[U-Boot] [UBOOT][PATCH 0/2] misc fix for memory mapped support, dra config

[Sourav Poddar]

On Thursday 19 December 2013 12:25 PM, Jagan Teki wrote:
> On Thu, Dec 19, 2013 at 11:48 AM, Sourav Poddar<sourav.poddar at ti.com>  wrote:
>> On Thursday 19 December 2013 11:41 AM, Jagan Teki wrote:
>>> On Thu, Dec 19, 2013 at 10:36 AM, Sourav Poddar<sourav.poddar at ti.com>
>>> wrote:
>>>> Jagan,
>>>> On Thursday 14 November 2013 09:01 PM, Sourav Poddar wrote:
>>>>> Hi Jagan,
>>>>> Here are the miscellaneous fix and config update for dra7 qspi flash.
>>>>>
>>>>> Patch series adds:
>>>>> Add BAR config in dra7 config file.
>>>>> Set spi controller device control registers before
>>>>> doing a memory mapped read.
>>>>>
>>>>> Patches available here:
>>>>> git://gitorious.org/u-boot-shared/u-boot-qspi.git debug_dra_qspi
>>>>>
>>>>> Tested on dra7 evm with qspi boot.
>>>>>
>>>>> Sourav Poddar (2):
>>>>>      config: dra7_evm: Add Bank Address Register(BAR) config
>>>>>      driver: mtd: sf_ops: claim bus while doing memcpy
>>>>>
>>>>>     drivers/mtd/spi/sf_ops.c     |    6 ++++++
>>>>>     include/configs/dra7xx_evm.h |    1 +
>>>>>     2 files changed, 7 insertions(+), 0 deletions(-)
>>>>>
>>>> Ping on this.
>>>> This are miscellaneous fixes for dra7 qspi uboot.
>>>> Can you pick this up ?
>>> What is this series - I couldn't find it on patchwork.
>>> You sent a series with 0/5 and these two are part of that is it?
>>>
>> This is a differnet series for dra7 soc, it has miscellaneous cleanup
>> and fixes.
>>
>> The other series (0/5) is for qspi on am43x soc
> Applied to u-boot-spi/master
>
Thanks!