynq_zc770 xm010 board support
Jagannadha Sutradharudu Teki
- [U-Boot] [PATCH v2 21/35] zynq: Add zynq_zc770 xm013 board support
Jagannadha Sutradharudu Teki
- [U-Boot] [PATCH v2 22/35] zynq: Add zynq_zc770 xm012 board support
Jagannadha Sutradharudu Teki
- [U-Boot] [PATCH v2 23/35] nand: Add zynq nand controller driver support
Jagannadha Sutradharudu Teki
- [U-Boot] [PATCH v2 24/35] zynq-common: Define CONFIG_NAND_ZYNQ
Jagannadha Sutradharudu Teki
- [U-Boot] [PATCH v2 25/35] zynq: Add zynq_zc770 xm011 board support
Jagannadha Sutradharudu Teki
- [U-Boot] [PATCH v2 26/35] zynq: Add support to find bootmode
Jagannadha Sutradharudu Teki
- [U-Boot] [PATCH v2 27/35] zynq-common: Define default environment
Jagannadha Sutradharudu Teki
- [U-Boot] [PATCH v2 28/35] zynq-common: Change Env. Sector size to 128Kb
Jagannadha Sutradharudu Teki
- [U-Boot] [PATCH v2 29/35] zynq-common: Define flash env. partition
Jagannadha Sutradharudu Teki
- [U-Boot] [PATCH v2 30/35] zynq-common: Define CONFIG_ENV_OVERWRITE
Jagannadha Sutradharudu Teki
- [U-Boot] [PATCH v2 31/35] dts: zynq: Add basic fdt support
Jagannadha Sutradharudu Teki
- [U-Boot] [PATCH v2 32/35] gpio: zynq: Add dummy gpio routines
Jagannadha Sutradharudu Teki
- [U-Boot] [PATCH v2 33/35] zynq-common: Enable verified boot(RSA)
Jagannadha Sutradharudu Teki
- [U-Boot] [PATCH v2 34/35] dts: zynq: Add more zynq dts files
Jagannadha Sutradharudu Teki
- [U-Boot] [PATCH v2 35/35] doc: Update the zynq u-boot status
Jagannadha Sutradharudu Teki
- [U-Boot] [PATCH v2 23/35] nand: Add zynq nand controller driver support
Marek Vasut
- [U-Boot] [PATCH] socfpga/dwmmc: Adding DesignWare MMC driver support for SOCFPGA
Chin Liang See
- [U-Boot] [PATCH v2] Makefile: fix broken pipe error for lcd4_lwmon5 board
Simon Glass
- [U-Boot] [PATCH v3] arm: pxa: fix LP-8x4x USB support
Sergei Ianovich
- [U-Boot] [PATCH 0/34] Switch over to real Kbuild
Simon Glass
- [U-Boot] [PATCH v2 0/5] fix and update LP-8x4x to boot DT kernel
Sergei Ianovich
- [U-Boot] [PULL] u-boot-atmel/master -> u-boot-arm/master
Albert ARIBAUD
- [U-Boot] [PATCH v3] arm: pxa: fix LP-8x4x USB support
Marek Vasut
- [U-Boot] [PATCH v2] mmc/dwmmc: Using calloc instead malloc
Chin Liang See
- [U-Boot] [PATCH v2] socfpga/dwmmc: Adding DesignWare MMC driver support for SOCFPGA
Chin Liang See
- [U-Boot] [PULL] u-boot-pxa/master
Marek Vasut
- [U-Boot] [PATCH REPOST2] spi: tegra: clear RDY bit prior to every transfer
Jagan Teki
- [U-Boot] [PATCH] arm: omap3: Fix beagleboard SPL boot hangup (GPIO clocks not enabled)
Michael Trimarchi
- [U-Boot] [PATCH V2] spi: tegra: clear RDY bit prior to every transfer
Stephen Warren
- [U-Boot] Pull request: u-boot-sh/rmobile into u-boot-arm/master
Albert ARIBAUD
- [U-Boot] [PATCH v2 00/13] Introduce Samsung misc file and LCD menu.
Przemyslaw Marczak
- [U-Boot] [PATCH v2 01/13] s5p: gpio: change gpio coding method for s5p gpio.
Przemyslaw Marczak
- [U-Boot] [PATCH v2 02/13] trats: add optional cflags to board object file.
Przemyslaw Marczak
- [U-Boot] [PATCH v2 03/13] trats2: Code cleanup.
Przemyslaw Marczak
- [U-Boot] [PATCH v2 04/13] samsung: common: Add misc file and common function misc_init_r().
Przemyslaw Marczak
- [U-Boot] [PATCH v2 05/13] samsung: misc: move display logo function to misc.c file.
Przemyslaw Marczak
- [U-Boot] [PATCH v2 06/13] common: makefile: Add optional cflags to object: common/lcd.o
Przemyslaw Marczak
- [U-Boot] [PATCH v2 07/13] lib: tizen: change Tizen logo with the new one.
Przemyslaw Marczak
- [U-Boot] [PATCH v2 08/13] video: exynos: fimd: add support for various display color modes
Przemyslaw Marczak
- [U-Boot] [PATCH v2 09/13] samsung: boards: update display configs with 16bpp mode.
Przemyslaw Marczak
- [U-Boot] [PATCH v2 10/13] samsung: misc: Add LCD download menu.
Przemyslaw Marczak
- [U-Boot] [PATCH v2 11/13] Trats: add LCD download menu support
Przemyslaw Marczak
- [U-Boot] [PATCH v2 12/13] trats2: add LCD download menu support
Przemyslaw Marczak
- [U-Boot] [PATCH v2 13/13] universal: add LCD download menu support
Przemyslaw Marczak
- [U-Boot] [PATCH V2] spi: tegra: clear RDY bit prior to every transfer
Jagan Teki
- [U-Boot] [UBOOT][PATCH 5/5] am43xx: add delay before xfer
Jagan Teki
- [U-Boot] [PULL] u-boot-pxa/master
Albert ARIBAUD
- [U-Boot] [UBOOT][PATCH 3/5] sf: macronix: Add support for MX66L51235F
Jagan Teki
- [U-Boot] [PULL] u-boot-usb/master
Marek Vasut
- [U-Boot] [PULL] u-boot-pxa/master
Marek Vasut
- [U-Boot] [PATCH v2 23/35] nand: Add zynq nand controller driver support
Jagan Teki
- [U-Boot] [PULL] u-boot-pxa/master
Tom Rini
- [U-Boot] [PULL] u-boot-pxa/master
Marek Vasut
- [U-Boot] [PATCH] cam_enc_4xx: Set CONFIG_SYS_NAND_MAX_OOBFREE / CONFIG_SYS_NAND_MAX_ECCPOS
Tom Rini
- [U-Boot] [PATCH] spi/cadence: Adding Cadence SPI driver support for SOCFPGA
Chin Liang See
- [U-Boot] pull request for u-boot-tegra/master into ARM/master
Tom Warren
- [U-Boot] Please pull u-boot-ti/master
Tom Rini
- [U-Boot] [PATCH V3 00/14] ARM: AM43xx: Update support for AM4372 SoC
Tom Rini
- [U-Boot] ARM: am437x: Adapt to common CONFIG_BOOTCMD
Tom Rini
- [U-Boot] arm: omap3: Fix beagleboard SPL boot hangup (GPIO clocks not enabled)
