[U-Boot] [PATCH v5 10/10] sf: params: Enable macronix quad cmds support

[Jagannadha Sutradharudu Teki]

Added macronix flash quad read/write commands support and
it's up to the respective controller driver usecase to
configure the respective commands by defining SPI RX/TX
operation modes from include/spi.h on the driver.

Signed-off-by: Jagannadha Sutradharudu Teki <jaganna at xilinx.com>
---
 drivers/mtd/spi/sf_params.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/mtd/spi/sf_params.c b/drivers/mtd/spi/sf_params.c
index ad101fb..4cdb4c2 100644
--- a/drivers/mtd/spi/sf_params.c
+++ b/drivers/mtd/spi/sf_params.c
@@ -40,10 +40,10 @@ const struct spi_flash_params spi_flash_params_table[] = {
 	{"MX25L1605D",	   0xc22015, 0x0,	64 * 1024,    32,	0,			  0},
 	{"MX25L3205D",	   0xc22016, 0x0,	64 * 1024,    64,	0,			  0},
 	{"MX25L6405D",	   0xc22017, 0x0,	64 * 1024,   128,	0,			  0},
-	{"MX25L12805",	   0xc22018, 0x0,	64 * 1024,   256,	0,			  0},
-	{"MX25L25635F",	   0xc22019, 0x0,	64 * 1024,   512,	0,			  0},
-	{"MX25L51235F",	   0xc2201a, 0x0,	64 * 1024,  1024,	0,			  0},
-	{"MX25L12855E",	   0xc22618, 0x0,	64 * 1024,   256,	0,			  0},
+	{"MX25L12805",	   0xc22018, 0x0,	64 * 1024,   256, RD_FULL,		     WR_QPP},
+	{"MX25L25635F",	   0xc22019, 0x0,	64 * 1024,   512, RD_FULL,		     WR_QPP},
+	{"MX25L51235F",	   0xc2201a, 0x0,	64 * 1024,  1024, RD_FULL,		     WR_QPP},
+	{"MX25L12855E",	   0xc22618, 0x0,	64 * 1024,   256, RD_FULL,		     WR_QPP},
 #endif
 #ifdef CONFIG_SPI_FLASH_SPANSION	/* SPANSION */
 	{"S25FL008A",	   0x010213, 0x0,	64 * 1024,    16,	0,			  0},
-- 
1.8.3