Tom Rini
- [U-Boot] [PULL] u-boot-pxa/master
Marek Vasut
- [U-Boot] pull request for u-boot-tegra/master into ARM/master
Albert ARIBAUD
- [U-Boot] [PATCH] nand/denali: Adding Denali NAND driver support
Chin Liang See
- [U-Boot] linkstation_HGLAN and MPC824x support
York Sun
- [U-Boot] linkstation_HGLAN and MPC824x support
Tom Rini
- [U-Boot] [PULL] u-boot-pxa/master
Albert ARIBAUD
- [U-Boot] [PATCH] watchdog/denali: Adding DesignWare watchdog driver support
Chin Liang See
- [U-Boot] pull request for u-boot-tegra/master into ARM/master
Tom Warren
- [U-Boot] Pull request: nand flash
Scott Wood
- [U-Boot] [PATCH 0/2] socfpga: Adding Clock Manager
Chin Liang See
- [U-Boot] [PATCH 1/2] socfpga: Adding Clock Manager driver
Chin Liang See
- [U-Boot] [PATCH 2/2] socfpga: Adding Clock Manager handoff file
Chin Liang See
- [U-Boot] [PATCH 2/2] usb: gadget: fotg210: EP0 fifo empty indication is non-reliable
Kuo-Jung Su
- [U-Boot] [PATCH 1/2] usb: gadget: fotg210: add w1c interrupt status support
Kuo-Jung Su
- [U-Boot] [PATCH 1/2] usb: gadget: fotg210: add w1c interrupt status support
Marek Vasut
- [U-Boot] [PATCH 2/2] usb: gadget: fotg210: EP0 fifo empty indication is non-reliable
Marek Vasut
- [U-Boot] [PATCH 1/6] mx6: soc: Staticize set_vddsoc()
Fabio Estevam
- [U-Boot] [PATCH 2/6] mx6: soc: Clear the LDO ramp values up prior to setting the LDO voltages
Fabio Estevam
- [U-Boot] [PATCH 3/6] mx6: soc: Set the VDDSOC at 1.175 V
Fabio Estevam
- [U-Boot] [PATCH 4/6] mx6: soc: Introduce set_ldo_voltage()
Fabio Estevam
- [U-Boot] [PATCH 5/6] mx6: soc: Add the required LDO ramp up delay
Fabio Estevam
- [U-Boot] [PATCH 6/6] mx6: soc: Disable VDDPU regulator
Fabio Estevam
- [U-Boot] [PATCH 0/2] ARM: AMx3xx: Enable DDR IO dynamic power down
Lokesh Vutla
- [U-Boot] [PATCH 1/2] ARM: AM43xx: Enable DDR dynamic IO power down for DDR3
Lokesh Vutla
- [U-Boot] [PATCH 2/2] ARM: AM335x: Enable DDR dynamic IO power down
Lokesh Vutla
- [U-Boot] [UBOOT][PATCH 3/5] sf: macronix: Add support for MX66L51235F
Sourav Poddar
- [U-Boot] [UBOOT][PATCH 5/5] am43xx: add delay before xfer
Sourav Poddar
- [U-Boot] [UBOOT][PATCH 0/2] misc fix for memory mapped support, dra config
Sourav Poddar
- [U-Boot] [PATCH v2 08/13] video: exynos: fimd: add support for various display color modes
Donghwa Lee
- [U-Boot] [PATCH] powerpc/b4860/pbl: fix rcw cfg
shh.xie at gmail.com
- [U-Boot] [PATCH] fsl/usb: Fix phy type for Second USB controller
Nikhil Badola
- [U-Boot] [PATCH v2 07/13] lib: tizen: change Tizen logo with the new one.
황형원
- [U-Boot] [PATCH v2 06/13] common: makefile: Add optional cflags to object: common/lcd.o
Inha Song
- [U-Boot] [UBOOT][PATCH 3/5] sf: macronix: Add support for MX66L51235F
Jagan Teki
- [U-Boot] [UBOOT][PATCH 3/5] sf: macronix: Add support for MX66L51235F
Sourav Poddar
- [U-Boot] [UBOOT][PATCH 5/5] am43xx: add delay before xfer
Jagan Teki
- [U-Boot] [UBOOT][PATCH 5/5] am43xx: add delay before xfer
Sourav Poddar
- [U-Boot] [UBOOT][PATCH 3/5] sf: macronix: Add support for MX66L51235F
Jagan Teki
- [U-Boot] [UBOOT][PATCH 5/5] am43xx: add delay before xfer
Jagan Teki
- [U-Boot] [UBOOT][PATCH 0/2] misc fix for memory mapped support, dra config
Jagan Teki
- [U-Boot] [UBOOT][PATCH 0/2] misc fix for memory mapped support, dra config
Sourav Poddar
- [U-Boot] [UBOOT][PATCH 0/5] qspi: Add AM437x support
Jagan Teki
- [U-Boot] [UBOOT][PATCH 0/2] misc fix for memory mapped support, dra config
Jagan Teki
- [U-Boot] [UBOOT][PATCH 0/2] misc fix for memory mapped support, dra config
Sourav Poddar
- [U-Boot] [PATCH 2/2] usb: gadget: fotg210: EP0 fifo empty indication is non-reliable
Kuo-Jung Su
- [U-Boot] [UBOOT][PATCH 0/5] qspi: Add AM437x support
Sourav Poddar
- [U-Boot] [PATCH 1/2] usb: gadget: fotg210: add w1c interrupt status support
Kuo-Jung Su
- [U-Boot] [PATCH 1/2] usb: gadget: fotg210: add w1c interrupt status support
Marek Vasut
- [U-Boot] [PATCH 2/2] usb: gadget: fotg210: EP0 fifo empty indication is non-reliable
Marek Vasut
- [U-Boot] [UBOOT][PATCH 0/5] qspi: Add AM437x support
Jagan Teki
- [U-Boot] [PATCH v2] Makefile: fix broken pipe error for lcd4_lwmon5 board
Masahiro Yamada
- [U-Boot] [UBOOT][PATCH 0/5] qspi: Add AM437x support
Sourav Poddar
- [U-Boot] [UBOOT][PATCH 0/5] qspi: Add AM437x support
Sourav Poddar
- [U-Boot] [UBOOT][PATCH 0/5] qspi: Add AM437x support
Jagan Teki
- [U-Boot] [UBOOT][PATCH 0/5] qspi: Add AM437x support
Sourav Poddar
- [U-Boot] [UBOOT][PATCH 0/5] qspi: Add AM437x support
Jagan Teki
- [U-Boot] [UBOOT][PATCH 0/5] qspi: Add AM437x support
Jagan Teki
- [U-Boot] [UBOOT][PATCH 0/5] qspi: Add AM437x support
Sourav Poddar
- [U-Boot] [PATCH 1/2] doc: README.fuse: Add an example on how to use the fuse API on mx6q
Stefano Babic
- [U-Boot] [PATCH] Add lzmadec command
Patrice B
- [U-Boot] [PATCH] MX6: fix sata compilation for i.MX6
Stefano Babic
- [U-Boot] [PATCH v2 11/35] spi: Add zynq qspi controller driver
Michal Simek
- [U-Boot] [PATCH v2 23/35] nand: Add zynq nand controller driver support
Michal Simek
- [U-Boot] [PATCH v3 1/8] wandboard: add Future Eletronics 7" WVGA LCD extension board
Stefano Babic
- [U-Boot] [PATCH v2 07/13] lib: tizen: change Tizen logo with the new one.
Przemyslaw Marczak
- [U-Boot] [PATCH v3 3/8] imx: Easy enabling of SION per-pin using MUX_MODE_SION helper macro
Stefano Babic
- [U-Boot] [PATCH v3 4/8] mx28evk: Use 512k for fdt partition to align it
Stefano Babic
- [U-Boot] [PATCH v3 5/8] mx28evk: Add 'nandboot' environment command
Stefano Babic
- [U-Boot] [PATCH v3 7/8] ARM: mx6: Change the FDT loading address to avoid overlaping
Stefano Babic
- [U-Boot] [PATCH v3 8/8] ARM: mx6: Allow enablement of FEC Anatop based clock for all MX6
Stefano Babic
- [U-Boot] [PATCH v3 5/8] mx28evk: Add 'nandboot' environment command
Fabio Estevam
- [U-Boot] [UBOOT][PATCH 0/5] qspi: Add AM437x support
Sourav Poddar
- [U-Boot] [PATCH] common, env: optimize boottime
Heiko Schocher
- [U-Boot] Please pull u-boot-ti/master
Dan Murphy
- [U-Boot] [PATCH] spi/cadence: Adding Cadence SPI driver support for SOCFPGA
Gerhard Sittig
- [U-Boot] [PATCH] board:trats2: fix default partitions and mmc env
Piotr Wilczek
- [U-Boot] Please pull u-boot-ti/master
Tom Rini
- [U-Boot] [PATCH v16 02/10] cmd_pxe: remove compiling warnings
FengHua
- [U-Boot] [PATCH] spi/cadence: Adding Cadence SPI driver support for SOCFPGA
Chin Liang See
- [U-Boot] [RFC PATCH 0/2] OMAP4/5: Add alternative method for HSIC USB devices reset
Lubomir Popov
- [U-Boot] [RFC PATCH 1/2] ARM: OMAP4/5: Add alternative method for HSIC USB devices reset
Lubomir Popov
- [U-Boot] [RFC PATCH 2/2] ARM: omap5_uevm: Example usage of alternative HSIC USB device reset
Lubomir Popov
- [U-Boot] [PATCH] ARM: omap5_uevm: Enable 8-bit eMMC access
Lubomir Popov
- [U-Boot] [PATCH] board:trats1:trats2: fix adapter number
Piotr Wilczek
- [U-Boot] [RFC] Tigon III (bcm57xx) Driver on fsl platforms
Ben Collins
- [U-Boot] [RFC PATCH V2 1/2] ARM: OMAP4/5: Add alternative method for HSIC USB devices reset
Lubomir Popov
- [U-Boot] [PATCH] sf: Updated Makefile to group generic files
Jagannadha Sutradharudu Teki
- [U-Boot] [PATCH] spi/cadence: Adding Cadence SPI driver support for SOCFPGA
Jagan Teki
- [U-Boot] [RFC PATCH V3 1/2] ARM: OMAP4/5: Add alternative method for HSIC USB devices reset
Lubomir Popov
- [U-Boot] [PATCH] sf: Updated Makefile to group generic files
Tom Rini
- [U-Boot] [PATCH] spi/cadence: Adding Cadence SPI driver support for SOCFPGA
Chin Liang See
- [U-Boot] [PATCH v2] Makefile: fix broken pipe error for lcd4_lwmon5 board
Simon Glass
- [U-Boot] [PATCH V3 00/14] ARM: AM43xx: Update support for AM4372 SoC
Tom Rini
- [U-Boot] Please pull u-boot-ti/master, v2
Tom Rini
- [U-Boot] [PATCH] sf: Updated Makefile to group generic files
Jagan Teki
- [U-Boot] [PATCH 32/32] sandbox: Add LCD driver
Simon Glass
- [U-Boot] [PATCH] sf: Updated Makefile to group generic files
Tom Rini
- [U-Boot] Makefile: fix the typo error for mrproper
Tom Rini
- [U-Boot] [PULL] u-boot-usb/master
Tom Rini
- [U-Boot] [U-Boot, v2] Makefile: fix broken pipe error for lcd4_lwmon5 board
Tom Rini
- [U-Boot] Pull request: nand flash
Tom Rini
- [U-Boot] [PATCH] sf: Updated Makefile to group generic files
Jagan Teki
- [U-Boot] [PATCH V3 00/14] ARM: AM43xx: Update support for AM4372 SoC
Lokesh Vutla
- [U-Boot] [PATCH v3 00/29] zynq: More boards support
Jagannadha Sutradharudu Teki
- [U-Boot] [PATCH v3 01/29] zynq: Enable CONFIG_FIT_VERBOSE
Jagannadha Sutradharudu Teki
- [U-Boot] [PATCH v3 02/29] zynq: Enable Boot FreeBSD/vxWorks
Jagannadha Sutradharudu Teki
- [U-Boot] [PATCH v3 03/29] zynq: Cleanup on miscellaneous configs
Jagannadha Sutradharudu Teki
- [U-Boot] [PATCH v3 04/29] zynq: Cleanup on memory configs
Jagannadha Sutradharudu Teki
- [U-Boot] [PATCH v3 05/29] zynq: Minor config cleanup
Jagannadha Sutradharudu Teki
- [U-Boot] [PATCH v3 06/29] zynq: Enable cache options
Jagannadha Sutradharudu Teki
- [U-Boot] [PATCH v3 07/29] zynq: Add UART0, UART1 configs support
Jagannadha Sutradharudu Teki
- [U-Boot] [PATCH v3 08/29] zynq: Add GEM0, GEM1 configs support
Jagannadha Sutradharudu Teki
- [U-Boot] [PATCH v3 09/29] zynq-common: Rename zynq with zynq-common
Jagannadha Sutradharudu Teki
- [U-Boot] [PATCH v3 10/29] doc: zynq: Add information on zynq u-boot
Jagannadha Sutradharudu Teki
- [U-Boot] [PATCH v3 11/29] zynq: Add zynq zc70x board support
Jagannadha Sutradharudu Teki
- [U-Boot] [PATCH v3 12/29] zynq: Add zynq zed board support
Jagannadha Sutradharudu Teki
- [U-Boot] [PATCH v3 13/29] zynq: Move CONFIG_SYS_SDRAM_SIZE to pre-board configs
Jagannadha Sutradharudu Teki
- [U-Boot] [PATCH v3 14/29] zynq-common: Define exact TEXT_BASE
Jagannadha Sutradharudu Teki
- [U-Boot] [PATCH v3 15/29] zynq: zc70x: Add Catalyst 24WC08 EEPROM config support
Jagannadha Sutradharudu Teki
- [U-Boot] [PATCH v3 16/29] zynq: Add zynq microzed board support
Jagannadha Sutradharudu Teki
- [U-Boot] [PATCH v3 17/29] zynq: Add zynq_zc770 xm010 board support
Jagannadha Sutradharudu Teki
- [U-Boot] [PATCH v3 18/29] zynq: Add zynq_zc770 xm013 board support
Jagannadha Sutradharudu Teki
- [U-Boot] [PATCH v3 19/29] zynq: Add zynq_zc770 xm012 board support
Jagannadha Sutradharudu Teki
- [U-Boot] [PATCH v3 20/29] zynq: Add support to find bootmode
Jagannadha Sutradharudu Teki
- [U-Boot] [PATCH v3 21/29] zynq-common: Define default environment
Jagannadha Sutradharudu Teki
- [U-Boot] [PATCH v3 22/29] zynq-common: Change Env. Sector size to 128Kb
Jagannadha Sutradharudu Teki
- [U-Boot] [PATCH v3 23/29] zynq-common: Define flash env. partition
Jagannadha Sutradharudu Teki
- [U-Boot] [PATCH v3 24/29] zynq-common: Define CONFIG_ENV_OVERWRITE
Jagannadha Sutradharudu Teki
- [U-Boot] [PATCH v3 25/29] dts: zynq: Add basic fdt support
Jagannadha Sutradharudu Teki
- [U-Boot] [PATCH v3 26/29] gpio: zynq: Add dummy gpio routines
Jagannadha Sutradharudu Teki
- [U-Boot] [PATCH v3 27/29] zynq-common: Enable verified boot(RSA)
Jagannadha Sutradharudu Teki
- [U-Boot] [PATCH v3 28/29] dts: zynq: Add more zynq dts files
Jagannadha Sutradharudu Teki
- [U-Boot] [PATCH v3 29/29] doc: Update the zynq u-boot status
Jagannadha Sutradharudu Teki
- [U-Boot] Pull request: u-boot-spi/master
Jagannadha Sutradharudu Teki
- [U-Boot] [PATCH v3 00/29] zynq: More boards support
Jagan Teki
- [U-Boot] [PATCH v7] spi: Add Faraday SPI controller support
Jagannadha Sutradharudu Teki
- [U-Boot] [PATCH v7] spi: Add Faraday SPI controller support
Jagan Teki
- [U-Boot] [RFC] Tigon III (bcm57xx) Driver on fsl platforms
Wolfgang Denk
- [U-Boot] [PATCH] spi/cadence: Adding Cadence SPI driver support for SOCFPGA
Gerhard Sittig
- [U-Boot] [RFC PATCH V3 1/2] ARM: OMAP4/5: Add alternative method for HSIC USB devices reset
Gerhard Sittig
- [U-Boot] [PATCH V2 1/7] exynos_fb: Remove usage of static defines
Simon Glass
- [U-Boot] [PATCH V2 2/7] arm: exynos: Add RPLL for Exynos5420
Simon Glass
- [U-Boot] [PATCH V3 3/7] arm: exynos: Add get_lcd_clk and set_lcd_clk callbacks for Exynos5420
Simon Glass
- [U-Boot] [PATCH V2 4/7] video: exynos_fimd: Add framework to disable FIMD sysmmu
Simon Glass
- [U-Boot] [PATCH V2 5/7] smdk5420: Implement callbacks needed by exynos_fb driver
Simon Glass
- [U-Boot] [PATCH V2 6/7] exynos: s2mps11_pmic: Enable LDO38 for SMDK5420
Simon Glass
- [U-Boot] [PATCH V2 7/7] CONFIG: SMDK5420: Enable FIMD and DP
Simon Glass
- [U-Boot] [PATCH] spi/cadence: Adding Cadence SPI driver support for SOCFPGA
Chin Liang See
- [U-Boot] [PATCH 01/11 V11] EXYNOS5: Create a common board file
Simon Glass
- [U-Boot] [PATCH 03/11 V11] EXYNOS5420: Add power register structure.
Simon Glass
- [U-Boot] [PATCH 04/11 V11] EXYNOS5420: Add dmc and phy_control register structure
Simon Glass
- [U-Boot] [PATCH 05/11 V11] Exynos5420: Add clock initialization for 5420
Simon Glass
- [U-Boot] [PATCH 06/11 V11] Exynos5420: Add DDR3 initialization for 5420
Simon Glass
- [U-Boot] [PATCH 08/11 V11] Exynos5420: Add base patch for SMDK5420
Simon Glass
- [U-Boot] [PATCH 00/11 V11] EXYNOS5420: Add SMDK5420 board support
Simon Glass
- [U-Boot] [PATCH] Exynos5: Clock: Generic api to set and get clock rate and source
Simon Glass
- [U-Boot] [RFC] Tigon III (bcm57xx) Driver on fsl platforms
Ben Collins
- [U-Boot] [RFC PATCH V4 1/2] ARM: OMAP4/5: Add alternative method for HSIC USB devices reset
Lubomir Popov
- [U-Boot] Unable to boot the system
Tingyu He
- [U-Boot] Pull request: u-boot-spi/master
Tom Rini
- [U-Boot] [PATCH] lib: time: add weak timer_init() function
Darwin Rambo
- [U-Boot] Please pull u-boot-ti/master, v2
Albert ARIBAUD
- [U-Boot] [PATCH] mmc: Minor cleanup of sdhci.c
Darwin Rambo
- [U-Boot] [PATCH] lib: fix return codes when CONFIG_SYS_VSNPRINTF is enabled
Darwin Rambo
- [U-Boot] [PATCH v2 0/35] Switch over to real Kbuild
Simon Glass
- [U-Boot] [PATCH] powerpc/t2080qds: some update for t2080qds
Shengzhou Liu
- [U-Boot] [PATCH v7] spi: Add Faraday SPI controller support
Kuo-Jung Su
- [U-Boot] [PATCH 2/2] usb: gadget: fotg210: EP0 fifo empty indication is non-reliable
Kuo-Jung Su
- [U-Boot] [PATCH] powerpc/83xx: fix compilation error for MPC8315ERDB
Nikhil Badola
- [U-Boot] [PATCH v2 0/2] usb: gadget: fotg210: workaround & new hardware support
Kuo-Jung Su
- [U-Boot] [PATCH v2 1/2] usb: gadget: fotg210: add w1c interrupt status support
Kuo-Jung Su
- [U-Boot] [PATCH v2 2/2] usb: gadget: fotg210: EP0 fifo empty indication is non-reliable
Kuo-Jung Su
- [U-Boot] [PATCH v2 07/13] lib: tizen: change Tizen logo with the new one.
Hyungwon Hwang
- [U-Boot] [PATCH v3 1/4] spi:rewrite the Freescale DSPI driver.
Chao Fu
- [U-Boot] [PATCH v3 2/4] arm:vf610:Enable the DSPI for Freescale vf610 platform
Chao Fu
- [U-Boot] [PATCH v3 3/4] arm:vf610:vf610-twr:Enable the DSPI for Freesacale vf610-twr board
Chao Fu
- [U-Boot] [PATCH v3 4/4] mtd:vf610twr:add flash at26df081a for vf610twr platform
Chao Fu
- [U-Boot] [UBOOT][PATCHv2 0/5] qspi: Add AM437x support
Sourav Poddar
- [U-Boot] [UBOOT][PATCHv2 1/5] am43xx: add qspi support
Sourav Poddar
- [U-Boot] [UBOOT][PATCHv2 2/5] am437x_epos_evm: add SPL API, QSPI, and serial flash support
Sourav Poddar
- [U-Boot] [UBOOT][PATCHv2 3/5] qspi/spi: Add AM43xx specifics changes
Sourav Poddar
- [U-Boot] [UBOOT][PATCHv2 4/5] am43xx: add delay before xfer
Sourav Poddar
- [U-Boot] [UBOOT][PATCHv2 5/5] doc: SPI: Add qspi test details on AM43xx
Sourav Poddar
- [U-Boot] [RFC] Tigon III (bcm57xx) Driver on fsl platforms
Wolfgang Denk
- [U-Boot] [PATCH 2/2] usb: gadget: fotg210: EP0 fifo empty indication is non-reliable
Marek Vasut
- [U-Boot] [PATCH V2 4/7] video: exynos_fimd: Add framework to disable FIMD sysmmu
Ajay kumar
- [U-Boot] [PATCH 0/2] video: ipu reg: Correct some reserved array sizes
Liu Ying
- [U-Boot] [PATCH 1/2] video: ipu reg: Correct reserved1 array size in struct ipu_cm
Liu Ying
- [U-Boot] [PATCH 2/2] video: ipu reg: Correct reserved array size in struct ipu_idmac
Liu Ying
- [U-Boot] [PATCH 1/2] video: ipu reg: Correct reserved1 array size in struct ipu_cm
Yibin Gong
- [U-Boot] [PATCH 2/2] video: ipu reg: Correct reserved array size in struct ipu_idmac
Yibin Gong
- [U-Boot] [PATCH 00/11 V12] EXYNOS5420: Add SMDK5420 board support
Rajeshwari S Shinde
- [U-Boot] [PATCH 01/11 V12] EXYNOS5: Create a common board file
Rajeshwari S Shinde
- [U-Boot] [PATCH 02/11 V12] Exynos5420: Add base addresses for 5420
Rajeshwari S Shinde
- [U-Boot] [PATCH 03/11 V12] EXYNOS5420: Add power register structure.
Rajeshwari S Shinde
- [U-Boot] [PATCH 04/11 V12] EXYNOS5420: Add dmc and phy_control register structure
Rajeshwari S Shinde
- [U-Boot] [PATCH 05/11 V12] Exynos5420: Add clock initialization for 5420
Rajeshwari S Shinde
- [U-Boot] [PATCH 06/11 V12] Exynos5420: Add DDR3 initialization for 5420
Rajeshwari S Shinde
- [U-Boot] [PATCH 07/11 V12] Exynos5420: Add support for 5420 in pinmux and gpio
Rajeshwari S Shinde
- [U-Boot] [PATCH 08/11 V12] Exynos5420: Add base patch for SMDK5420
Rajeshwari S Shinde
- [U-Boot] [PATCH 09/11 V12] DTS: Add dts support for SMDK5420
Rajeshwari S Shinde
- [U-Boot] [PATCH 10/11 V12] Config: Add initial config for SMDK5420
Rajeshwari S Shinde
- [U-Boot] [PATCH 11/11 V12] SPL: EXYNOS: Prepare for variable size SPL support
Rajeshwari S Shinde
- [U-Boot] [PATCH V2 5/7] smdk5420: Implement callbacks needed by exynos_fb driver
Ajay kumar
- [U-Boot] [PATCH V2 6/7] exynos: s2mps11_pmic: Enable LDO38 for SMDK5420
Ajay kumar
- [U-Boot] Unable to boot the system
Michal Simek
- [U-Boot] [PATCH v2 0/2] usb: gadget: fotg210: workaround & new hardware support
Marek Vasut
- [U-Boot] [PATCH v2 07/13] lib: tizen: change Tizen logo with the new one.
Przemyslaw Marczak
- [U-Boot] Improve upstream support for Snowball board (v2)
Roy Spliet
- [U-Boot] [PATCH 1/3] drivers/smc911x: Add support for shifted register read/write
Roy Spliet
- [U-Boot] [PATCH 2/3] board/snowball: Add support for network boot
Roy Spliet
- [U-Boot] [PATCH 3/3] board/snowball: Enable FDT
Roy Spliet
- [U-Boot] [UBOOT][PATCHv2 5/5] doc: SPI: Add qspi test details on AM43xx
Tom Rini
- [U-Boot] ARM: Samsung: Change GONI and Universal_C210 maintainers.
Tom Rini
- [U-Boot] [RFC] Tigon III (bcm57xx) Driver on fsl platforms
Ben Collins
- [U-Boot] [PATCH] TI:omap3: Drop omap3_zoom2
Tom Rini
- [U-Boot] [PATCH V2 4/7] video: exynos_fimd: Add framework to disable FIMD sysmmu
Simon Glass
- [U-Boot] [PATCH] PowerPC: Drop linkstation_HGLAN support
Tom Rini
- [U-Boot] [PATCH V2 5/7] smdk5420: Implement callbacks needed by exynos_fb driver
Simon Glass
- [U-Boot] [PATCH 06/11 V12] Exynos5420: Add DDR3 initialization for 5420
Simon Glass
- [U-Boot] [UBOOT][PATCHv2 0/5] qspi: Add AM437x support
Jagan Teki
- [U-Boot] [PATCH v8] spi: Add Faraday SPI controller support
Jagannadha Sutradharudu Teki
- [U-Boot] [UBOOT][PATCHv2 0/5] qspi: Add AM437x support
Tom Rini
- [U-Boot] [UBOOT][PATCHv2 0/5] qspi: Add AM437x support
Sourav Poddar
- [U-Boot] [PATCH 05/32] sandbox: spi: Adjust 'sf test' to work on sandbox
Jagan Teki
- [U-Boot] [PATCH 0/8] Secure boot improvements and test on Beaglebone Black
Tom Rini
- [U-Boot] [PATCH v2] exynos5250: remove redundant SPI and PMIC related configs
Jagan Teki
- [U-Boot] [PATCH v6] spi: pl022_spi: Add support for ARM PL022 spi controller
Jagan Teki
- [U-Boot] [PATCH v5 5/8] SPI: add Dove support to Kirkwood SPI driver
Jagan Teki
- [U-Boot] [PATCH] Add code for spi half duplex operation for enc28j60
Jagan Teki
- [U-Boot] [PATCH] Fix problems in chip select selection in imx23, 28 spi code
Jagan Teki
- [U-Boot] [PATCH v2 1/2] doc: README.fuse: Add an example on how to use the fuse API on mx6q
Fabio Estevam
- [U-Boot] [PATCH v2 2/2] mx6sabre_common.h: Add CONFIG_CMD_FUSE support
Fabio Estevam
- [U-Boot] [PATCH 1/2] doc: README.fuse: Add an example on how to use the fuse API on mx6q
Fabio Estevam
- [U-Boot] [RFC] Tigon III (bcm57xx) Driver on fsl platforms
Tom Rini
- [U-Boot] [PATCH] board: nios2: Add CONFIG_CFI_FLASH_MTD guard to flash.h header include
Ezequiel Garcia
- [U-Boot] [RFC] Tigon III (bcm57xx) Driver on fsl platforms
Wolfgang Denk
- [U-Boot] [PATCH] PowerPC: Drop linkstation_HGLAN support
Wolfgang Denk
- [U-Boot] [PATCH] PowerPC: Drop linkstation_HGLAN support
Tom Rini
- [U-Boot] [PATCH v4 11/29] zynq: Add zynq zc70x board support
Jagannadha Sutradharudu Teki
- [U-Boot] [PATCH v4 19/29] zynq: Add zynq_zc770 xm012 board support
Jagannadha Sutradharudu Teki
- [U-Boot] [PATCH v8] spi: Add Faraday SPI controller support
Jagan Teki
- [U-Boot] [U-Boot,PATCHv3,1/5] am43xx: Add qspi support
Jagannadha Sutradharudu Teki
- [U-Boot] [U-Boot, PATCHv2, 2/5] am437x_epos_evm: add SPL API, QSPI, and serial flash support
Jagannadha Sutradharudu Teki
- [U-Boot] [U-Boot, PATCHv2, 3/5] spi: ti_qspi: Add AM43xx specifics changes
Jagannadha Sutradharudu Teki
- [U-Boot] [U-Boot, PATCHv2, 4/5] spi: ti_qspi: Add delay before xfer for am43xx
Jagannadha Sutradharudu Teki
- [U-Boot] [U-Boot, PATCHv2, 5/5] doc: SPI: Add qspi test details on AM43xx
Jagannadha Sutradharudu Teki
- [U-Boot] [U-Boot, PATCHv3, 2/5] am437x_epos_evm: add SPL API, QSPI, and serial flash support
Jagannadha Sutradharudu Teki
- [U-Boot] [U-Boot, PATCHv3, 3/5] spi: ti_qspi: Add AM43xx specifics changes
Jagannadha Sutradharudu Teki
- [U-Boot] [U-Boot, PATCHv3, 4/5] spi: ti_qspi: Add delay before xfer for am43xx
Jagannadha Sutradharudu Teki
- [U-Boot] [U-Boot, PATCHv3, 5/5] doc: SPI: Add qspi test details on AM43xx
Jagannadha Sutradharudu Teki
- [U-Boot] [U-Boot,PATCHv3,1/5] am43xx: Add qspi support
Jagannadha Sutradharudu Teki
- [U-Boot] [PATCH v3 1/4] mkexynosspl: fix uninitialized buffer
Albert ARIBAUD
- [U-Boot] "arm: keep all sections in ELF file" breaks Arndale
Albert ARIBAUD
- [U-Boot] [PATCH v2 1/2] doc: README.fuse: Add an example on how to use the fuse API on mx6q
Benoît Thébaudeau
- [U-Boot] [PATCH] ARM: tam3517-common: fix nand spl boot
Jeroen Hofstee
- [U-Boot] [PATCH] ARM: twister: add missing gpio clock init
Jeroen Hofstee
- [U-Boot] "arm: keep all sections in ELF file" breaks Arndale
Andre Przywara
- [U-Boot] "arm: keep all sections in ELF file" breaks Arndale
Andre Przywara
- [U-Boot] [PATCH v2 0/2] video: ipu reg: Correct some reserved array sizes
Liu Ying
- [U-Boot] [PATCH v2 1/2] video: ipu reg: Correct reserved1 array size in struct ipu_cm
Liu Ying
- [U-Boot] [PATCH v2 2/2] video: ipu reg: Correct reserved array size in struct ipu_idmac
Liu Ying
- [U-Boot] [PATCH v2 0/2] usb: gadget: fotg210: workaround & new hardware support
Kuo-Jung Su
- [U-Boot] [PATCH v2 0/2] usb: gadget: fotg210: workaround & new hardware support
Marek Vasut
- [U-Boot] [PATCH] ar8031/8033/phy:enable autonegotiation for ar8031/8033
Zhao Qiang
- [U-Boot] [PATCH 01/11 V12] EXYNOS5: Create a common board file
Minkyu Kang
- [U-Boot] [PATCH v3 1/4] mkexynosspl: fix uninitialized buffer
Minkyu Kang
- [U-Boot] [RFC][PATCH 0/7] TI: OMAP3: Use common config file.
Enric Balletbo Serra
- [U-Boot] [RFC][PATCH 1/7] ARM: OMAP4: Rename to ti_omap4_common.h
Lokesh Vutla
- [U-Boot] [RFC][PATCH 2/7] ARM: OMAP5: Rename to ti_omap5_common.h
Lokesh Vutla
- [U-Boot] [RFC][PATCH 3/7] TI: armv7: Move ELM support to SoC configuration file.
Lokesh Vutla
- [U-Boot] [PATCH v3 1/2] doc: README.fuse: Add an example on how to use the fuse API on mx6q
Fabio Estevam
- [U-Boot] [PATCH v3 2/2] mx6sabre_common.h: Add CONFIG_CMD_FUSE support
Fabio Estevam
- [U-Boot] [PATCH 2/2] vexpress: Add vexpress qemu variant
Ian Campbell
- [U-Boot] [PATCH v3 1/2] doc: README.fuse: Add an example on how to use the fuse API on mx6q
Benoît Thébaudeau
- [U-Boot] [PATCH] cosmetic: tools/scripts/README: insert only one space between words
Masahiro Yamada
- [U-Boot] [PATCH] tools: move kermit files to tools/kermit directory
Masahiro Yamada
- [U-Boot] Stack size
Parimala Baggiri
- [U-Boot] [PATCH v2 0/2] usb: gadget: fotg210: workaround & new hardware support
Kuo-Jung Su
- [U-Boot] [PATCH] net/designware: make driver compatible with data cache
Alexey Brodkin
- [U-Boot] [PATCH] net/designware: make driver compatible with data cache
Mischa Jonker
- [U-Boot] [PATCH 6/6] mx6: soc: Disable VDDPU regulator
Ranjani.Vaidyanathan at freescale.com
- [U-Boot] [PATCH] mmc/dwmmc: use bounce buffer for data exchange between CPU and MMC controller
Alexey Brodkin
- [U-Boot] Stack size
Wolfgang Denk
- [U-Boot] [PATCH] powerpc/T208xQDS: add mtdparts suppport
Shengzhou Liu
- [U-Boot] [PATCH v2 07/13] lib: tizen: change Tizen logo with the new one.
Hyungwon Hwang
- [U-Boot] [PATCH 1/3] mtd: onenand: Fix unaligned access
Marek Vasut
- [U-Boot] [PATCH 2/3] ARM: pxa: Fix OneNAND SPL builds
Marek Vasut
- [U-Boot] [PATCH 3/3] ARM: pxa: Fix OneNAND window access on VPAC270
Marek Vasut
- [U-Boot] [PATCH 1/4] arm: lager: Add support QSPI device and enable boot from SPI flash
Nobuhiro Iwamatsu
- [U-Boot] [PATCH 2/4] arm: koelsch: Add support QSPI device and enable boot from SPI flash
Nobuhiro Iwamatsu
- [U-Boot] [PATCH 3/4] arm: koelsch: Disable TMU0 before OS boot
Nobuhiro Iwamatsu
- [U-Boot] [PATCH 4/4] arm: lager: Disable TMU0 before OS boot
Nobuhiro Iwamatsu
- [U-Boot] [PATCH] arm: put .hash, .got.plt and .machine_param back in binaries
Rajeshwari Birje
- [U-Boot] [PATCH 00/11 V13] EXYNOS5420: Add SMDK5420 board support
Rajeshwari S Shinde
- [U-Boot] [PATCH 01/11 V13] EXYNOS5: Create a common board file
Rajeshwari S Shinde
- [U-Boot] [PATCH 02/11 V13] Exynos5420: Add base addresses for 5420
Rajeshwari S Shinde
- [U-Boot] [PATCH 03/11 V13] EXYNOS5420: Add power register structure.
Rajeshwari S Shinde
- [U-Boot] [PATCH 04/11] EXYNOS5420: Add dmc and phy_control register structure
Rajeshwari S Shinde
- [U-Boot] [PATCH 05/11 V13] Exynos5420: Add clock initialization for 5420
Rajeshwari S Shinde
- [U-Boot] [PATCH 06/11 V13] Exynos5420: Add DDR3 initialization for 5420
Rajeshwari S Shinde
- [U-Boot] [PATCH 07/11 V13] Exynos5420: Add support for 5420 in pinmux and gpio
Rajeshwari S Shinde
- [U-Boot] [PATCH 08/11 V13] Exynos5420: Add base patch for SMDK5420
Rajeshwari S Shinde
- [U-Boot] [PATCH 09/11 V13] DTS: Add dts support for SMDK5420
Rajeshwari S Shinde
- [U-Boot] [PATCH 10/11 V13] Config: Add initial config for SMDK5420
Rajeshwari S Shinde
- [U-Boot] [PATCH 11/11 V13] SPL: EXYNOS: Prepare for variable size SPL support
Rajeshwari S Shinde
- [U-Boot] [PATCH v2] socfpga/dwmmc: Adding DesignWare MMC driver support for SOCFPGA
Jaehoon Chung
- [U-Boot] [PATCH] board/t1040qds: Add memory reset control
Prabhakar Kushwaha
- [U-Boot] [PATCH] board/t1040qds: Add memory reset control
York Sun
- [U-Boot] [PATCH] mmc/dwmmc: use bounce buffer for data exchange between CPU and MMC controller
Jaehoon Chung
- [U-Boot] [PATCH][v2] board/t1040qds: Enable memory reset control
Prabhakar Kushwaha
- [U-Boot] [PATCH] mmc: Minor cleanup of sdhci.c
Jaehoon Chung
- [U-Boot] [PATCH] board:trats2: fix default partitions and mmc env
Jaehoon Chung
- [U-Boot] [PATCH v2] socfpga/dwmmc: Adding DesignWare MMC driver support for SOCFPGA
Wolfgang Denk
- [U-Boot] post in uboot
shobin b
- [U-Boot] [PATCH v5 00/10] sf: Add Extended read and quad read/write commands support
Jagannadha Sutradharudu Teki
- [U-Boot] [PATCH v5 01/10] sf: Add extended read commands support
Jagannadha Sutradharudu Teki
- [U-Boot] [PATCH v5 02/10] sf: Add quad read/write commands support
Jagannadha Sutradharudu Teki
- [U-Boot] [PATCH v5 03/10] sf: ops: Add configuration register writing support
Jagannadha Sutradharudu Teki
- [U-Boot] [PATCH v5 04/10] sf: Set quad enable bit support
Jagannadha Sutradharudu Teki
- [U-Boot] [PATCH v5 05/10] sf: probe: Enable RD_FULL and WR_QPP
Jagannadha Sutradharudu Teki
- [U-Boot] [PATCH v5 06/10] sf: Separate the flash params table
Jagannadha Sutradharudu Teki
- [U-Boot] [PATCH v5 07/10] sf: Add QUAD_IO_FAST read support
Jagannadha Sutradharudu Teki
- [U-Boot] [PATCH v5 08/10] sf: Discover read dummy_cycles
Jagannadha Sutradharudu Teki
- [U-Boot] [PATCH v5 09/10] sf: Add macronix set QEB support
Jagannadha Sutradharudu Teki
- [U-Boot] [PATCH v5 10/10] sf: params: Enable macronix quad cmds support
Jagannadha Sutradharudu Teki
- [U-Boot] [PATCH v2] mmc/dwmmc: use bounce buffer for data exchange between CPU and MMC controller
Alexey Brodkin
- [U-Boot] Stack size
Parimala Baggiri
- [U-Boot] Stack size
James Chargin
- [U-Boot] [PATCH v2 1/6] mx6: soc: Staticize set_vddsoc()
Fabio Estevam
- [U-Boot] [PATCH v2 2/6] mx6: soc: Clear the LDO ramp values up prior to setting the LDO voltages
Fabio Estevam
- [U-Boot] [PATCH v2 3/6] mx6: soc: Set the VDDSOC at 1.175 V
Fabio Estevam
- [U-Boot] [PATCH v2 4/6] mx6: soc: Introduce set_ldo_voltage()
Fabio Estevam
- [U-Boot] [PATCH v2 5/6] mx6: soc: Add the required LDO ramp up delay
Fabio Estevam
- [U-Boot] [PATCH v2 6/6] mx6: soc: Disable VDDPU regulator
Fabio Estevam
- [U-Boot] [PATCH 6/6] mx6: soc: Disable VDDPU regulator
Fabio Estevam
- [U-Boot] Stack size
Wolfgang Denk
- [U-Boot] post in uboot
Wolfgang Denk
- [U-Boot] [PATCH 0/8] Secure boot improvements and test on Beaglebone Black
Simon Glass
- [U-Boot] [PATCH 2/3] usb: ehci: Do not de-init uninited controllers
Simon Glass
- [U-Boot] [PATCH 3/3] usb: ehci: Fix register access
Simon Glass
- [U-Boot] [PATCH 1/3] usb: ehci-pci: Clarify and cleanup the EHCI controller detection
Simon Glass
- [U-Boot] [PATCH 1/3] mtd: onenand: Fix unaligned access
Rommel G Custodio
- [U-Boot] [PATCH v2] bootm: Reinstate special case for standalone images
Simon Glass
- [U-Boot] [PATCH] bootm: Reinstate special case for standalone images
Simon Glass
- [U-Boot] [PATCH REPOST3 1/2] ARM: rpi_b: power on SDHCI and USB HW modules
Stephen Warren
- [U-Boot] [PATCH REPOST3 2/2] ARM: bcm2835: fix mailbox timeout
Stephen Warren
- [U-Boot] [PATCH v2] mmc/dwmmc: use bounce buffer for data exchange between CPU and MMC controller
Jaehoon Chung
- [U-Boot] [PATCH v3 0/36] Switch over to real Kbuild
Masahiro Yamada
- [U-Boot] [PATCH v3 01/36] .gitignore: ingore files generated by Kbuild
Masahiro Yamada
- [U-Boot] [PATCH v3 02/36] Makefile.host.tmp: add a new script to refactor tools
Masahiro Yamada
- [U-Boot] [PATCH v3 03/36] tools: convert makefiles to kbuild style
Masahiro Yamada
- [U-Boot] [PATCH v3 04/36] board: samsung: refactor host programs
Masahiro Yamada
- [U-Boot] [PATCH v3 05/36] examples: Use scripts/Makefile.build
Masahiro Yamada
- [U-Boot] [PATCH v3 06/36] nand-spl: Use scripts/Makefile.build
Masahiro Yamada
- [U-Boot] [PATCH v3 07/36] Makfile: move suffix rules to Makefile.build
Masahiro Yamada
- [U-Boot] [PATCH v3 08/36] Makefile: move some variable definitions to the top Makefile
Masahiro Yamada
- [U-Boot] [PATCH v3 09/36] Makefile: move BFD_ROOT_DIR to tools/gdb/Makefile
Masahiro Yamada
- [U-Boot] [PATCH v3 10/36] Kbuild: import Kbuild.include from linux v3.12 tag
Masahiro Yamada
- [U-Boot] [PATCH v3 11/36] Kbuild: Use Kbuild.include
Masahiro Yamada
- [U-Boot] [PATCH v3 12/36] Makefile: move more flags to the top Makefile
Masahiro Yamada
- [U-Boot] [PATCH v3 13/36] Makefile: refactor include path settings
Masahiro Yamada
- [U-Boot] [PATCH v3 14/36] Makefile: move more stuff to top Makefile
Masahiro Yamada
- [U-Boot] [PATCH v3 15/36] Makefile: move some flags to spl/Makefile
Masahiro Yamada
- [U-Boot] [PATCH v3 16/36] Makefile: move some flags to examples makefiles
Masahiro Yamada
- [U-Boot] [PATCH v3 17/36] Kbuild: change out-of-tree build
Masahiro Yamada
- [U-Boot] [PATCH v3 18/36] Kbuild: add dummy obj-y to create built-in.o
Masahiro Yamada
- [U-Boot] [PATCH v3 19/36] Makefile: rename scripts/Makefile.build to scripts/Makefile.build.tmp
Masahiro Yamada
- [U-Boot] [PATCH v3 20/36] Kbuild: import more build scripts from Linux v3.12 tag
Masahiro Yamada
- [U-Boot] [PATCH v3 21/36] Kbuild: use Linux Kernel build scripts
Masahiro Yamada
- [U-Boot] [PATCH v3 22/36] Kbuild: delete temporary build scripts
Masahiro Yamada
- [U-Boot] [PATCH v3 23/36] Kbuild: move some lines to more suitable place
Masahiro Yamada
- [U-Boot] [PATCH v3 24/36] Kbuild: convert some make rules to Kbuild style
Masahiro Yamada
- [U-Boot] [PATCH v3 25/36] Kbuild: move include directives of board configuration files
Masahiro Yamada
- [U-Boot] [PATCH v3 26/36] Kbuild: generate {spl, tpl}-autoconf.mk only when it is necessary
Masahiro Yamada
- [U-Boot] [PATCH v3 27/36] Makefile: remove a cleaning target "tidy"
Masahiro Yamada
- [U-Boot] [PATCH v3 28/36] Kbuild: change the top Makefile to more Kbuild-ish structure
Masahiro Yamada
- [U-Boot] [PATCH v3 29/36] examples: move api/ and standalone/ to examples/Makefile
Masahiro Yamada
- [U-Boot] [PATCH v3 30/36] Kbuild: refactor Makefile and spl/Makefile more
Masahiro Yamada
- [U-Boot] [PATCH v3 31/36] Makefile: Do not pass MTD_VERSION from the top Makefile
Masahiro Yamada
- [U-Boot] [PATCH v3 32/36] Makefile: refactor tools-all targets
Masahiro Yamada
- [U-Boot] [PATCH v3 33/36] Kbuild: use scripts/Makefile.clean
Masahiro Yamada
- [U-Boot] [PATCH v3 34/36] Kbuild: support simultaneous board configuration and "make all"
Masahiro Yamada
- [U-Boot] [PATCH v3 35/36] Kbuild: check clean source and generate Makefile for out-of-tree build
Masahiro Yamada
- [U-Boot] [PATCH v3 36/36] board: sandburst: delete FORCEBUILD
Masahiro Yamada
- [U-Boot] Stack size
Parimala Baggiri
- [U-Boot] [PATCH] spi: sh_spi: Use sh_spi_clear_bit() instead of open-coded
Axel Lin
- [U-Boot] [PATCH] spi: sh_spi: Use sh_spi_clear_bit() instead of open-coded
Nobuhiro Iwamatsu
- [U-Boot] [PATCH] common/image.c: move VxWorks header string out of CONFIG_CMD_ELF
Miao Yan
- [U-Boot] [PATCH] ARM: tam3517-common: fix nand spl boot
Stefano Babic
- [U-Boot] [PATCH] ARM: twister: add missing gpio clock init
Stefano Babic
- [U-Boot] [PATCH 2/7 V3] mmc: Get secure erase information from card
Jaehoon Chung
- [U-Boot] [PATCH 1/7 V4] mmc: Add some usefull macro definition
Jaehoon Chung
- [U-Boot] [PATCH] boards.cfg: Keep the entries sorted
Fabio Estevam
- [U-Boot] Stack size
James Chargin
- [U-Boot] [PATCH] command.c: Fix auto-completion for the full commands list case
Andrew Gabbasov
- [U-Boot] Stack size
Wolfgang Denk
- [U-Boot] [PATCH 1/3] mtd: onenand: Fix unaligned access
Scott Wood
- [U-Boot] [PATCH 1/3] mtd: onenand: Fix unaligned access
Marek Vasut
- [U-Boot] [PATCH 1/3] mtd: onenand: Fix unaligned access
Lukasz Majewski
- [U-Boot] [PATCH 1/4] arm: lager: Add support QSPI device and enable boot from SPI flash
Jagan Teki
- [U-Boot] [PATCH 1/3] mtd: onenand: Fix unaligned access
Marek Vasut
- [U-Boot] [PATCH] ARM: HYP/non-sec: Propagate stack pointer to hyp mode
Ian Campbell
- [U-Boot] [PATCH] mmc: Minor cleanup of sdhci.c
Darwin Rambo
- [U-Boot] [PATCH 3/9] ARM: HYP/non-sec switch in bootm.c
TigerLiu at viatech.com.cn
- [U-Boot] [PATCH 2/7 V3] mmc: Get secure erase information from card
Zhang Haijun
- [U-Boot] [PATCH 1/7 V4] mmc: Add some usefull macro definition
Zhang Haijun
- [U-Boot] [PATCH 3/9] ARM: HYP/non-sec switch in bootm.c
Christoffer Dall
- [U-Boot] post in uboot
shobin b
- [U-Boot] [PATCH 3/9] ARM: HYP/non-sec switch in bootm.c
TigerLiu at viatech.com.cn
- [U-Boot] [PATCH 3/9] ARM: HYP/non-sec switch in bootm.c
Christoffer Dall
- [U-Boot] [PATCH 3/9] ARM: HYP/non-sec switch in bootm.c
TigerLiu at viatech.com.cn
- [U-Boot] [PATCH] powerpc/t2080qds: some update for t2080qds
Shengzhou Liu
- [U-Boot] sandbox question
TigerLiu at viatech.com.cn
- [U-Boot] [PATCH] powerpc/T208xQDS: add mtdparts suppport
Shengzhou.Liu at freescale.com
- [U-Boot] [PATCH 1/7 V5] mmc: Add some usefull macro definition
Haijun Zhang
- [U-Boot] [PATCH 2/7 V5] mmc: Get secure erase information from card
Haijun Zhang
- [U-Boot] [PATCH 3/7 V5] mmc: Enhance erase handling procedure
Haijun Zhang
- [U-Boot] [PATCH 4/7 V5] mmc: Update the handling of returned erase block
Haijun Zhang
- [U-Boot] [PATCH 5/7 V5] mmc: Enhance mmcinfo command
Haijun Zhang
- [U-Boot] [PATCH 6/7 V5] Powerpc/esdhc: Add esdhc host version define
Haijun Zhang
- [U-Boot] [PATCH 7/7 V5] powerpc/esdhc: Update esdhc command execution process
Haijun Zhang
- [U-Boot] [PATCH V2] board:trats2: fix default partitions and mmc env
Piotr Wilczek
- [U-Boot] [PATCH] board:trats2: fix default partitions and mmc env
Piotr Wilczek
- [U-Boot] [PATCH] i2c: fti2c010: fix compiler warning on paddr[]
Kuo-Jung Su
- [U-Boot] [PATCH v8 0/8] arm: add Faraday A36x SoC platform support
Kuo-Jung Su
- [U-Boot] [PATCH v8 1/8] arm: global_data: prepare for Faraday SoC support
Kuo-Jung Su
- [U-Boot] [PATCH v8 2/8] arm: make mmu_enabled() a global function
Kuo-Jung Su
- [U-Boot] [PATCH v8 3/8] arm: add Faraday ARM cores support
Kuo-Jung Su
- [U-Boot] [PATCH v8 4/8] arm: faraday: revise the DMA API
Kuo-Jung Su
- [U-Boot] [PATCH v8 5/8] arm: faraday: add FTPWMTMR010 timer support
Kuo-Jung Su
- [U-Boot] [PATCH v8 6/8] arm: faraday: add FTTMR010 timer support
Kuo-Jung Su
- [U-Boot] [PATCH v8 7/8] arm: faraday: add A360 SoC support
Kuo-Jung Su
- [U-Boot] [PATCH v8 8/8] arm: faraday: add A369 SoC support
Kuo-Jung Su
- [U-Boot] Stack size
Parimala Baggiri
- [U-Boot] [PATCH v2] fuelgauge: max17042: fix i2c read issue which causes infinity loop.
Przemyslaw Marczak
- [U-Boot] [PATCH v2] fuelgauge: max17042: fix i2c read issue which causes infinity loop.
Przemyslaw Marczak
- [U-Boot] [PATCH v2 07/13] lib: tizen: change Tizen logo with the new one.
Przemyslaw Marczak
- [U-Boot] Stack size
Wolfgang Denk
- [U-Boot] post in uboot
Wolfgang Denk
- [U-Boot] [PATCH v2] socfpga/dwmmc: Adding DesignWare MMC driver support for SOCFPGA
Chin Liang See
- [U-Boot] [PATCH v2] socfpga/dwmmc: Adding DesignWare MMC driver support for SOCFPGA
Chin Liang See
- [U-Boot] [PATCH v3] socfpga/dwmmc: Adding DesignWare MMC driver support for SOCFPGA
Chin Liang See
- [U-Boot] sandbox question
TigerLiu at viatech.com.cn
- [U-Boot] [PATCH] lzma: fix buffer bound check error
Antonios Vamporakis
- [U-Boot] Stack size
Parimala Baggiri
- [U-Boot] [PATCH 00/11 V13] EXYNOS5420: Add SMDK5420 board support
Minkyu Kang
- [U-Boot] [PATCH V2] board:trats2: fix default partitions and mmc env
Minkyu Kang
- [U-Boot] [PATCH] board:trats1:trats2: fix adapter number
Minkyu Kang
- [U-Boot] Stack size
Wolfgang Denk
- [U-Boot] [PATCH 1/3] mtd: onenand: Fix unaligned access
Lukasz Majewski
- [U-Boot] [PATCH] arm: omap: cm_t35: enable gpio bank 5 clocks explicitly
Nikita Kiryanov
- [U-Boot] [PULL] u-boot-onenand/master
Lukasz Majewski
- [U-Boot] [PATCH 1/4] arm: lager: Add support QSPI device and enable boot from SPI flash
Nobuhiro Iwamatsu
- [U-Boot] [PATCH] arm: omap: cm_t35: enable gpio bank 5 clocks explicitly
Igor Grinberg
- [U-Boot] [PATCH] wandboard: Set default environment to use zImage
Otavio Salvador
- [U-Boot] [PATCH] wandboard: Set default environment to use zImage
Fabio Estevam
Last message date:
Tue Dec 31 21:53:28 CET 2013
Archived on: Wed Feb 12 09:03:13 CET 2014
This archive was generated by
Pipermail 0.09 (Mailman edition).